tinyriscv-openocd/tcl/target/adsp-sc58x.cfg

54 lines
1.4 KiB
INI

#
# Analog Devices ADSP-SC58x (ARM Cortex-A5 plus one or two SHARC+ DSPs)
#
# Evaluation boards by Analog Devices (and designs derived from them) use a
# non-standard 10-pin 0.05" ARM Cortex Debug Connector. In this bastardized
# implementation, pin 9 (GND or GNDDetect) has been usurped with JTAG /TRST.
#
# As a result, a standards-compliant debug pod will force /TRST active,
# putting the processor's debug interface into reset and preventing usage.
#
# A connector adapter must be employed on these boards to isolate or remap
# /TRST so that it is only asserted when intended.
source [find target/swj-dp.tcl]
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME ADSP-SC58x
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x3BA02477
}
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
target create ap0.mem mem_ap -dap $_CHIPNAME.dap -ap-num 0
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_a -endian $_ENDIAN -dap $_CHIPNAME.dap
$_TARGETNAME configure -event examine-end {
global _TARGETNAME
sc58x_enabledebug
}
proc sc58x_enabledebug {} {
# Enable debugging functionality by setting bits in the TAPC_DBGCTL register
# it is not possible to halt the target unless these bits have been set
ap0.mem mww 0x31131000 0xFFFF
}