tinyriscv-openocd/tcl/target/psoc5lp.cfg

66 lines
1.6 KiB
INI

#
# Cypress PSoC 5LP
#
source [find target/swj-dp.tcl]
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME psoc5lp
}
if { [info exists CPUTAPID] } {
set _CPU_TAPID $CPUTAPID
} else {
set _CPU_TAPID 0x4BA00477
}
if { [using_jtag] } {
set _CPU_DAP_ID $_CPU_TAPID
} else {
set _CPU_DAP_ID 0x2ba01477
}
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPU_DAP_ID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x2000
}
$_TARGETNAME configure -work-area-phys [expr 0x20000000 - $_WORKAREASIZE / 2] \
-work-area-size $_WORKAREASIZE -work-area-backup 0
source [find mem_helper.tcl]
$_TARGETNAME configure -event reset-init {
# Configure Target Device (PSoC 5LP Device Programming Specification 5.2)
set PANTHER_DBG_CFG 0x4008000C
set PANTHER_DBG_CFG_BYPASS [expr 1 << 1]
mmw $PANTHER_DBG_CFG $PANTHER_DBG_CFG_BYPASS 0
set PM_ACT_CFG0 0x400043A0
mww $PM_ACT_CFG0 0xBF
set FASTCLK_IMO_CR 0x40004200
set FASTCLK_IMO_CR_F_RANGE_2 [expr 2 << 0]
set FASTCLK_IMO_CR_F_RANGE_MASK [expr 7 << 0]
mmw $FASTCLK_IMO_CR $FASTCLK_IMO_CR_F_RANGE_2 $FASTCLK_IMO_CR_F_RANGE_MASK
}
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME psoc5lp 0x00000000 0 0 0 $_TARGETNAME
flash bank $_CHIPNAME.eeprom psoc5lp_eeprom 0x40008000 0 0 0 $_TARGETNAME
flash bank $_CHIPNAME.nvl psoc5lp_nvl 0 0 0 0 $_TARGETNAME
if {![using_hla]} {
cortex_m reset_config sysresetreq
}