zcy
/
tinyriscv
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

rtl🔝 add more perips 

Signed-off-by: liangkangnan <liangkangnan@163.com>
pull/4/head
liangkangnan 2021-09-10 09:57:39 +08:00
parent 519ef32ae7
commit 22a038cc09
2 changed files with 283 additions and 122 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
rtl/core/defines.sv
View File

@ -33,19 +33,37 @@
`define RAM_ADDR_BASE 32'h20000000
// GPIO
`define GPIO_ADDR_MASK ~32'hffff
`define GPIO_ADDR_BASE 32'h30000000
`define GPIO_ADDR_BASE 32'h03000000
// Timer0
`define TIMER0_ADDR_MASK ~32'hffff
`define TIMER0_ADDR_BASE 32'h40000000
`define TIMER0_ADDR_BASE 32'h04000000
// UART0
`define UART0_ADDR_MASK ~32'hffff
`define UART0_ADDR_BASE 32'h50000000
`define UART0_ADDR_BASE 32'h05000000
// I2C0
`define I2C0_ADDR_MASK ~32'hffff
`define I2C0_ADDR_BASE 32'h60000000
`define I2C0_ADDR_BASE 32'h06000000
// SPI0
`define SPI0_ADDR_MASK ~32'hffff
`define SPI0_ADDR_BASE 32'h70000000
`define SPI0_ADDR_BASE 32'h07000000
// PINMUX
`define PINMUX_ADDR_MASK ~32'hffff
`define PINMUX_ADDR_BASE 32'h08000000
// UART1
`define UART1_ADDR_MASK ~32'hffff
`define UART1_ADDR_BASE 32'h09000000
// UART2
`define UART2_ADDR_MASK ~32'hffff
`define UART2_ADDR_BASE 32'h0A000000
// Timer1
`define TIMER1_ADDR_MASK ~32'hffff
`define TIMER1_ADDR_BASE 32'h0C000000
// Timer2
`define TIMER2_ADDR_MASK ~32'hffff
`define TIMER2_ADDR_BASE 32'h0D000000
// I2C1
`define I2C1_ADDR_MASK ~32'hffff
`define I2C1_ADDR_BASE 32'h0B000000
// Interrupt controller
`define RVIC_ADDR_MASK ~32'hffff
`define RVIC_ADDR_BASE 32'hD0000000

345
rtl/top/tinyriscv_soc_top.sv
View File

@ -20,28 +20,17 @@
// tinyriscv soc顶层模块
module tinyriscv_soc_top #(
parameter bit TRACE_ENABLE = 1'b0,
parameter int GPIO_NUM = 2
parameter int GPIO_NUM = 16,
parameter int I2C_NUM = 2,
parameter int UART_NUM = 3,
parameter int SPI_NUM = 1
)(
input wire clk_50m_i, // 时钟引脚
input wire rst_ext_ni, // 复位引脚，低电平有效
output wire halted_ind_pin, // jtag是否已经halt住CPU，高电平有效
output wire uart_tx_pin, // UART发送引脚
input wire uart_rx_pin, // UART接收引脚
inout wire i2c_scl_pin, // I2C SCL引脚
inout wire i2c_sda_pin, // I2C SDA引脚
inout wire spi_clk_pin, // SPI CLK引脚
inout wire spi_ss_pin, // SPI SS引脚
inout wire spi_dq0_pin, // SPI DQ0(MOSI)引脚
inout wire spi_dq1_pin, // SPI DQ1(MISO)引脚
inout wire spi_dq2_pin, // SPI DQ2引脚
inout wire spi_dq3_pin, // SPI DQ3引脚
inout wire[1:0] gpio_pins, // GPIO引脚，1bit代表一个GPIO
inout wire[GPIO_NUM-1:0] io_pins, // IO引脚，1bit代表一个IO
`ifdef VERILATOR
output wire dump_wave_en_o, // dump wave使能
@ -51,14 +40,13 @@ module tinyriscv_soc_top #(
input wire jtag_TMS_pin, // JTAG TMS引脚
input wire jtag_TDI_pin, // JTAG TDI引脚
output wire jtag_TDO_pin // JTAG TDO引脚
);
localparam int MASTERS = 3; // Number of master ports
`ifdef VERILATOR
localparam int SLAVES = 10; // Number of slave ports
localparam int SLAVES = 16; // Number of slave ports
`else
localparam int SLAVES = 9; // Number of slave ports
localparam int SLAVES = 15; // Number of slave ports
`endif
// masters
@ -76,11 +64,16 @@ module tinyriscv_soc_top #(
localparam int Rvic = 6;
localparam int I2c0 = 7;
localparam int Spi0 = 8;
localparam int Pinmux = 9;
localparam int Uart1 = 10;
localparam int Uart2 = 11;
localparam int I2c1 = 12;
localparam int Timer1 = 13;
localparam int Timer2 = 14;
`ifdef VERILATOR
localparam int SimCtrl = 9;
localparam int SimCtrl = 15;
`endif
wire master_req [MASTERS];
wire master_gnt [MASTERS];
wire master_rvalid [MASTERS];
@ -123,42 +116,52 @@ module tinyriscv_soc_top #(
wire[7:0] int_id;
wire timer0_irq;
wire timer1_irq;
wire timer2_irq;
wire uart0_irq;
wire uart1_irq;
wire uart2_irq;
wire gpio0_irq;
wire gpio1_irq;
wire i2c0_irq;
wire i2c1_irq;
wire spi0_irq;
wire gpio2_4_irq;
wire gpio5_7_irq;
wire gpio8_irq;
wire gpio9_irq;
wire gpio10_12_irq;
wire gpio13_15_irq;
wire[GPIO_NUM-1:0] gpio_data_in;
wire[GPIO_NUM-1:0] gpio_oe;
wire[GPIO_NUM-1:0] gpio_data_out;
wire i2c_scl_in;
wire i2c_scl_oe;
wire i2c_scl_out;
wire i2c_sda_in;
wire i2c_sda_oe;
wire i2c_sda_out;
wire[GPIO_NUM-1:0] io_data_in;
wire[GPIO_NUM-1:0] io_oe;
wire[GPIO_NUM-1:0] io_data_out;
wire spi_clk_in;
wire spi_clk_oe;
wire spi_clk_out;
wire spi_ss_in;
wire spi_ss_oe;
wire spi_ss_out;
wire spi_dq0_in;
wire spi_dq0_oe;
wire spi_dq0_out;
wire spi_dq1_in;
wire spi_dq1_oe;
wire spi_dq1_out;
wire spi_dq2_in;
wire spi_dq2_oe;
wire spi_dq2_out;
wire spi_dq3_in;
wire spi_dq3_oe;
wire spi_dq3_out;
wire[I2C_NUM-1:0] i2c_scl_in;
wire[I2C_NUM-1:0] i2c_scl_oe;
wire[I2C_NUM-1:0] i2c_scl_out;
wire[I2C_NUM-1:0] i2c_sda_in;
wire[I2C_NUM-1:0] i2c_sda_oe;
wire[I2C_NUM-1:0] i2c_sda_out;
wire[UART_NUM-1:0] uart_tx;
wire[UART_NUM-1:0] uart_rx;
wire[SPI_NUM-1:0] spi_clk_in;
wire[SPI_NUM-1:0] spi_clk_oe;
wire[SPI_NUM-1:0] spi_clk_out;
wire[SPI_NUM-1:0] spi_ss_in;
wire[SPI_NUM-1:0] spi_ss_oe;
wire[SPI_NUM-1:0] spi_ss_out;
wire[3:0] spi_dq_in[SPI_NUM-1:0];
wire[3:0] spi_dq_oe[SPI_NUM-1:0];
wire[3:0] spi_dq_out[SPI_NUM-1:0];
// 中断源
always @ (*) begin
irq_src = 32'h0;
irq_src[ 0] = timer0_irq;
@ -167,6 +170,17 @@ module tinyriscv_soc_top #(
irq_src[ 3] = gpio1_irq;
irq_src[ 4] = i2c0_irq;
irq_src[ 5] = spi0_irq;
irq_src[ 6] = gpio2_4_irq;
irq_src[ 7] = gpio5_7_irq;
irq_src[ 8] = gpio8_irq;
irq_src[ 9] = gpio9_irq;
irq_src[10] = gpio10_12_irq;
irq_src[11] = gpio13_15_irq;
irq_src[12] = uart1_irq;
irq_src[13] = uart2_irq;
irq_src[14] = i2c1_irq;
irq_src[15] = timer1_irq;
irq_src[16] = timer2_irq;
end
`ifdef VERILATOR
@ -261,14 +275,43 @@ module tinyriscv_soc_top #(
.data_o (slave_rdata[Timer0])
);
for (genvar i = 0; i < GPIO_NUM; i = i + 1) begin : g_gpio_data
assign gpio_pins[i] = gpio_oe[i] ? gpio_data_out[i] : 1'bz;
assign gpio_data_in[i] = gpio_pins[i];
end
assign slave_addr_mask[Timer1] = `TIMER1_ADDR_MASK;
assign slave_addr_base[Timer1] = `TIMER1_ADDR_BASE;
// 4.定时器1模块
timer_top timer1(
.clk_i (clk),
.rst_ni (ndmreset_n),
.irq_o (timer1_irq),
.req_i (slave_req[Timer1]),
.we_i (slave_we[Timer1]),
.be_i (slave_be[Timer1]),
.addr_i (slave_addr[Timer1]),
.data_i (slave_wdata[Timer1]),
.gnt_o (slave_gnt[Timer1]),
.rvalid_o(slave_rvalid[Timer1]),
.data_o (slave_rdata[Timer1])
);
assign slave_addr_mask[Timer2] = `TIMER2_ADDR_MASK;
assign slave_addr_base[Timer2] = `TIMER2_ADDR_BASE;
// 5.定时器2模块
timer_top timer2(
.clk_i (clk),
.rst_ni (ndmreset_n),
.irq_o (timer2_irq),
.req_i (slave_req[Timer2]),
.we_i (slave_we[Timer2]),
.be_i (slave_be[Timer2]),
.addr_i (slave_addr[Timer2]),
.data_i (slave_wdata[Timer2]),
.gnt_o (slave_gnt[Timer2]),
.rvalid_o(slave_rvalid[Timer2]),
.data_o (slave_rdata[Timer2])
);
assign slave_addr_mask[Gpio] = `GPIO_ADDR_MASK;
assign slave_addr_base[Gpio] = `GPIO_ADDR_BASE;
// 4.GPIO模块
// 6.GPIO模块
gpio_top #(
.GPIO_NUM(GPIO_NUM)
) u_gpio (
@ -279,8 +322,12 @@ module tinyriscv_soc_top #(
.gpio_data_i (gpio_data_in),
.irq_gpio0_o (gpio0_irq),
.irq_gpio1_o (gpio1_irq),
.irq_gpio2_4_o (),
.irq_gpio5_7_o (),
.irq_gpio2_4_o (gpio2_4_irq),
.irq_gpio5_7_o (gpio5_7_irq),
.irq_gpio8_o (gpio8_irq),
.irq_gpio9_o (gpio9_irq),
.irq_gpio10_12_o(gpio10_12_irq),
.irq_gpio13_15_o(gpio13_15_irq),
.req_i (slave_req[Gpio]),
.we_i (slave_we[Gpio]),
.be_i (slave_be[Gpio]),
@ -293,12 +340,12 @@ module tinyriscv_soc_top #(
assign slave_addr_mask[Uart0] = `UART0_ADDR_MASK;
assign slave_addr_base[Uart0] = `UART0_ADDR_BASE;
// 5.串口0模块
// 7.串口0模块
uart_top uart0 (
.clk_i (clk),
.rst_ni (ndmreset_n),
.rx_i (uart_rx_pin),
.tx_o (uart_tx_pin),
.rx_i (uart_rx[0]),
.tx_o (uart_tx[0]),
.irq_o (uart0_irq),
.req_i (slave_req[Uart0]),
.we_i (slave_we[Uart0]),
@ -310,9 +357,47 @@ module tinyriscv_soc_top #(
.data_o (slave_rdata[Uart0])
);
assign slave_addr_mask[Uart1] = `UART1_ADDR_MASK;
assign slave_addr_base[Uart1] = `UART1_ADDR_BASE;
// 8.串口1模块
uart_top uart1 (
.clk_i (clk),
.rst_ni (ndmreset_n),
.rx_i (uart_rx[1]),
.tx_o (uart_tx[1]),
.irq_o (uart1_irq),
.req_i (slave_req[Uart1]),
.we_i (slave_we[Uart1]),
.be_i (slave_be[Uart1]),
.addr_i (slave_addr[Uart1]),
.data_i (slave_wdata[Uart1]),
.gnt_o (slave_gnt[Uart1]),
.rvalid_o (slave_rvalid[Uart1]),
.data_o (slave_rdata[Uart1])
);
assign slave_addr_mask[Uart2] = `UART2_ADDR_MASK;
assign slave_addr_base[Uart2] = `UART2_ADDR_BASE;
// 9.串口2模块
uart_top uart2 (
.clk_i (clk),
.rst_ni (ndmreset_n),
.rx_i (uart_rx[2]),
.tx_o (uart_tx[2]),
.irq_o (uart2_irq),
.req_i (slave_req[Uart2]),
.we_i (slave_we[Uart2]),
.be_i (slave_be[Uart2]),
.addr_i (slave_addr[Uart2]),
.data_i (slave_wdata[Uart2]),
.gnt_o (slave_gnt[Uart2]),
.rvalid_o (slave_rvalid[Uart2]),
.data_o (slave_rdata[Uart2])
);
assign slave_addr_mask[Rvic] = `RVIC_ADDR_MASK;
assign slave_addr_base[Rvic] = `RVIC_ADDR_BASE;
// 6.中断控制器模块
// 10.中断控制器模块
rvic_top u_rvic(
.clk_i (clk),
.rst_ni (ndmreset_n),
@ -329,23 +414,18 @@ module tinyriscv_soc_top #(
.data_o (slave_rdata[Rvic])
);
assign i2c_scl_pin = i2c_scl_oe ? i2c_scl_out : 1'bz;
assign i2c_scl_in = i2c_scl_pin;
assign i2c_sda_pin = i2c_sda_oe ? i2c_sda_out : 1'bz;
assign i2c_sda_in = i2c_sda_pin;
assign slave_addr_mask[I2c0] = `I2C0_ADDR_MASK;
assign slave_addr_base[I2c0] = `I2C0_ADDR_BASE;
// 7.I2C0模块
// 11.I2C0模块
i2c_top i2c0(
.clk_i (clk),
.rst_ni (ndmreset_n),
.scl_o (i2c_scl_out),
.scl_oe_o (i2c_scl_oe),
.scl_i (i2c_scl_in),
.sda_o (i2c_sda_out),
.sda_oe_o (i2c_sda_oe),
.sda_i (i2c_sda_in),
.scl_o (i2c_scl_out[0]),
.scl_oe_o (i2c_scl_oe[0]),
.scl_i (i2c_scl_in[0]),
.sda_o (i2c_sda_out[0]),
.sda_oe_o (i2c_sda_oe[0]),
.sda_i (i2c_sda_in[0]),
.irq_o (i2c0_irq),
.req_i (slave_req[I2c0]),
.we_i (slave_we[I2c0]),
@ -357,43 +437,53 @@ module tinyriscv_soc_top #(
.data_o (slave_rdata[I2c0])
);
assign spi_clk_pin = spi_clk_oe ? spi_clk_out : 1'bz;
assign spi_clk_in = spi_clk_pin;
assign spi_ss_pin = spi_ss_oe ? spi_ss_out : 1'bz;
assign spi_ss_in = spi_ss_pin;
assign spi_dq0_pin = spi_dq0_oe ? spi_dq0_out : 1'bz;
assign spi_dq0_in = spi_dq0_pin;
assign spi_dq1_pin = spi_dq1_oe ? spi_dq1_out : 1'bz;
assign spi_dq1_in = spi_dq1_pin;
assign spi_dq2_pin = spi_dq2_oe ? spi_dq2_out : 1'bz;
assign spi_dq2_in = spi_dq2_pin;
assign spi_dq3_pin = spi_dq3_oe ? spi_dq3_out : 1'bz;
assign spi_dq3_in = spi_dq3_pin;
assign slave_addr_mask[I2c1] = `I2C1_ADDR_MASK;
assign slave_addr_base[I2c1] = `I2C1_ADDR_BASE;
// 12.I2C0模块
i2c_top i2c1(
.clk_i (clk),
.rst_ni (ndmreset_n),
.scl_o (i2c_scl_out[1]),
.scl_oe_o (i2c_scl_oe[1]),
.scl_i (i2c_scl_in[1]),
.sda_o (i2c_sda_out[1]),
.sda_oe_o (i2c_sda_oe[1]),
.sda_i (i2c_sda_in[1]),
.irq_o (i2c1_irq),
.req_i (slave_req[I2c1]),
.we_i (slave_we[I2c1]),
.be_i (slave_be[I2c1]),
.addr_i (slave_addr[I2c1]),
.data_i (slave_wdata[I2c1]),
.gnt_o (slave_gnt[I2c1]),
.rvalid_o (slave_rvalid[I2c1]),
.data_o (slave_rdata[I2c1])
);
assign slave_addr_mask[Spi0] = `SPI0_ADDR_MASK;
assign slave_addr_base[Spi0] = `SPI0_ADDR_BASE;
// 8.SPI0模块
// 13.SPI0模块
spi_top spi0(
.clk_i (clk),
.rst_ni (ndmreset_n),
.spi_clk_i (spi_clk_in),
.spi_clk_o (spi_clk_out),
.spi_clk_oe_o(spi_clk_oe),
.spi_ss_i (spi_ss_in),
.spi_ss_o (spi_ss_out),
.spi_ss_oe_o(spi_ss_oe),
.spi_dq0_i (spi_dq0_in),
.spi_dq0_o (spi_dq0_out),
.spi_dq0_oe_o(spi_dq0_oe),
.spi_dq1_i (spi_dq1_in),
.spi_dq1_o (spi_dq1_out),
.spi_dq1_oe_o(spi_dq1_oe),
.spi_dq2_i (spi_dq2_in),
.spi_dq2_o (spi_dq2_out),
.spi_dq2_oe_o(spi_dq2_oe),
.spi_dq3_i (spi_dq3_in),
.spi_dq3_o (spi_dq3_out),
.spi_dq3_oe_o(spi_dq3_oe),
.spi_clk_i (spi_clk_in[0]),
.spi_clk_o (spi_clk_out[0]),
.spi_clk_oe_o(spi_clk_oe[0]),
.spi_ss_i (spi_ss_in[0]),
.spi_ss_o (spi_ss_out[0]),
.spi_ss_oe_o(spi_ss_oe[0]),
.spi_dq0_i (spi_dq_in[0][0]),
.spi_dq0_o (spi_dq_out[0][0]),
.spi_dq0_oe_o(spi_dq_oe[0][0]),
.spi_dq1_i (spi_dq_in[0][1]),
.spi_dq1_o (spi_dq_out[0][1]),
.spi_dq1_oe_o(spi_dq_oe[0][1]),
.spi_dq2_i (spi_dq_in[0][2]),
.spi_dq2_o (spi_dq_out[0][2]),
.spi_dq2_oe_o(spi_dq_oe[0][2]),
.spi_dq3_i (spi_dq_in[0][3]),
.spi_dq3_o (spi_dq_out[0][3]),
.spi_dq3_oe_o(spi_dq_oe[0][3]),
.irq_o (spi0_irq),
.req_i (slave_req[Spi0]),
.we_i (slave_we[Spi0]),
@ -405,10 +495,63 @@ module tinyriscv_soc_top #(
.data_o (slave_rdata[Spi0])
);
for (genvar i = 0; i < GPIO_NUM; i = i + 1) begin : g_io_data
assign io_pins[i] = io_oe[i] ? io_data_out[i] : 1'bz;
assign io_data_in[i] = io_pins[i];
end
assign slave_addr_mask[Pinmux] = `PINMUX_ADDR_MASK;
assign slave_addr_base[Pinmux] = `PINMUX_ADDR_BASE;
// 14.PINMUX模块
pinmux_top #(
.GPIO_NUM(GPIO_NUM),
.I2C_NUM(I2C_NUM),
.UART_NUM(UART_NUM),
.SPI_NUM(SPI_NUM)
) u_pinmux (
.clk_i (clk),
.rst_ni (ndmreset_n),
.gpio_oe_i (gpio_oe),
.gpio_val_i (gpio_data_out),
.gpio_val_o (gpio_data_in),
.i2c_sda_oe_i (i2c_sda_oe),
.i2c_sda_val_i (i2c_sda_out),
.i2c_sda_val_o (i2c_sda_in),
.i2c_scl_oe_i (i2c_scl_oe),
.i2c_scl_val_i (i2c_scl_out),
.i2c_scl_val_o (i2c_scl_in),
.uart_tx_oe_i ({UART_NUM{1'b1}}),
.uart_tx_val_i (uart_tx),
.uart_tx_val_o (),
.uart_rx_oe_i ({UART_NUM{1'b0}}),
.uart_rx_val_i (),
.uart_rx_val_o (uart_rx),
.spi_clk_oe_i (spi_clk_oe),
.spi_clk_val_i (spi_clk_out),
.spi_clk_val_o (spi_clk_in),
.spi_ss_oe_i (spi_ss_oe),
.spi_ss_val_i (spi_ss_out),
.spi_ss_val_o (spi_ss_in),
.spi_dq_oe_i (spi_dq_oe),
.spi_dq_val_i (spi_dq_out),
.spi_dq_val_o (spi_dq_in),
.io_val_i (io_data_in),
.io_val_o (io_data_out),
.io_oe_o (io_oe),
.req_i (slave_req[Pinmux]),
.we_i (slave_we[Pinmux]),
.be_i (slave_be[Pinmux]),
.addr_i (slave_addr[Pinmux]),
.data_i (slave_wdata[Pinmux]),
.gnt_o (slave_gnt[Pinmux]),
.rvalid_o (slave_rvalid[Pinmux]),
.data_o (slave_rdata[Pinmux])
);
`ifdef VERILATOR
assign slave_addr_mask[SimCtrl] = `SIM_CTRL_ADDR_MASK;
assign slave_addr_base[SimCtrl] = `SIM_CTRL_ADDR_BASE;
// 9.仿真控制模块
// 15.仿真控制模块
sim_ctrl u_sim_ctrl(
.clk_i (clk),
.rst_ni (ndmreset_n),
@ -475,7 +618,7 @@ module tinyriscv_soc_top #(
// JTAG module
jtag_top #(
) u_jtag_top (
) u_jtag (
.clk_i (clk),
.rst_ni (rst_ext_ni),
.debug_req_o (debug_req),