tinyriscv/sim/tb_top_verilator.sv

// Copyright 2018 Robert Balas <balasr@student.ethz.ch>
// Copyright and related rights are licensed under the Solderpad Hardware
// License, Version 0.51 (the "License"); you may not use this file except in
// compliance with the License.  You may obtain a copy of the License at
// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
// or agreed to in writing, software, hardware and materials distributed under
// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.

// Top level wrapper for a verilator RI5CY testbench
// Contributor: Robert Balas <balasr@student.ethz.ch>


module tb_top_verilator #(

    ) (
       input   clk_i,
       input   rst_ni
    );

    wire[31:0] x26 = u_tinyriscv_soc_top.u_tinyriscv_core.u_gpr_reg.regs[26];
    wire[31:0] x27 = u_tinyriscv_soc_top.u_tinyriscv_core.u_gpr_reg.regs[27];

    initial begin: load_prog
        automatic logic [1023:0] firmware;

        if($value$plusargs("firmware=%s", firmware)) begin
            //if($test$plusargs("verbose"))
                $display("[TESTBENCH] %t: loading firmware %0s ...",
                         $time, firmware);
            $readmemh (firmware, u_tinyriscv_soc_top.u_rom.u_gen_ram.ram);
        end else begin
            $display("No firmware specified");
        end
    end
/*
    always @(posedge clk_i or negedge rst_ni) begin
        if (!rst_ni) begin

        end else begin
            if (x26 == 32'b1) begin
                if (x27 == 32'b1) begin
                    $display("~~~~~~~~~~~~~~~~~~~ TEST_PASS ~~~~~~~~~~~~~~~~~~~");
                    $display("~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~");
                    $display("~~~~~~~~~ #####     ##     ####    #### ~~~~~~~~~");
                    $display("~~~~~~~~~ #    #   #  #   #       #     ~~~~~~~~~");
                    $display("~~~~~~~~~ #    #  #    #   ####    #### ~~~~~~~~~");
                    $display("~~~~~~~~~ #####   ######       #       #~~~~~~~~~");
                    $display("~~~~~~~~~ #       #    #  #    #  #    #~~~~~~~~~");
                    $display("~~~~~~~~~ #       #    #   ####    #### ~~~~~~~~~");
                    $display("~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~");
                end else begin
                    $display("~~~~~~~~~~~~~~~~~~~ TEST_FAIL ~~~~~~~~~~~~~~~~~~~~");
                    $display("~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~");
                    $display("~~~~~~~~~~######    ##       #    #     ~~~~~~~~~~");
                    $display("~~~~~~~~~~#        #  #      #    #     ~~~~~~~~~~");
                    $display("~~~~~~~~~~#####   #    #     #    #     ~~~~~~~~~~");
                    $display("~~~~~~~~~~#       ######     #    #     ~~~~~~~~~~");
                    $display("~~~~~~~~~~#       #    #     #    #     ~~~~~~~~~~");
                    $display("~~~~~~~~~~#       #    #     #    ######~~~~~~~~~~");
                    $display("~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~");
                end
                $finish;
            end
        end
    end
*/
    tinyriscv_soc_top u_tinyriscv_soc_top(
        .clk(clk_i),
        .rst_ext_ni(rst_ni)
    );

endmodule // tb_top_verilator