63 lines
1.7 KiB
INI
63 lines
1.7 KiB
INI
#Script for AT91EB40a
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME at91eb40a
|
|
}
|
|
|
|
if { [info exists ENDIAN] } {
|
|
set _ENDIAN $ENDIAN
|
|
} else {
|
|
set _ENDIAN little
|
|
}
|
|
|
|
if { [info exists CPUTAPID ] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
# force an error till we get a good number
|
|
set _CPUTAPID 0x1f0f0f0f
|
|
}
|
|
|
|
|
|
#Atmel ties SRST & TRST together, at which point it makes
|
|
#no sense to use TRST, but use TMS instead.
|
|
#
|
|
#The annoying thing with tying SRST & TRST together is that
|
|
#there is no way to halt the CPU *before and during* the
|
|
#SRST reset, which means that the CPU will run a number
|
|
#of cycles before it can be halted(as much as milliseconds).
|
|
reset_config srst_only srst_pulls_trst
|
|
|
|
#jtag scan chain
|
|
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
|
|
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
|
|
|
#target configuration
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
|
|
|
|
# speed up memory downloads
|
|
arm7_9 fast_memory_access enable
|
|
arm7_9 dcc_downloads enable
|
|
|
|
#flash driver
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
|
|
|
|
# required for usable performance. Used for lots of
|
|
# other things than flash programming.
|
|
$_TARGETNAME configure -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
|
|
|
|
$_TARGETNAME configure -event reset-init {
|
|
puts "Running reset init script for AT91EB40A"
|
|
# Reset script for AT91EB40a
|
|
reg cpsr 0x000000D3
|
|
mww 0xFFE00020 0x1
|
|
mww 0xFFE00024 0x00000000
|
|
mww 0xFFE00000 0x01002539
|
|
mww 0xFFFFF124 0xFFFFFFFF
|
|
mww 0xffff0010 0x100
|
|
mww 0xffff0034 0x100
|
|
}
|