tinyriscv/rtl/top/tinyriscv_soc_top.sv

 /*                                                                      
 Copyright 2020 Blue Liang, liangkangnan@163.com
                                                                         
 Licensed under the Apache License, Version 2.0 (the "License");         
 you may not use this file except in compliance with the License.        
 You may obtain a copy of the License at                                 
                                                                         
     http://www.apache.org/licenses/LICENSE-2.0                          
                                                                         
 Unless required by applicable law or agreed to in writing, software    
 distributed under the License is distributed on an "AS IS" BASIS,       
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and     
 limitations under the License.                                          
 */

`include "../core/defines.sv"
`include "../debug/jtag_def.sv"

// tinyriscv soc顶层模块
module tinyriscv_soc_top(

    input wire clk,                 // 时钟引脚
    input wire rst_ext_ni,          // 复位引脚，低电平有效

    output wire halted_ind_pin,     // jtag是否已经halt住CPU，高电平有效

    output wire uart_tx_pin,        // UART发送引脚
    input wire uart_rx_pin,         // UART接收引脚

    inout wire[1:0] gpio_pins,      // GPIO引脚，1bit代表一个GPIO

    input wire jtag_TCK_pin,        // JTAG TCK引脚
    input wire jtag_TMS_pin,        // JTAG TMS引脚
    input wire jtag_TDI_pin,        // JTAG TDI引脚
    output wire jtag_TDO_pin        // JTAG TDO引脚

    );

    localparam int MASTERS      = 3; // Number of master ports
    localparam int SLAVES       = 3; // Number of slave ports

    // masters
    localparam int CoreD        = 0;
    localparam int JtagHost     = 1;
    localparam int CoreI        = 2;

    // slaves
    localparam int Rom          = 0;
    localparam int Ram          = 1;
    localparam int JtagDevice   = 2;


    wire           master_req       [MASTERS];
    wire           master_gnt       [MASTERS];
    wire           master_rvalid    [MASTERS];
    wire [31:0]    master_addr      [MASTERS];
    wire           master_we        [MASTERS];
    wire [ 3:0]    master_be        [MASTERS];
    wire [31:0]    master_rdata     [MASTERS];
    wire [31:0]    master_wdata     [MASTERS];

    wire           slave_req        [SLAVES];
    wire           slave_gnt        [SLAVES];
    wire           slave_rvalid     [SLAVES];
    wire [31:0]    slave_addr       [SLAVES];
    wire           slave_we         [SLAVES];
    wire [ 3:0]    slave_be         [SLAVES];
    wire [31:0]    slave_rdata      [SLAVES];
    wire [31:0]    slave_wdata      [SLAVES];

    wire [31:0]    slave_addr_mask  [SLAVES];
    wire [31:0]    slave_addr_base  [SLAVES];

`ifdef VERILATOR
    wire          sim_jtag_tck;
    wire          sim_jtag_tms;
    wire          sim_jtag_tdi;
    wire          sim_jtag_trstn;
    wire          sim_jtag_tdo;
    wire [31:0]   sim_jtag_exit;
`endif

    wire ndmreset;
    wire ndmreset_n;
    wire debug_req;
    wire core_halted;

    assign halted_ind_pin = core_halted;

    tinyriscv_core #(
        .DEBUG_HALT_ADDR(`DEBUG_ADDR_BASE + `HaltAddress),
        .DEBUG_EXCEPTION_ADDR(`DEBUG_ADDR_BASE + `ExceptionAddress)
    ) u_tinyriscv_core (
        .clk            (clk),
        .rst_n          (ndmreset_n),

        .instr_req_o    (master_req[CoreI]),
        .instr_gnt_i    (master_gnt[CoreI]),
        .instr_rvalid_i (master_rvalid[CoreI]),
        .instr_addr_o   (master_addr[CoreI]),
        .instr_rdata_i  (master_rdata[CoreI]),
        .instr_err_i    (1'b0),

        .data_req_o     (master_req[CoreD]),
        .data_gnt_i     (master_gnt[CoreD]),
        .data_rvalid_i  (master_rvalid[CoreD]),
        .data_we_o      (master_we[CoreD]),
        .data_be_o      (master_be[CoreD]),
        .data_addr_o    (master_addr[CoreD]),
        .data_wdata_o   (master_wdata[CoreD]),
        .data_rdata_i   (master_rdata[CoreD]),
        .data_err_i     (1'b0),

        .irq_software_i (1'b0),
        .irq_timer_i    (1'b0),
        .irq_external_i (1'b0),
        .irq_fast_i     (15'b0),

        .debug_req_i    (debug_req)
    );

    assign slave_addr_mask[Rom] = `ROM_ADDR_MASK;
    assign slave_addr_base[Rom] = `ROM_ADDR_BASE;
    // 指令存储器
    rom #(
        .DP(`ROM_DEPTH)
    ) u_rom (
        .clk    (clk),
        .rst_n  (ndmreset_n),
        .addr_i (slave_addr[Rom]),
        .data_i (slave_wdata[Rom]),
        .sel_i  (slave_be[Rom]),
        .we_i   (slave_we[Rom]),
        .data_o (slave_rdata[Rom])
    );

    assign slave_addr_mask[Ram] = `RAM_ADDR_MASK;
    assign slave_addr_base[Ram] = `RAM_ADDR_BASE;
    // 数据存储器
    ram #(
        .DP(`RAM_DEPTH)
    ) u_ram (
        .clk    (clk),
        .rst_n  (ndmreset_n),
        .addr_i (slave_addr[Ram]),
        .data_i (slave_wdata[Ram]),
        .sel_i  (slave_be[Ram]),
        .we_i   (slave_we[Ram]),
        .data_o (slave_rdata[Ram])
    );

    obi_interconnect #(
        .MASTERS(MASTERS),
        .SLAVES(SLAVES)
    ) bus (
        .clk_i              (clk),
        .rst_ni             (ndmreset_n),
        .master_req_i       (master_req),
        .master_gnt_o       (master_gnt),
        .master_rvalid_o    (master_rvalid),
        .master_we_i        (master_we),
        .master_be_i        (master_be),
        .master_addr_i      (master_addr),
        .master_wdata_i     (master_wdata),
        .master_rdata_o     (master_rdata),
        .slave_addr_mask_i  (slave_addr_mask),
        .slave_addr_base_i  (slave_addr_base),
        .slave_req_o        (slave_req),
        .slave_gnt_i        (slave_gnt),
        .slave_rvalid_i     (slave_rvalid),
        .slave_we_o         (slave_we),
        .slave_be_o         (slave_be),
        .slave_addr_o       (slave_addr),
        .slave_wdata_o      (slave_wdata),
        .slave_rdata_i      (slave_rdata)
    );

    rst_gen #(
        .RESET_FIFO_DEPTH(5)
    ) u_rst (
        .clk    (clk),
        .rst_ni (rst_ext_ni & (~ndmreset)),
        .rst_no (ndmreset_n)
    );

    assign slave_addr_mask[JtagDevice] = `DEBUG_ADDR_MASK;
    assign slave_addr_base[JtagDevice] = `DEBUG_ADDR_BASE;
    // JTAG module
    jtag_top #(

    ) u_jtag_top (
        .clk_i              (clk),
        .rst_ni             (rst_ext_ni),
        .debug_req_o        (debug_req),
        .ndmreset_o         (ndmreset),
        .halted_o           (core_halted),
        .jtag_tck_i         (sim_jtag_tck),
        .jtag_tdi_i         (sim_jtag_tdi),
        .jtag_tms_i         (sim_jtag_tms),
        .jtag_trst_ni       (sim_jtag_trstn),
        .jtag_tdo_o         (sim_jtag_tdo),
        .master_req_o       (master_req[JtagHost]),
        .master_gnt_i       (master_gnt[JtagHost]),
        .master_rvalid_i    (master_rvalid[JtagHost]),
        .master_we_o        (master_we[JtagHost]),
        .master_be_o        (master_be[JtagHost]),
        .master_addr_o      (master_addr[JtagHost]),
        .master_wdata_o     (master_wdata[JtagHost]),
        .master_rdata_i     (master_rdata[JtagHost]),
        .master_err_i       (1'b0),
        .slave_req_i        (slave_req[JtagDevice]),
        .slave_we_i         (slave_we[JtagDevice]),
        .slave_addr_i       (slave_addr[JtagDevice]),
        .slave_be_i         (slave_be[JtagDevice]),
        .slave_wdata_i      (slave_wdata[JtagDevice]),
        .slave_rdata_o      (slave_rdata[JtagDevice])
    );

`ifdef VERILATOR
    sim_jtag #(
        .TICK_DELAY(1),
        .PORT(9999)
    ) u_sim_jtag (
        .clock                ( clk                  ),
        .reset                ( ~rst_ext_ni          ),
        .enable               ( 1'b1                 ),
        .init_done            ( rst_ext_ni           ),
        .jtag_TCK             ( sim_jtag_tck         ),
        .jtag_TMS             ( sim_jtag_tms         ),
        .jtag_TDI             ( sim_jtag_tdi         ),
        .jtag_TRSTn           ( sim_jtag_trstn       ),
        .jtag_TDO_data        ( sim_jtag_tdo         ),
        .jtag_TDO_driven      ( 1'b1                 ),
        .exit                 ( sim_jtag_exit        )
    );

    always @ (*) begin
        if (sim_jtag_exit) begin
            $display("jtag exit...");
            $finish(2);
        end
    end
`endif

endmodule