Paul Fertser 698eaf9896 interface/ftdi: add TUMPA Lite config ... TUMPA Lite is a cheap FT232H-based breakout board, without any buffering. It also lacks series resistors so for some targets (especially when not using ridiculously short wires) one needs to add about 47 Ohms in series on every high-speed line. The SRST line is connected directly to the FT232H too. Real-life tested (including SRST and TRST). Change-Id: I5ed4f88d8d20384e9c52efe2ff0c290e2650d43e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1918 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>		2014-02-04 20:52:26 +00:00
..
libdcc	update files to correct FSF address	2013-06-05 19:52:42 +00:00
loaders	cortex_m: target implementation renames cortex_m3 to cortex_m	2013-10-10 20:51:03 +00:00
coresight-trace.txt	present CM3 Trace agenda	2011-01-09 21:14:57 +01:00
cross-build.sh	cmsis-dap: add initial cmsis-dap support	2014-01-09 15:20:51 +00:00
gen-stellaris-part-header.pl	flash: update luminary device table	2011-11-08 21:52:17 +00:00
itmdump.c	present CM3 Trace agenda	2011-01-09 21:14:57 +01:00
openocd.udev	interface/ftdi: add TUMPA Lite config	2014-02-04 20:52:26 +00:00