diff --git a/rtl/core/exu_mem.sv b/rtl/core/exu_mem.sv index f362b45..8042319 100644 --- a/rtl/core/exu_mem.sv +++ b/rtl/core/exu_mem.sv @@ -183,7 +183,7 @@ module exu_mem( endcase end - assign mem_req_o = req_mem_i; + assign mem_req_o = req_mem_i && (state_q == S_IDLE); assign mem_addr_o = mem_addr_i; // 暂停流水线 diff --git a/rtl/debug/jtag_dm.sv b/rtl/debug/jtag_dm.sv index 7673fd6..a7c007b 100644 --- a/rtl/debug/jtag_dm.sv +++ b/rtl/debug/jtag_dm.sv @@ -58,6 +58,8 @@ module jtag_dm #( input wire [31:0] slave_addr_i, input wire [3:0] slave_be_i, input wire [31:0] slave_wdata_i, + output wire slave_gnt_o, + output wire slave_rvalid_o, output wire [31:0] slave_rdata_o ); @@ -497,6 +499,8 @@ module jtag_dm #( .addr_i(slave_addr_i), .be_i(slave_be_i), .wdata_i(slave_wdata_i), + .gnt_o(slave_gnt_o), + .rvalid_o(slave_rvalid_o), .rdata_o(slave_rdata_o) ); diff --git a/rtl/debug/jtag_mem.sv b/rtl/debug/jtag_mem.sv index 6caf05b..b00cbe8 100644 --- a/rtl/debug/jtag_mem.sv +++ b/rtl/debug/jtag_mem.sv @@ -43,6 +43,8 @@ module jtag_mem( input wire [31:0] addr_i, input wire [3:0] be_i, input wire [31:0] wdata_i, + output wire gnt_o, + output wire rvalid_o, output wire [31:0] rdata_o ); @@ -180,6 +182,7 @@ module jtag_mem( reg data_valid; reg cmdbusy; reg halted_aligned; + reg rvalid_q; wire fwd_rom_d; wire[31:0] rom_rdata; reg[31:0] data_bits; @@ -204,7 +207,8 @@ module jtag_mem( assign halted_o = halted_q; assign resumeack_o = resuming_q; - + assign gnt_o = req_i; + assign rvalid_o = rvalid_q; always @ (*) begin state_d = state_q; @@ -292,7 +296,7 @@ module jtag_mem( end // write - if (we_i) begin + if (req_i & we_i) begin case (addr_i[DbgAddressBits-1:0]) HaltedAddr: begin halted_d = 1'b1; @@ -328,7 +332,7 @@ module jtag_mem( default:; endcase // read - end else begin + end else if (req_i & (!we_i)) begin case (addr_i[DbgAddressBits-1:0]) WhereToAddr: begin if (cmdbusy & (cmd_type == CmdAccessRegister)) begin @@ -472,12 +476,11 @@ module jtag_mem( wire[31:0] rom_addr; assign rom_addr = addr_i; - assign fwd_rom_d = addr_i[DbgAddressBits-1:0] >= `HaltAddress; debug_rom u_debug_rom ( .clk_i ( clk ), - .req_i ( 1'b1 ), + .req_i ( req_i ), .addr_i ( rom_addr ), .rdata_o ( rom_rdata ) ); @@ -488,11 +491,13 @@ module jtag_mem( fwd_rom_q <= 1'b0; halted_q <= 1'b0; resuming_q <= 1'b0; + rvalid_q <= 1'b0; end else begin rdata_q <= rdata_d; fwd_rom_q <= fwd_rom_d; halted_q <= halted_d; resuming_q <= resuming_d; + rvalid_q <= req_i; end end diff --git a/rtl/debug/jtag_top.sv b/rtl/debug/jtag_top.sv index 49c9d04..22dd12c 100644 --- a/rtl/debug/jtag_top.sv +++ b/rtl/debug/jtag_top.sv @@ -45,6 +45,8 @@ module jtag_top( input wire [31:0] slave_addr_i, input wire [3:0] slave_be_i, input wire [31:0] slave_wdata_i, + output wire slave_gnt_o, + output wire slave_rvalid_o, output wire [31:0] slave_rdata_o ); @@ -88,6 +90,8 @@ module jtag_top( .slave_addr_i (slave_addr_i), .slave_be_i (slave_be_i), .slave_wdata_i (slave_wdata_i), + .slave_gnt_o (slave_gnt_o), + .slave_rvalid_o (slave_rvalid_o), .slave_rdata_o (slave_rdata_o) ); diff --git a/rtl/perips/gpio/gpio_top.sv b/rtl/perips/gpio/gpio_top.sv index cb81fd1..ac5c8f4 100644 --- a/rtl/perips/gpio/gpio_top.sv +++ b/rtl/perips/gpio/gpio_top.sv @@ -34,6 +34,8 @@ module gpio_top #( input logic [ 3:0] be_i, input logic [31:0] addr_i, input logic [31:0] data_i, + output logic gnt_o, + output logic rvalid_o, output logic [31:0] data_o ); @@ -42,6 +44,8 @@ module gpio_top #( logic [31:0] addr; logic [31:0] reg_rdata; + assign gnt_o = req_i; + // 读信号 assign re = req_i & (!we_i); // 写信号 @@ -49,6 +53,16 @@ module gpio_top #( // 去掉基地址 assign addr = {16'h0, addr_i[15:0]}; + always_ff @(posedge clk_i or negedge rst_ni) begin + if (!rst_ni) begin + rvalid_o <= '0; + data_o <= '0; + end else begin + rvalid_o <= req_i; + data_o <= reg_rdata; + end + end + gpio_core #( .GPIO_NUM(GPIO_NUM) ) u_gpio_core ( @@ -69,8 +83,4 @@ module gpio_top #( .reg_rdata_o(reg_rdata) ); - always_ff @(posedge clk_i) begin - data_o <= reg_rdata; - end - endmodule diff --git a/rtl/perips/i2c/i2c_top.sv b/rtl/perips/i2c/i2c_top.sv index 652ddd5..061874b 100644 --- a/rtl/perips/i2c/i2c_top.sv +++ b/rtl/perips/i2c/i2c_top.sv @@ -33,6 +33,8 @@ module i2c_top ( input logic [ 3:0] be_i, input logic [31:0] addr_i, input logic [31:0] data_i, + output logic gnt_o, + output logic rvalid_o, output logic [31:0] data_o ); @@ -41,6 +43,8 @@ module i2c_top ( logic [31:0] addr; logic [31:0] reg_rdata; + assign gnt_o = req_i; + // 读信号 assign re = req_i & (!we_i); // 写信号 @@ -48,6 +52,16 @@ module i2c_top ( // 去掉基地址 assign addr = {16'h0, addr_i[15:0]}; + always_ff @(posedge clk_i or negedge rst_ni) begin + if (!rst_ni) begin + rvalid_o <= '0; + data_o <= '0; + end else begin + rvalid_o <= req_i; + data_o <= reg_rdata; + end + end + i2c_core u_i2c_core ( .clk_i (clk_i), .rst_ni (rst_ni), @@ -66,8 +80,4 @@ module i2c_top ( .reg_rdata_o(reg_rdata) ); - always_ff @(posedge clk_i) begin - data_o <= reg_rdata; - end - endmodule diff --git a/rtl/perips/ram.sv b/rtl/perips/ram.sv index a8c6a4d..8f0d318 100644 --- a/rtl/perips/ram.sv +++ b/rtl/perips/ram.sv @@ -18,19 +18,36 @@ module ram #( - parameter DP = 4096)( - - input wire clk, - input wire rst_n, - input wire[31:0] addr_i, - input wire[31:0] data_i, - input wire[3:0] sel_i, - input wire we_i, - output wire[31:0] data_o + parameter DP = 4096 + )( + input wire clk_i, + input wire rst_ni, + input wire req_i, + input wire we_i, + input wire [ 3:0] be_i, + input wire [31:0] addr_i, + input wire [31:0] data_i, + output wire gnt_o, + output wire rvalid_o, + output wire [31:0] data_o ); - wire[31:0] addr = {6'h0, addr_i[27:2]}; + reg rvalid_q; + wire[31:0] addr; + + assign addr = {6'h0, addr_i[27:2]}; + assign gnt_o = req_i; + + always @(posedge clk_i or negedge rst_ni) begin + if (!rst_ni) begin + rvalid_q <= 1'b0; + end else begin + rvalid_q <= req_i; + end + end + + assign rvalid_o = rvalid_q; gen_ram #( .DP(DP), @@ -38,10 +55,10 @@ module ram #( .MW(4), .AW(32) ) u_gen_ram( - .clk(clk), + .clk(clk_i), .addr_i(addr), .data_i(data_i), - .sel_i(sel_i), + .sel_i(be_i), .we_i(we_i), .data_o(data_o) ); diff --git a/rtl/perips/rom.sv b/rtl/perips/rom.sv index feca24b..601f3f1 100644 --- a/rtl/perips/rom.sv +++ b/rtl/perips/rom.sv @@ -18,19 +18,36 @@ module rom #( - parameter DP = 4096)( - - input wire clk, - input wire rst_n, - input wire[31:0] addr_i, - input wire[31:0] data_i, - input wire[3:0] sel_i, - input wire we_i, - output wire[31:0] data_o + parameter DP = 4096 + )( + input wire clk_i, + input wire rst_ni, + input wire req_i, + input wire we_i, + input wire [ 3:0] be_i, + input wire [31:0] addr_i, + input wire [31:0] data_i, + output wire gnt_o, + output wire rvalid_o, + output wire [31:0] data_o ); - wire[31:0] addr = {6'h0, addr_i[27:2]}; + reg rvalid_q; + wire[31:0] addr; + + assign addr = {6'h0, addr_i[27:2]}; + assign gnt_o = req_i; + + always @(posedge clk_i or negedge rst_ni) begin + if (!rst_ni) begin + rvalid_q <= 1'b0; + end else begin + rvalid_q <= req_i; + end + end + + assign rvalid_o = rvalid_q; gen_ram #( .DP(DP), @@ -38,10 +55,10 @@ module rom #( .MW(4), .AW(32) ) u_gen_ram( - .clk(clk), + .clk(clk_i), .addr_i(addr), .data_i(data_i), - .sel_i(sel_i), + .sel_i(be_i), .we_i(we_i), .data_o(data_o) ); diff --git a/rtl/perips/rvic/rvic_top.sv b/rtl/perips/rvic/rvic_top.sv index c52aa1a..f13f44e 100644 --- a/rtl/perips/rvic/rvic_top.sv +++ b/rtl/perips/rvic/rvic_top.sv @@ -28,6 +28,8 @@ module rvic_top ( input logic [ 3:0] be_i, input logic [31:0] addr_i, input logic [31:0] data_i, + output logic gnt_o, + output logic rvalid_o, output logic [31:0] data_o ); @@ -36,6 +38,8 @@ module rvic_top ( logic [31:0] addr; logic [31:0] reg_rdata; + assign gnt_o = req_i; + // 读信号 assign re = req_i & (!we_i); // 写信号 @@ -43,6 +47,16 @@ module rvic_top ( // 去掉基地址 assign addr = {16'h0, addr_i[15:0]}; + always_ff @(posedge clk_i or negedge rst_ni) begin + if (!rst_ni) begin + rvalid_o <= '0; + data_o <= '0; + end else begin + rvalid_o <= req_i; + data_o <= reg_rdata; + end + end + rvic_core u_rvic_core ( .clk_i (clk_i), .rst_ni (rst_ni), @@ -57,8 +71,4 @@ module rvic_top ( .reg_rdata_o(reg_rdata) ); - always_ff @(posedge clk_i) begin - data_o <= reg_rdata; - end - endmodule diff --git a/rtl/perips/timer/timer_top.sv b/rtl/perips/timer/timer_top.sv index 8d233c3..abaa307 100644 --- a/rtl/perips/timer/timer_top.sv +++ b/rtl/perips/timer/timer_top.sv @@ -26,6 +26,8 @@ module timer_top ( input logic [ 3:0] be_i, input logic [31:0] addr_i, input logic [31:0] data_i, + output logic gnt_o, + output logic rvalid_o, output logic [31:0] data_o ); @@ -34,6 +36,8 @@ module timer_top ( logic [31:0] addr; logic [31:0] reg_rdata; + assign gnt_o = req_i; + // 读信号 assign re = req_i & (!we_i); // 写信号 @@ -41,6 +45,16 @@ module timer_top ( // 去掉基地址 assign addr = {16'h0, addr_i[15:0]}; + always_ff @(posedge clk_i or negedge rst_ni) begin + if (!rst_ni) begin + rvalid_o <= '0; + data_o <= '0; + end else begin + rvalid_o <= req_i; + data_o <= reg_rdata; + end + end + timer_core u_timer_core ( .clk_i (clk_i), .rst_ni (rst_ni), @@ -53,8 +67,4 @@ module timer_top ( .reg_rdata_o(reg_rdata) ); - always_ff @(posedge clk_i) begin - data_o <= reg_rdata; - end - endmodule diff --git a/rtl/perips/uart/uart_top.sv b/rtl/perips/uart/uart_top.sv index 4d68d76..b21693e 100644 --- a/rtl/perips/uart/uart_top.sv +++ b/rtl/perips/uart/uart_top.sv @@ -28,6 +28,8 @@ module uart_top ( input logic [ 3:0] be_i, input logic [31:0] addr_i, input logic [31:0] data_i, + output logic gnt_o, + output logic rvalid_o, output logic [31:0] data_o ); @@ -36,6 +38,8 @@ module uart_top ( logic [31:0] addr; logic [31:0] reg_rdata; + assign gnt_o = req_i; + // 读信号 assign re = req_i & (!we_i); // 写信号 @@ -43,6 +47,16 @@ module uart_top ( // 去掉基地址 assign addr = {16'h0, addr_i[15:0]}; + always_ff @(posedge clk_i or negedge rst_ni) begin + if (!rst_ni) begin + rvalid_o <= '0; + data_o <= '0; + end else begin + rvalid_o <= req_i; + data_o <= reg_rdata; + end + end + uart_core u_uart_core ( .clk_i (clk_i), .rst_ni (rst_ni), @@ -57,8 +71,4 @@ module uart_top ( .reg_rdata_o(reg_rdata) ); - always_ff @(posedge clk_i) begin - data_o <= reg_rdata; - end - endmodule diff --git a/rtl/sys_bus/obi_interconnect.sv b/rtl/sys_bus/obi_interconnect.sv index 6f7f3c8..97954a5 100644 --- a/rtl/sys_bus/obi_interconnect.sv +++ b/rtl/sys_bus/obi_interconnect.sv @@ -15,12 +15,12 @@ */ // obi总线交叉互联矩阵，支持一对多、多对一、多对多 -// master之间采用优先级总裁方式，LSB优先级最高，MSB优先级最低 +// master之间采用优先级总裁方式：LSB优先级最高，MSB优先级最低 module obi_interconnect #( - parameter int MASTERS = 3, // number of masters - parameter int SLAVES = 5, // number of slaves - parameter MASTER_BITS = MASTERS == 1 ? 1 : $clog2(MASTERS), - parameter SLAVE_BITS = SLAVES == 1 ? 1 : $clog2(SLAVES) + parameter int MASTERS = 3, // number of masters + parameter int SLAVES = 5, // number of slaves + parameter MASTER_BITS = MASTERS == 1 ? 1 : $clog2(MASTERS), // do not change + parameter SLAVE_BITS = SLAVES == 1 ? 1 : $clog2(SLAVES) // do not change )( input logic clk_i, input logic rst_ni, @@ -93,7 +93,7 @@ module obi_interconnect #( // slave信号赋值 generate - for (s = 0; s < SLAVES; s = s + 1) begin: slave_signal + for (s = 0; s < SLAVES; s = s + 1) begin: slave_signals assign slave_req_o[s] = master_req_i[master_sel_int[s]] & granted_master[s]; assign slave_we_o[s] = master_we_i[master_sel_int[s]] & granted_master[s]; assign slave_be_o[s] = master_be_i[master_sel_int[s]]; @@ -102,45 +102,39 @@ module obi_interconnect #( end endgenerate + // 真正被slaves选中的master logic [MASTERS-1:0] master_sel_or; always_comb begin master_sel_or = 'b0; for (integer i = 0; i < SLAVES; i = i + 1) begin: gen_master_sel_or_vec - master_sel_or = master_sel_or | master_sel_vec[i]; + master_sel_or = master_sel_or | (master_sel_vec[i] & {MASTERS{granted_master[i]}}); end end + // 保存master选中的slave logic [SLAVE_BITS-1:0] slave_sel_int_q[MASTERS]; generate - for (m = 0; m < MASTERS; m = m + 1) begin: master_data_q + for (m = 0; m < MASTERS; m = m + 1) begin: gen_save_selected_slaves always_ff @ (posedge clk_i or negedge rst_ni) begin if (!rst_ni) begin slave_sel_int_q[m] <= 'b0; end else begin - slave_sel_int_q[m] <= slave_sel_int[m]; + if (slave_gnt_i[slave_sel_int[m]] & master_sel_or[m]) begin + slave_sel_int_q[m] <= slave_sel_int[m]; + end end end end endgenerate - logic [MASTERS-1:0] master_sel_or_q; - - always_ff @ (posedge clk_i or negedge rst_ni) begin - if (!rst_ni) begin - master_sel_or_q <= 'b0; - end else begin - master_sel_or_q <= master_sel_or; - end - end - // master信号赋值 generate - for (m = 0; m < MASTERS; m = m + 1) begin: master_data - assign master_gnt_o[m] = master_sel_or[m]; - assign master_rdata_o[m] = slave_rdata_i[slave_sel_int_q[m]]; - assign master_rvalid_o[m] = master_sel_or_q[m]; + for (m = 0; m < MASTERS; m = m + 1) begin: master_signals + assign master_gnt_o[m] = slave_gnt_i[slave_sel_int[m]] & master_sel_or[m]; + assign master_rdata_o[m] = slave_rdata_i[slave_sel_int_q[m]]; + assign master_rvalid_o[m] = slave_rvalid_i[slave_sel_int_q[m]]; end endgenerate diff --git a/rtl/top/tinyriscv_soc_top.sv b/rtl/top/tinyriscv_soc_top.sv index 04f826c..68106c1 100644 --- a/rtl/top/tinyriscv_soc_top.sv +++ b/rtl/top/tinyriscv_soc_top.sv @@ -185,13 +185,16 @@ module tinyriscv_soc_top #( rom #( .DP(`ROM_DEPTH) ) u_rom ( - .clk (clk), - .rst_n (ndmreset_n), - .addr_i (slave_addr[Rom]), - .data_i (slave_wdata[Rom]), - .sel_i (slave_be[Rom]), - .we_i (slave_we[Rom]), - .data_o (slave_rdata[Rom]) + .clk_i (clk), + .rst_ni (ndmreset_n), + .req_i (slave_req[Rom]), + .addr_i (slave_addr[Rom]), + .data_i (slave_wdata[Rom]), + .be_i (slave_be[Rom]), + .we_i (slave_we[Rom]), + .gnt_o (slave_gnt[Rom]), + .rvalid_o (slave_rvalid[Rom]), + .data_o (slave_rdata[Rom]) ); assign slave_addr_mask[Ram] = `RAM_ADDR_MASK; @@ -200,28 +203,33 @@ module tinyriscv_soc_top #( ram #( .DP(`RAM_DEPTH) ) u_ram ( - .clk (clk), - .rst_n (ndmreset_n), - .addr_i (slave_addr[Ram]), - .data_i (slave_wdata[Ram]), - .sel_i (slave_be[Ram]), - .we_i (slave_we[Ram]), - .data_o (slave_rdata[Ram]) + .clk_i (clk), + .rst_ni (ndmreset_n), + .req_i (slave_req[Ram]), + .addr_i (slave_addr[Ram]), + .data_i (slave_wdata[Ram]), + .be_i (slave_be[Ram]), + .we_i (slave_we[Ram]), + .gnt_o (slave_gnt[Ram]), + .rvalid_o (slave_rvalid[Ram]), + .data_o (slave_rdata[Ram]) ); assign slave_addr_mask[Timer0] = `TIMER0_ADDR_MASK; assign slave_addr_base[Timer0] = `TIMER0_ADDR_BASE; // 3.定时器0模块 timer_top timer0( - .clk_i (clk), - .rst_ni (ndmreset_n), - .irq_o (timer0_irq), - .req_i (slave_req[Timer0]), - .we_i (slave_we[Timer0]), - .be_i (slave_be[Timer0]), - .addr_i (slave_addr[Timer0]), - .data_i (slave_wdata[Timer0]), - .data_o (slave_rdata[Timer0]) + .clk_i (clk), + .rst_ni (ndmreset_n), + .irq_o (timer0_irq), + .req_i (slave_req[Timer0]), + .we_i (slave_we[Timer0]), + .be_i (slave_be[Timer0]), + .addr_i (slave_addr[Timer0]), + .data_i (slave_wdata[Timer0]), + .gnt_o (slave_gnt[Timer0]), + .rvalid_o(slave_rvalid[Timer0]), + .data_o (slave_rdata[Timer0]) ); for (genvar i = 0; i < GPIO_NUM; i = i + 1) begin : g_gpio_data @@ -249,6 +257,8 @@ module tinyriscv_soc_top #( .be_i (slave_be[Gpio]), .addr_i (slave_addr[Gpio]), .data_i (slave_wdata[Gpio]), + .gnt_o (slave_gnt[Gpio]), + .rvalid_o (slave_rvalid[Gpio]), .data_o (slave_rdata[Gpio]) ); @@ -256,17 +266,19 @@ module tinyriscv_soc_top #( assign slave_addr_base[Uart0] = `UART0_ADDR_BASE; // 5.串口0模块 uart_top uart0 ( - .clk_i (clk), - .rst_ni (ndmreset_n), - .rx_i (uart_rx_pin), - .tx_o (uart_tx_pin), - .irq_o (uart0_irq), - .req_i (slave_req[Uart0]), - .we_i (slave_we[Uart0]), - .be_i (slave_be[Uart0]), - .addr_i (slave_addr[Uart0]), - .data_i (slave_wdata[Uart0]), - .data_o (slave_rdata[Uart0]) + .clk_i (clk), + .rst_ni (ndmreset_n), + .rx_i (uart_rx_pin), + .tx_o (uart_tx_pin), + .irq_o (uart0_irq), + .req_i (slave_req[Uart0]), + .we_i (slave_we[Uart0]), + .be_i (slave_be[Uart0]), + .addr_i (slave_addr[Uart0]), + .data_i (slave_wdata[Uart0]), + .gnt_o (slave_gnt[Uart0]), + .rvalid_o (slave_rvalid[Uart0]), + .data_o (slave_rdata[Uart0]) ); assign slave_addr_mask[Rvic] = `RVIC_ADDR_MASK; @@ -283,6 +295,8 @@ module tinyriscv_soc_top #( .be_i (slave_be[Rvic]), .addr_i (slave_addr[Rvic]), .data_i (slave_wdata[Rvic]), + .gnt_o (slave_gnt[Rvic]), + .rvalid_o (slave_rvalid[Rvic]), .data_o (slave_rdata[Rvic]) ); @@ -309,6 +323,8 @@ module tinyriscv_soc_top #( .be_i (slave_be[I2c0]), .addr_i (slave_addr[I2c0]), .data_i (slave_wdata[I2c0]), + .gnt_o (slave_gnt[I2c0]), + .rvalid_o (slave_rvalid[I2c0]), .data_o (slave_rdata[I2c0]) ); @@ -317,16 +333,17 @@ module tinyriscv_soc_top #( assign slave_addr_base[SimCtrl] = `SIM_CTRL_ADDR_BASE; // 8.仿真控制模块 sim_ctrl u_sim_ctrl( - .clk_i (clk), - .rst_ni (ndmreset_n), + .clk_i (clk), + .rst_ni (ndmreset_n), .dump_wave_en_o(dump_wave_en_o), - .req_i (), - .gnt_o (), - .addr_i (slave_addr[SimCtrl]), - .we_i (slave_we[SimCtrl]), - .be_i (slave_be[SimCtrl]), - .wdata_i(slave_wdata[SimCtrl]), - .rdata_o(slave_rdata[SimCtrl]) + .req_i (slave_req[SimCtrl]), + .gnt_o (slave_gnt[SimCtrl]), + .addr_i (slave_addr[SimCtrl]), + .we_i (slave_we[SimCtrl]), + .be_i (slave_be[SimCtrl]), + .wdata_i (slave_wdata[SimCtrl]), + .rvalid_o (slave_rvalid[SimCtrl]), + .rdata_o (slave_rdata[SimCtrl]) ); `endif @@ -359,6 +376,8 @@ module tinyriscv_soc_top #( `ifdef VERILATOR assign clk = clk_50m_i; `else + // 使用xilinx vivado中的mmcm IP进行分频 + // 输入为50MHZ，输出为25MHZ mmcm_main_clk u_mmcm_main_clk( .clk_out1(clk), .resetn(rst_ext_ni), @@ -412,6 +431,8 @@ module tinyriscv_soc_top #( .slave_addr_i (slave_addr[JtagDevice]), .slave_be_i (slave_be[JtagDevice]), .slave_wdata_i (slave_wdata[JtagDevice]), + .slave_gnt_o (slave_gnt[JtagDevice]), + .slave_rvalid_o (slave_rvalid[JtagDevice]), .slave_rdata_o (slave_rdata[JtagDevice]) ); diff --git a/sim/sim_ctrl.sv b/sim/sim_ctrl.sv index c0e4b09..d249b97 100644 --- a/sim/sim_ctrl.sv +++ b/sim/sim_ctrl.sv @@ -30,6 +30,7 @@ module sim_ctrl( input logic we_i, input logic[3:0] be_i, input logic[31:0] wdata_i, + output logic rvalid_o, output logic[31:0] rdata_o ); @@ -43,8 +44,10 @@ module sim_ctrl( always_ff @ (posedge clk_i or negedge rst_ni) begin if (!rst_ni) begin dump_wave_en_o <= 1'b0; + rvalid_o <= 1'b0; end else begin - if (we_i) begin + rvalid_o <= req_i; + if (req_i & we_i) begin case (reg_addr) `REG_CTRL: begin if (be_i[0] & wdata_i[0]) begin