Marc Schink 888d5a5ec9 interface/jlink: Fix comment about serial number ... Leading zeros for the serial number are not necessary anymore. Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Change-Id: Ie4ff47b9cda7ccf314c6fda9a2784947db5ee4d9 Reviewed-on: http://openocd.zylin.com/3401 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>		2016-04-12 17:03:02 +01:00
..
ftdi	add Digilent HS2 support	2016-02-13 23:23:34 +00:00
altera-usb-blaster.cfg	jtag_interface: .speed can be NULL when not needed	2013-02-08 22:33:19 +00:00
altera-usb-blaster2.cfg	jtag/drivers: add USB-Blaster II	2014-01-20 13:28:02 +00:00
arm-jtag-ew.cfg	…
at91rm9200.cfg	…
axm0432.cfg	…
busblaster.cfg	…
buspirate.cfg	…
calao-usb-a9260-c01.cfg	…
calao-usb-a9260-c02.cfg	…
calao-usb-a9260.cfg	…
chameleon.cfg	…
cmsis-dap.cfg	cmsis-dap: add serial number support	2014-10-16 12:30:50 +00:00
cortino.cfg	…
digilent-hs1.cfg	…
dlp-usb1232h.cfg	…
dummy.cfg	…
estick.cfg	…
flashlink.cfg	…
flossjtag-noeeprom.cfg	…
flossjtag.cfg	…
flyswatter.cfg	…
flyswatter2.cfg	…
hilscher_nxhx10_etm.cfg	…
hilscher_nxhx50_etm.cfg	…
hilscher_nxhx50_re.cfg	…
hilscher_nxhx500_etm.cfg	…
hilscher_nxhx500_re.cfg	…
hitex_str9-comstick.cfg	…
icebear.cfg	…
jlink.cfg	interface/jlink: Fix comment about serial number	2016-04-12 17:03:02 +01:00
jtag-lock-pick_tiny_2.cfg	…
jtag_vpi.cfg	jtag_vpi: make the server address configurable	2013-12-31 12:00:49 +00:00
jtagkey-tiny.cfg	…
jtagkey.cfg	…
jtagkey2.cfg	…
jtagkey2p.cfg	…
kt-link.cfg	…
lisa-l.cfg	…
luminary-icdi.cfg	…
luminary-lm3s811.cfg	…
luminary.cfg	…
minimodule.cfg	…
nds32-aice.cfg	aice: add Andes AICE support	2013-06-05 19:27:23 +00:00
neodb.cfg	…
ngxtech.cfg	…
olimex-arm-usb-ocd-h.cfg	…
olimex-arm-usb-ocd.cfg	…
olimex-arm-usb-tiny-h.cfg	…
olimex-jtag-tiny.cfg	…
oocdlink.cfg	…
opendous.cfg	…
opendous_ftdi.cfg	interface: opendous_ftdi config file added	2013-03-13 12:32:56 +00:00
openjtag.cfg	Added OpenJTAG Driver	2013-06-05 19:52:15 +00:00
openocd-usb-hs.cfg	…
openocd-usb.cfg	…
openrd.cfg	…
osbdm.cfg	jtag_interface: .speed can be NULL when not needed	2013-02-08 22:33:19 +00:00
parport.cfg	tcl/interface/parport: default to sane value on non-windows systems	2015-04-14 11:42:32 +01:00
parport_dlc5.cfg	…
raspberrypi-native.cfg	bcm2835gpio: Add SWD support, Raspberry Pi 2 support.	2015-08-06 13:16:02 +01:00
raspberrypi2-native.cfg	bcm2835gpio: Add SWD support, Raspberry Pi 2 support.	2015-08-06 13:16:02 +01:00
redbee-econotag.cfg	…
redbee-usb.cfg	…
rlink.cfg	…
sheevaplug.cfg	…
signalyzer-h2.cfg	…
signalyzer-h4.cfg	…
signalyzer-lite.cfg	…
signalyzer.cfg	…
stlink-v1.cfg	jtag_interface: .speed can be NULL when not needed	2013-02-08 22:33:19 +00:00
stlink-v2-1.cfg	Support hla_serial command for ST-LINK adapters.	2014-09-22 19:36:05 +00:00
stlink-v2.cfg	Support hla_serial command for ST-LINK adapters.	2014-09-22 19:36:05 +00:00
stm32-stick.cfg	…
sysfsgpio-raspberrypi.cfg	jtag_interface: .speed can be NULL when not needed	2013-02-08 22:33:19 +00:00
ti-icdi.cfg	jtag_interface: .speed can be NULL when not needed	2013-02-08 22:33:19 +00:00
turtelizer2.cfg	turtelizer2-revC: Tested with real hardware.	2015-04-14 12:07:22 +01:00
ulink.cfg	…
usb-jtag.cfg	tcl: Setting lowlevel driver for ixo-usb-jtag	2015-10-21 09:10:56 +01:00
usbprog.cfg	…
vpaclink.cfg	…
vsllink.cfg	…
xds100v2.cfg	…