tinyriscv/tests/riscv-compliance/ChangeLog

282 lines
12 KiB
Plaintext

2020-04-24 Allen Baum <allen.baum@esperantotech.com>
* fixed the I-SB-01.S and I-SH-01.S tests and associated reference signatures to account
of tests with negative offsets (which causes stores outside the signature area)
2020-03-19 Neel Gala <neelgala@gmail.com>
* restructuring the riscv-test-suite to indicate clearly what is deprecated, wip and usable
tests.
* based on the above fixed the directory structure for riscv-targets where-ever applicable. Only
tested riscvOVPsim and spike.
* fixed script bugs for spike as well
* renamed rv32i/I-IO.S to rv32i/I-IO-01.S along with necessary changes to the reference files
and Makefrag
* renamed mbadaddr csr to mtval as raised in issue #31
* C.SWSP-01.S test updated to fix issue #37
2020-03-18 Neel Gala <neelgala@gmail.com>
* fixed doc/README.adoc with correct version to pass the sanity-check in the doc/Makefile
2020-02-07 Prashanth Mundkur <prashanth.mundkur@gmail.com>
* Support F extension on RV32 sail-riscv-c.
2019-12-01 Allen Baum <allen.baum@esperantotech.com>
* modified macro names to conformn to riscof naming convention of model specific vs. pre-defined
* add more complete list of macros, their uses, parameters, and whether they are required or optional
* minor structural changes (moving sentences, renumbering) and typo fixes
* clarified impact of debug macros
* clarified how SIGUPD and BASEUPD must be used
* remove section about test taxonomy, binary tests, emulated ops
* clarify/fix boundary between test target and framework responsibilities
(split test target into test target and test shell)
* remove To Be discussed items that have been discussed
* remove default case condition; if conditions are unchanged, part of same case
* minor grammatical changes related to the above
2019-10-16 Allen Baum <allen.baum@esperantotech.com>
* spec/TestFormatSpec.adoc: changed the format of the signature to fixed physical address size, fixed 32b data size extracted from COMPLIANCE_DATA_BEGIN/END range.
* more gramatical fixes, clarifications added
* added To Be Discussed items regarding emulated instruction and binary tests
2019-09-11 Allen Baum <allen.baum@esperantotech.com>
* spec/TestFormatSpec.adoc: more grammar and typo corrections and changes
clarified and added To Be Discussed issues
2019-09-11 Allen Baum <allen.baum@esperantotech.com>
* spec/TestFormatSpec.adoc: many grammar and typo corrections and changes
removed many "to Be Discussed items and made them official
Added wording to clarify spec intent (work in progress/goal rather than final)
Added macros to ease test authoring: RVTEST_SIGBASE, RVTEST_SIGUPDATE, RVTEST_CASE
Added detail on proposals for connection to framework (how framework selects tests).
Expanded definition of signature format
Changed the (proposed) directory structure and naming convention to eliminate ambiguities, add consistancy and slightly better match existing structure
Added many "future work" items related to the above
Added examples and comments to code examples to indicate how proposed macros would be used
* .gitignore: added condition to ignore Mac file system artifacts
2019-11-05 Lee Moore <moore@imperas.com>
* Restructured RV32I to move Zicsr and Zifencei into their own suites
2019-10-14 Lee Moore <moore@imperas.com>
* Added Ability to run a single test by using the Make Variable RISCV_TEST
for example, to only run the test I-ADD-01 from the rv32i suite
make RISCV_ISA=rv32i RISCV_TEST=I-ADD-01
* Added Top Level Variable to Makefile RISCV_TARGET_FLAGS,
in the case of the RISCV_TARGET this can be passed and appended to the invocation
commandline configuration, for example to pass a command line flag to the RISCV_TARGET
to perform tracing. The value of this flag will be target specific
make RISCV_ISA=rv32i RISCV_TEST=I-ADD-01 RISCV_TARGET_FLAGS="--trace"
This is has also been added to all other targets to allow target configuration from
the commandline
2019-10-07 Philipp Wagner <phw@lowrisc.org>
* When executing the test suite, Ibex always writes an instruction
log. Update the Makefile to write it to a test-specific location
(next to all other log files).
* On Ibex, provide an additional .objdump-noalias disassembly file
with no aliases and numeric register names (instead of ABI names).
This file matches the Ibex trace and can be used to debug the test
runs.
2019-08-29 Robert Balas <balasr@iis.ee.ethz.ch>
* Added support for using RI5CY as a target.
* Added subdirectory riscv-target/ri5cy
2019-08-08 Lee Moore <moore@imperas.com>
* Added support for lowRISC/ibex RTL as a target using Verilator.
In conjunction with Philipp Wagner of lowRISC phw@lowrisc.org
2019-07-18 Paul Donahue <pdonahue@ventanamicro.com>
* Fix typos/grammar and use correct architectural terms.
2019-06-21 Ben Selfridge <benselfridge@galois.com>
* Added support for using the the GRIFT simulator as a target.
* Added subdirectory riscv-target/grift
* updated README.md and doc/README.adoc
2019-05-23 Prashanth Mundkur <prashanth.mundkur@gmail.com>
* Added support and instructions for using the C and OCaml simulators from the Sail RISC-V formal model as targets.
* added subdirectories riscv-target/sail-riscv-c and riscv-target/sail-riscv-ocaml
* updated README.md and doc/README.adoc
2019-04-05 Allen Baum <allen.baum@esperantotech.com>
* spec/TestFormatSpec.adoc: Adding details, minor corrections, ToBeDiscussed
items and clarifications to the specification of the future compliance test
suite. Also removing restrictions on having absolate addresses in signature
2019-02-21 Lee Moore <moore@imperas.com>
* Fixed bug in RVTEST_IO_ASSERT_GPR_EQ which was not preserving register t0
* Corrected commit I-LUI-01.S, register target changed but missed assertion
2019-02-21 Deborah Soung <debs@sifive.com>
* added RiscvFormalSpec as a target with its own unique environment
2019-02-15 Radek Hajek <radek.hajek@codasip.com>
* updated rv32i tests to support all registers (x31) with assertions
* updated spec/TestFormatSpec.adoc example ISA test with new assertions
2019-02-05 Deborah Soung <debs@sifive.com>
* [Issue #33] fixing rv32si/ma_fetch.S test
* [Issue #32] fixing breakpoint test
2019-02-01 Lee Moore <moore@imperas.com>
* updated Infrastructure macros to support non-volatile registers
* updated riscvOVPsim
2019-01-29 Deborah Soung <debs@sifive.com>
* Added Rocket Chip generated cores as a target
* riscv-target/rocket/compliance_io.h created
* riscv-target/rocket/compliance_test.h created
* riscv-target/rocket/*/Makefile.include created for existing test suites
* README.adoc updated with instructions for using Rocket cores as targets
2019-01-22 Premysl Vaclavik <pvaclavik@codasip.com>
* feature: initial version of Compliance Test Format Specification
* This new document outlines how we should like the compliance
system to work going forward. By contrast the doc/README.adoc file
describes the current system as it is.
* Approved at Compliance TG meeting of 9 Jan 2019.
2019-01-02 Radek Hajek <radek.hajek@codasip.com>
* unified macros in all compliance tests
2018-12-20 Lee Moore <moore@imperas.com>
* fixed riscvOVPsim
2018-11-22 Simon Davidmann <simond@imperas.com>
* added information on test suite status
2018-11-21 Olof Kindgren <olof.kindgren@gmail.com>
* Added support for using external target directories with $TARGETDIR
2018-11-21 Neel Gala <neelgala@incoresemi.com>
* riscv-test-suite/rv_/references/_.reference_output: changed signature
format for all tests to include only 4-bytes per line starting with the
most significant byte on the left.
* riscv-target/spike/device/rv_/Makefile.include: Added a patch for
spike-device Makefiles where the old-signature format is post-processed
to generate a signature in the new format at the end of each test.
* riscv-target/riscvOVPsim/device/rv_/Makefile.include: same patch as above.
* Makefile: default target for Makefile is now to run all tests supported by
the target mentioned defined by RISCV_TARGET variable.
2018-10-11 Simon Davidmann <simond@imperas.com>
* Ported github riscv/riscv-tests for RV32 processors to this compliance env
* rv32ua rv32uc rv32ud rv32uf rv32ud rv32ui
2018-09-10 Lee Moore <moore@imperas.com>
* Added tests to RV32I to improve coverage, usage of Imperas Mutating Fault Simulator to
identify untested usage cases
* Macro renames to support GPR, (S)FPR, (D)FPR
* Added test suite RV32IM to test 32 bit Multiply and Divide instructions
* Added test suite RV32IMC to test 32 bit Compressed instructions
* Added test suite RV64I to test 64 bit Integer instructions
* Added test suite RV64IM to test 64 bit Multiply and Divide instructions
2018-06-15 Radek Hajek <hajek@codasip.com>
Modifications to support Codasip simulator.
The simulator is renamed as Codasip-simulator (was
Codasip-IA-simulator), compliance_test.h has been moved to target
directories and a COMPILE_TARGET has been added to Makefile to
allow use of LLVM.
* Makefile: Include Codasip simulator target.
* riscv-target/codasip-IA-simulator/compliance_io.h: Renamed as
riscv-target/Codasip-simulator/compliance_io.h.
* riscv-target/Codasip-simulator/compliance_io.h: Renamed from
riscv-target/codasip-IA-simulator/compliance_io.
* riscv-target/Codasip-simulator/compliance_test.h: Created.
* riscv-target/codasip-IA-simulator/device/rv32i/Makefile.include:
Renamed as
riscv-target/Codasip-simulator/device/rv32i/Makefile.include
* riscv-target/Codasip-simulator/device/rv32i/Makefile.include:
Renamed from
riscv-target/codasip-IA-simulator/device/rv32i/Makefile.include.
* riscv-test-env/compliance_test.h: Renamed as
riscv-target/riscvOVPsim/compliance_test.h.
* riscv-target/riscvOVPsim/compliance_test.h: Renamed from
riscv-test-env/compliance_test.h.
* riscv-target/riscvOVPsim/device/rv32i/Makefile.include: Updated
for new environment.
* riscv-target/spike/compliance_test.h: Created.
* riscv-target/spike/device/rv32i/Makefile.include: Updated for
new environment.
* riscv-test-suite/rv32i/Makefile: Likewise.
2018-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com>
Put placeholders in empty directories to make sure they show in
the GitHub hierarchy.
* riscv-test-suite/rv32i/.gitignore: Created.
* riscv-test-suite/rv32m/.gitignore: Created.
2018-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com>
* README.md: Make references to files in the repo into links.
2018-06-09 Jeremy Bennett <jeremy.bennett@embecosm.com>
* .gitignore: Ignore editor backup files.
2018-06-09 Jeremy Bennett <jeremy.bennett@embecosm.com>
* README.md: Add better link to documentation README.md.
2018-06-08 Jeremy Bennett <jeremy.bennett@embecosm.com>
* README.md: Move AsciiDoc details into new README.md in the doc
directory.
2018-06-08 Jeremy Bennett <jeremy.bennett@embecosm.com>
* README.md: Fix typo in link to AsciiDoc cheat sheet
2018-06-08 Jeremy Bennett <jeremy.bennett@embecosm.com>
* COPYING.BSD: Created.
* COPYING.CC: Created.
* README.md: Add git process, licensing and engineering process.
2018-06-08 Jeremy Bennett <jeremy.bennett@embecosm.com>
* README.md: Correct details for running the compliance tests and
directory for OVPsim.
2018-06-08 Jeremy Bennett <jeremy.bennett@embecosm.com>
Clean restructuring to just the work of interest.
* thought-experiments: Directory removed.
* .gitignore: Merged with TestStructure/.gitignore
* Makefile: Renamed from TestStructure/Makefile.
* TestStructure/Makefile: Renamed as Makefile.
* README.md: Merged with TestStructure/README.md.
* TestStructure/.gitignore: Deleted and contents moved into
.gitignore.
* TestStructure/README.md: Deleted and contents moved into
README.md.
* TestStructure/doc: Directory deleted.
* TestStructure/riscv-target: Directory moved to riscv-target.
* riscv-target: Directory moved from TestStructure/riscv-target
* TestStructure/riscv-test-env: Directory moved to riscv-test-env.
* riscv-test-env: Directory moved from
TestStructure/riscv-test-env.
* TestStructure/riscv-test-suite: Directory moved to
riscv-test-suite.
* riscv-test-suite: Directory moved from
TestStructure/riscv-test-suite.
* thought-experiments: Directory deleted.
2018-05-21 Jeremy Bennett <jeremy.bennett@embecosm.com>
Initial commit to populate the repository.
* ChangeLog: Created.
* README.md: Created.