zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinyriscv-openocd/src/target/x86_32_common.c

1546 lines
46 KiB
C
Raw Blame History

/*
* Copyright(c) 2013 Intel Corporation.
*
* Adrian Burns (adrian.burns@intel.com)
* Thomas Faust (thomas.faust@intel.com)
* Ivan De Cesaris (ivan.de.cesaris@intel.com)
* Julien Carreno (julien.carreno@intel.com)
* Jeffrey Maxwell (jeffrey.r.maxwell@intel.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Contact Information:
* Intel Corporation
*/
/*
* @file
* This implements generic x86 32 bit memory and breakpoint operations.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <helper/log.h>
#include "target.h"
#include "target_type.h"
#include "register.h"
#include "breakpoints.h"
#include "x86_32_common.h"
static int set_debug_regs(struct target *t, uint32_t address,
uint8_t bp_num, uint8_t bp_type, uint8_t bp_length);
static int unset_debug_regs(struct target *t, uint8_t bp_num);
static int read_mem(struct target *t, uint32_t size,
uint32_t addr, uint8_t *buf);
static int write_mem(struct target *t, uint32_t size,
uint32_t addr, const uint8_t *buf);
static int calcaddr_physfromlin(struct target *t, target_addr_t addr,
target_addr_t *physaddr);
static int read_phys_mem(struct target *t, uint32_t phys_address,
uint32_t size, uint32_t count, uint8_t *buffer);
static int write_phys_mem(struct target *t, uint32_t phys_address,
uint32_t size, uint32_t count, const uint8_t *buffer);
static int set_breakpoint(struct target *target,
struct breakpoint *breakpoint);
static int unset_breakpoint(struct target *target,
struct breakpoint *breakpoint);
static int set_watchpoint(struct target *target,
struct watchpoint *watchpoint);
static int unset_watchpoint(struct target *target,
struct watchpoint *watchpoint);
static int read_hw_reg_to_cache(struct target *t, int num);
static int write_hw_reg_from_cache(struct target *t, int num);
int x86_32_get_gdb_reg_list(struct target *t,
struct reg **reg_list[], int *reg_list_size,
enum target_register_class reg_class)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
int i;
*reg_list_size = x86_32->cache->num_regs;
LOG_DEBUG("num_regs=%d, reg_class=%d", (*reg_list_size), reg_class);
*reg_list = malloc(sizeof(struct reg *) * (*reg_list_size));
if (*reg_list == NULL) {
LOG_ERROR("%s out of memory", __func__);
return ERROR_FAIL;
}
/* this will copy the values from our reg list to gdbs */
for (i = 0; i < (*reg_list_size); i++) {
(*reg_list)[i] = &x86_32->cache->reg_list[i];
LOG_DEBUG("value %s = %08" PRIx32, x86_32->cache->reg_list[i].name,
buf_get_u32(x86_32->cache->reg_list[i].value, 0, 32));
}
return ERROR_OK;
}
int x86_32_common_init_arch_info(struct target *t, struct x86_32_common *x86_32)
{
t->arch_info = x86_32;
x86_32->common_magic = X86_32_COMMON_MAGIC;
x86_32->num_hw_bpoints = MAX_DEBUG_REGS;
x86_32->hw_break_list = calloc(x86_32->num_hw_bpoints,
sizeof(struct x86_32_dbg_reg));
if (x86_32->hw_break_list == NULL) {
LOG_ERROR("%s out of memory", __func__);
return ERROR_FAIL;
}
x86_32->curr_tap = t->tap;
x86_32->fast_data_area = NULL;
x86_32->flush = 1;
x86_32->read_hw_reg_to_cache = read_hw_reg_to_cache;
x86_32->write_hw_reg_from_cache = write_hw_reg_from_cache;
return ERROR_OK;
}
int x86_32_common_mmu(struct target *t, int *enabled)
{
*enabled = true;
return ERROR_OK;
}
int x86_32_common_virt2phys(struct target *t, target_addr_t address, target_addr_t *physical)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
/*
* We need to ignore 'segmentation' for now, as OpenOCD can't handle
* segmented addresses.
* In protected mode that is almost OK, as (almost) any known OS is using
* flat segmentation. In real mode we use use the base of the DS segment,
* as we don't know better ...
*/
uint32_t cr0 = buf_get_u32(x86_32->cache->reg_list[CR0].value, 0, 32);
if (!(cr0 & CR0_PG)) {
/* target halted in real mode */
/* TODO: needs validation !!! */
uint32_t dsb = buf_get_u32(x86_32->cache->reg_list[DSB].value, 0, 32);
*physical = dsb + address;
} else {
/* target halted in protected mode */
if (calcaddr_physfromlin(t, address, physical) != ERROR_OK) {
LOG_ERROR("%s failed to calculate physical address from " TARGET_ADDR_FMT,
__func__, address);
return ERROR_FAIL;
}
}
return ERROR_OK;
}
int x86_32_common_read_phys_mem(struct target *t, target_addr_t phys_address,
uint32_t size, uint32_t count, uint8_t *buffer)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
int error;
error = read_phys_mem(t, phys_address, size, count, buffer);
if (error != ERROR_OK)
return error;
/* After reading memory from target, we must replace software breakpoints
* with the original instructions again.
*/
struct swbp_mem_patch *iter = x86_32->swbbp_mem_patch_list;
while (iter != NULL) {
if (iter->physaddr >= phys_address && iter->physaddr < phys_address+(size*count)) {
uint32_t offset = iter->physaddr - phys_address;
buffer[offset] = iter->orig_byte;
}
iter = iter->next;
}
return ERROR_OK;
}
static int read_phys_mem(struct target *t, uint32_t phys_address,
uint32_t size, uint32_t count, uint8_t *buffer)
{
int retval = ERROR_OK;
bool pg_disabled = false;
LOG_DEBUG("addr=0x%08" PRIx32 ", size=%" PRIu32 ", count=0x%" PRIx32 ", buf=%p",
phys_address, size, count, buffer);
struct x86_32_common *x86_32 = target_to_x86_32(t);
if (check_not_halted(t))
return ERROR_TARGET_NOT_HALTED;
if (!count || !buffer || !phys_address) {
LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=0x%08" PRIx32,
__func__, count, buffer, phys_address);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
/* to access physical memory, switch off the CR0.PG bit */
if (x86_32->is_paging_enabled(t)) {
retval = x86_32->disable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not disable paging", __func__);
return retval;
}
pg_disabled = true;
}
for (uint32_t i = 0; i < count; i++) {
switch (size) {
case BYTE:
retval = read_mem(t, size, phys_address + i, buffer + i);
break;
case WORD:
retval = read_mem(t, size, phys_address + i * 2, buffer + i * 2);
break;
case DWORD:
retval = read_mem(t, size, phys_address + i * 4, buffer + i * 4);
break;
default:
LOG_ERROR("%s invalid read size", __func__);
break;
}
if (retval != ERROR_OK)
break;
}
/* restore CR0.PG bit if needed (regardless of retval) */
if (pg_disabled) {
int retval2 = x86_32->enable_paging(t);
if (retval2 != ERROR_OK) {
LOG_ERROR("%s could not enable paging", __func__);
return retval2;
}
}
/* TODO: After reading memory from target, we must replace
* software breakpoints with the original instructions again.
* Solve this with the breakpoint fix
*/
return retval;
}
int x86_32_common_write_phys_mem(struct target *t, target_addr_t phys_address,
uint32_t size, uint32_t count, const uint8_t *buffer)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
int error = ERROR_OK;
uint8_t *newbuffer = NULL;
check_not_halted(t);
if (!count || !buffer || !phys_address) {
LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=" TARGET_ADDR_FMT,
__func__, count, buffer, phys_address);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
/* Before writing memory to target, we must update software breakpoints
* with the new instructions and patch the memory buffer with the
* breakpoint instruction.
*/
newbuffer = malloc(size*count);
if (newbuffer == NULL) {
LOG_ERROR("%s out of memory", __func__);
return ERROR_FAIL;
}
memcpy(newbuffer, buffer, size*count);
struct swbp_mem_patch *iter = x86_32->swbbp_mem_patch_list;
while (iter != NULL) {
if (iter->physaddr >= phys_address && iter->physaddr < phys_address+(size*count)) {
uint32_t offset = iter->physaddr - phys_address;
newbuffer[offset] = SW_BP_OPCODE;
/* update the breakpoint */
struct breakpoint *pbiter = t->breakpoints;
while (pbiter != NULL && pbiter->unique_id != iter->swbp_unique_id)
pbiter = pbiter->next;
if (pbiter)
pbiter->orig_instr[0] = buffer[offset];
}
iter = iter->next;
}
error = write_phys_mem(t, phys_address, size, count, newbuffer);
free(newbuffer);
return error;
}
static int write_phys_mem(struct target *t, uint32_t phys_address,
uint32_t size, uint32_t count, const uint8_t *buffer)
{
int retval = ERROR_OK;
bool pg_disabled = false;
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("addr=0x%08" PRIx32 ", size=%" PRIu32 ", count=0x%" PRIx32 ", buf=%p",
phys_address, size, count, buffer);
check_not_halted(t);
if (!count || !buffer || !phys_address) {
LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=0x%08" PRIx32,
__func__, count, buffer, phys_address);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
/* TODO: Before writing memory to target, we must update
* software breakpoints with the new instructions and
* patch the memory buffer with the breakpoint instruction.
* Solve this with the breakpoint fix
*/
/* to access physical memory, switch off the CR0.PG bit */
if (x86_32->is_paging_enabled(t)) {
retval = x86_32->disable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not disable paging", __func__);
return retval;
}
pg_disabled = true;
}
for (uint32_t i = 0; i < count; i++) {
switch (size) {
case BYTE:
retval = write_mem(t, size, phys_address + i, buffer + i);
break;
case WORD:
retval = write_mem(t, size, phys_address + i * 2, buffer + i * 2);
break;
case DWORD:
retval = write_mem(t, size, phys_address + i * 4, buffer + i * 4);
break;
default:
LOG_DEBUG("invalid read size");
break;
}
}
/* restore CR0.PG bit if needed (regardless of retval) */
if (pg_disabled) {
retval = x86_32->enable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not enable paging", __func__);
return retval;
}
}
return retval;
}
static int read_mem(struct target *t, uint32_t size,
uint32_t addr, uint8_t *buf)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
/* if CS.D bit=1 then its a 32 bit code segment, else 16 */
bool use32 = (buf_get_u32(x86_32->cache->reg_list[CSAR].value, 0, 32)) & CSAR_D;
int retval = x86_32->write_hw_reg(t, EAX, addr, 0);
if (retval != ERROR_OK) {
LOG_ERROR("%s error write EAX", __func__);
return retval;
}
switch (size) {
case BYTE:
if (use32)
retval = x86_32->submit_instruction(t, MEMRDB32);
else
retval = x86_32->submit_instruction(t, MEMRDB16);
break;
case WORD:
if (use32)
retval = x86_32->submit_instruction(t, MEMRDH32);
else
retval = x86_32->submit_instruction(t, MEMRDH16);
break;
case DWORD:
if (use32)
retval = x86_32->submit_instruction(t, MEMRDW32);
else
retval = x86_32->submit_instruction(t, MEMRDW16);
break;
default:
LOG_ERROR("%s invalid read mem size", __func__);
break;
}
if (retval != ERROR_OK)
return retval;
/* read_hw_reg() will write to 4 bytes (uint32_t)
* Watch out, the buffer passed into read_mem() might be 1 or 2 bytes.
*/
uint32_t regval;
retval = x86_32->read_hw_reg(t, EDX, &regval, 0);
if (retval != ERROR_OK) {
LOG_ERROR("%s error read EDX", __func__);
return retval;
}
for (uint8_t i = 0; i < size; i++)
buf[i] = (regval >> (i*8)) & 0x000000FF;
retval = x86_32->transaction_status(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s error on mem read", __func__);
return retval;
}
return retval;
}
static int write_mem(struct target *t, uint32_t size,
uint32_t addr, const uint8_t *buf)
{
uint32_t i = 0;
uint32_t buf4bytes = 0;
int retval = ERROR_OK;
struct x86_32_common *x86_32 = target_to_x86_32(t);
for (i = 0; i < size; ++i) {
buf4bytes = buf4bytes << 8; /* first time we only shift 0s */
buf4bytes += buf[(size-1)-i]; /* it was hard to write, should be hard to read! */
}
/* if CS.D bit=1 then its a 32 bit code segment, else 16 */
bool use32 = (buf_get_u32(x86_32->cache->reg_list[CSAR].value, 0, 32)) & CSAR_D;
retval = x86_32->write_hw_reg(t, EAX, addr, 0);
if (retval != ERROR_OK) {
LOG_ERROR("%s error write EAX", __func__);
return retval;
}
/* write_hw_reg() will write to 4 bytes (uint32_t)
* Watch out, the buffer passed into write_mem() might be 1 or 2 bytes.
*/
retval = x86_32->write_hw_reg(t, EDX, buf4bytes, 0);
if (retval != ERROR_OK) {
LOG_ERROR("%s error write EDX", __func__);
return retval;
}
switch (size) {
case BYTE:
if (use32)
retval = x86_32->submit_instruction(t, MEMWRB32);
else
retval = x86_32->submit_instruction(t, MEMWRB16);
break;
case WORD:
if (use32)
retval = x86_32->submit_instruction(t, MEMWRH32);
else
retval = x86_32->submit_instruction(t, MEMWRH16);
break;
case DWORD:
if (use32)
retval = x86_32->submit_instruction(t, MEMWRW32);
else
retval = x86_32->submit_instruction(t, MEMWRW16);
break;
default:
LOG_ERROR("%s invalid write mem size", __func__);
return ERROR_FAIL;
}
if (retval != ERROR_OK)
return retval;
retval = x86_32->transaction_status(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s error on mem write", __func__);
return retval;
}
return retval;
}
int calcaddr_physfromlin(struct target *t, target_addr_t addr, target_addr_t *physaddr)
{
uint8_t entry_buffer[8];
if (physaddr == NULL || t == NULL)
return ERROR_FAIL;
struct x86_32_common *x86_32 = target_to_x86_32(t);
/* The 'user-visible' CR0.PG should be set - otherwise the function shouldn't be called
* (Don't check the CR0.PG on the target, this might be temporally disabled at this point)
*/
uint32_t cr0 = buf_get_u32(x86_32->cache->reg_list[CR0].value, 0, 32);
if (!(cr0 & CR0_PG)) {
/* you are wrong in this function, never mind */
*physaddr = addr;
return ERROR_OK;
}
uint32_t cr4 = buf_get_u32(x86_32->cache->reg_list[CR4].value, 0, 32);
bool isPAE = cr4 & 0x00000020; /* PAE - Physical Address Extension */
uint32_t cr3 = buf_get_u32(x86_32->cache->reg_list[CR3].value, 0, 32);
if (isPAE) {
uint32_t pdpt_base = cr3 & 0xFFFFF000; /* lower 12 bits of CR3 must always be 0 */
uint32_t pdpt_index = (addr & 0xC0000000) >> 30; /* A[31:30] index to PDPT */
uint32_t pdpt_addr = pdpt_base + (8 * pdpt_index);
if (x86_32_common_read_phys_mem(t, pdpt_addr, 4, 2, entry_buffer) != ERROR_OK) {
LOG_ERROR("%s couldn't read page directory pointer table entry at 0x%08" PRIx32,
__func__, pdpt_addr);
return ERROR_FAIL;
}
uint64_t pdpt_entry = target_buffer_get_u64(t, entry_buffer);
if (!(pdpt_entry & 0x0000000000000001)) {
LOG_ERROR("%s page directory pointer table entry at 0x%08" PRIx32 " is not present",
__func__, pdpt_addr);
return ERROR_FAIL;
}
uint32_t pd_base = pdpt_entry & 0xFFFFF000; /* A[31:12] is PageTable/Page Base Address */
uint32_t pd_index = (addr & 0x3FE00000) >> 21; /* A[29:21] index to PD entry with PAE */
uint32_t pd_addr = pd_base + (8 * pd_index);
if (x86_32_common_read_phys_mem(t, pd_addr, 4, 2, entry_buffer) != ERROR_OK) {
LOG_ERROR("%s couldn't read page directory entry at 0x%08" PRIx32,
__func__, pd_addr);
return ERROR_FAIL;
}
uint64_t pd_entry = target_buffer_get_u64(t, entry_buffer);
if (!(pd_entry & 0x0000000000000001)) {
LOG_ERROR("%s page directory entry at 0x%08" PRIx32 " is not present",
__func__, pd_addr);
return ERROR_FAIL;
}
/* PS bit in PD entry is indicating 4KB or 2MB page size */
if (pd_entry & 0x0000000000000080) {
uint32_t page_base = (uint32_t)(pd_entry & 0x00000000FFE00000); /* [31:21] */
uint32_t offset = addr & 0x001FFFFF; /* [20:0] */
*physaddr = page_base + offset;
return ERROR_OK;
} else {
uint32_t pt_base = (uint32_t)(pd_entry & 0x00000000FFFFF000); /*[31:12]*/
uint32_t pt_index = (addr & 0x001FF000) >> 12; /*[20:12]*/
uint32_t pt_addr = pt_base + (8 * pt_index);
if (x86_32_common_read_phys_mem(t, pt_addr, 4, 2, entry_buffer) != ERROR_OK) {
LOG_ERROR("%s couldn't read page table entry at 0x%08" PRIx32, __func__, pt_addr);
return ERROR_FAIL;
}
uint64_t pt_entry = target_buffer_get_u64(t, entry_buffer);
if (!(pt_entry & 0x0000000000000001)) {
LOG_ERROR("%s page table entry at 0x%08" PRIx32 " is not present", __func__, pt_addr);
return ERROR_FAIL;
}
uint32_t page_base = (uint32_t)(pt_entry & 0x00000000FFFFF000); /*[31:12]*/
uint32_t offset = addr & 0x00000FFF; /*[11:0]*/
*physaddr = page_base + offset;
return ERROR_OK;
}
} else {
uint32_t pd_base = cr3 & 0xFFFFF000; /* lower 12 bits of CR3 must always be 0 */
uint32_t pd_index = (addr & 0xFFC00000) >> 22; /* A[31:22] index to PD entry */
uint32_t pd_addr = pd_base + (4 * pd_index);
if (x86_32_common_read_phys_mem(t, pd_addr, 4, 1, entry_buffer) != ERROR_OK) {
LOG_ERROR("%s couldn't read page directory entry at 0x%08" PRIx32, __func__, pd_addr);
return ERROR_FAIL;
}
uint32_t pd_entry = target_buffer_get_u32(t, entry_buffer);
if (!(pd_entry & 0x00000001)) {
LOG_ERROR("%s page directory entry at 0x%08" PRIx32 " is not present", __func__, pd_addr);
return ERROR_FAIL;
}
/* Bit 7 in page directory entry is page size.
*/
if (pd_entry & 0x00000080) {
/* 4MB pages */
uint32_t page_base = pd_entry & 0xFFC00000;
*physaddr = page_base + (addr & 0x003FFFFF);
} else {
/* 4KB pages */
uint32_t pt_base = pd_entry & 0xFFFFF000; /* A[31:12] is PageTable/Page Base Address */
uint32_t pt_index = (addr & 0x003FF000) >> 12; /* A[21:12] index to page table entry */
uint32_t pt_addr = pt_base + (4 * pt_index);
if (x86_32_common_read_phys_mem(t, pt_addr, 4, 1, entry_buffer) != ERROR_OK) {
LOG_ERROR("%s couldn't read page table entry at 0x%08" PRIx32, __func__, pt_addr);
return ERROR_FAIL;
}
uint32_t pt_entry = target_buffer_get_u32(t, entry_buffer);
if (!(pt_entry & 0x00000001)) {
LOG_ERROR("%s page table entry at 0x%08" PRIx32 " is not present", __func__, pt_addr);
return ERROR_FAIL;
}
uint32_t page_base = pt_entry & 0xFFFFF000; /* A[31:12] is PageTable/Page Base Address */
*physaddr = page_base + (addr & 0x00000FFF); /* A[11:0] offset to 4KB page in linear address */
}
}
return ERROR_OK;
}
int x86_32_common_read_memory(struct target *t, target_addr_t addr,
uint32_t size, uint32_t count, uint8_t *buf)
{
int retval = ERROR_OK;
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("addr=" TARGET_ADDR_FMT ", size=%" PRIu32 ", count=0x%" PRIx32 ", buf=%p",
addr, size, count, buf);
check_not_halted(t);
if (!count || !buf || !addr) {
LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=" TARGET_ADDR_FMT,
__func__, count, buf, addr);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
if (x86_32->is_paging_enabled(t)) {
/* all memory accesses from debugger must be physical (CR0.PG == 0)
* conversion to physical address space needed
*/
retval = x86_32->disable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not disable paging", __func__);
return retval;
}
target_addr_t physaddr = 0;
if (calcaddr_physfromlin(t, addr, &physaddr) != ERROR_OK) {
LOG_ERROR("%s failed to calculate physical address from " TARGET_ADDR_FMT,
__func__, addr);
retval = ERROR_FAIL;
}
/* TODO: !!! Watch out for page boundaries
* for every 4kB, the physical address has to be re-calculated
* This should be fixed together with bulk memory reads
*/
if (retval == ERROR_OK
&& x86_32_common_read_phys_mem(t, physaddr, size, count, buf) != ERROR_OK) {
LOG_ERROR("%s failed to read memory from physical address " TARGET_ADDR_FMT,
__func__, physaddr);
}
/* restore PG bit if it was cleared prior (regardless of retval) */
retval = x86_32->enable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not enable paging", __func__);
return retval;
}
} else {
/* paging is off - linear address is physical address */
if (x86_32_common_read_phys_mem(t, addr, size, count, buf) != ERROR_OK) {
LOG_ERROR("%s failed to read memory from address " TARGET_ADDR_FMT,
__func__, addr);
retval = ERROR_FAIL;
}
}
return retval;
}
int x86_32_common_write_memory(struct target *t, target_addr_t addr,
uint32_t size, uint32_t count, const uint8_t *buf)
{
int retval = ERROR_OK;
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("addr=" TARGET_ADDR_FMT ", size=%" PRIu32 ", count=0x%" PRIx32 ", buf=%p",
addr, size, count, buf);
check_not_halted(t);
if (!count || !buf || !addr) {
LOG_ERROR("%s invalid params count=0x%" PRIx32 ", buf=%p, addr=" TARGET_ADDR_FMT,
__func__, count, buf, addr);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
if (x86_32->is_paging_enabled(t)) {
/* all memory accesses from debugger must be physical (CR0.PG == 0)
* conversion to physical address space needed
*/
retval = x86_32->disable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not disable paging", __func__);
return retval;
}
target_addr_t physaddr = 0;
if (calcaddr_physfromlin(t, addr, &physaddr) != ERROR_OK) {
LOG_ERROR("%s failed to calculate physical address from " TARGET_ADDR_FMT,
__func__, addr);
retval = ERROR_FAIL;
}
/* TODO: !!! Watch out for page boundaries
* for every 4kB, the physical address has to be re-calculated
* This should be fixed together with bulk memory reads
*/
if (retval == ERROR_OK
&& x86_32_common_write_phys_mem(t, physaddr, size, count, buf) != ERROR_OK) {
LOG_ERROR("%s failed to write memory to physical address " TARGET_ADDR_FMT,
__func__, physaddr);
}
/* restore PG bit if it was cleared prior (regardless of retval) */
retval = x86_32->enable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not enable paging", __func__);
return retval;
}
} else {
/* paging is off - linear address is physical address */
if (x86_32_common_write_phys_mem(t, addr, size, count, buf) != ERROR_OK) {
LOG_ERROR("%s failed to write memory to address " TARGET_ADDR_FMT,
__func__, addr);
retval = ERROR_FAIL;
}
}
return retval;
}
int x86_32_common_read_io(struct target *t, uint32_t addr,
uint32_t size, uint8_t *buf)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
/* if CS.D bit=1 then its a 32 bit code segment, else 16 */
bool use32 = (buf_get_u32(x86_32->cache->reg_list[CSAR].value, 0, 32)) & CSAR_D;
int retval = ERROR_FAIL;
bool pg_disabled = false;
LOG_DEBUG("addr=0x%08" PRIx32 ", size=%" PRIu32 ", buf=%p", addr, size, buf);
check_not_halted(t);
if (!buf || !addr) {
LOG_ERROR("%s invalid params buf=%p, addr=%08" PRIx32, __func__, buf, addr);
return retval;
}
retval = x86_32->write_hw_reg(t, EDX, addr, 0);
if (retval != ERROR_OK) {
LOG_ERROR("%s error EDX write", __func__);
return retval;
}
/* to access physical memory, switch off the CR0.PG bit */
if (x86_32->is_paging_enabled(t)) {
retval = x86_32->disable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not disable paging", __func__);
return retval;
}
pg_disabled = true;
}
switch (size) {
case BYTE:
if (use32)
retval = x86_32->submit_instruction(t, IORDB32);
else
retval = x86_32->submit_instruction(t, IORDB16);
break;
case WORD:
if (use32)
retval = x86_32->submit_instruction(t, IORDH32);
else
retval = x86_32->submit_instruction(t, IORDH16);
break;
case DWORD:
if (use32)
retval = x86_32->submit_instruction(t, IORDW32);
else
retval = x86_32->submit_instruction(t, IORDW16);
break;
default:
LOG_ERROR("%s invalid read io size", __func__);
return ERROR_FAIL;
}
/* restore CR0.PG bit if needed */
if (pg_disabled) {
int retval2 = x86_32->enable_paging(t);
if (retval2 != ERROR_OK) {
LOG_ERROR("%s could not enable paging", __func__);
return retval2;
}
}
if (retval != ERROR_OK)
return retval;
uint32_t regval = 0;
retval = x86_32->read_hw_reg(t, EAX, &regval, 0);
if (retval != ERROR_OK) {
LOG_ERROR("%s error on read EAX", __func__);
return retval;
}
for (uint8_t i = 0; i < size; i++)
buf[i] = (regval >> (i*8)) & 0x000000FF;
retval = x86_32->transaction_status(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s error on io read", __func__);
return retval;
}
return retval;
}
int x86_32_common_write_io(struct target *t, uint32_t addr,
uint32_t size, const uint8_t *buf)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
/* if CS.D bit=1 then its a 32 bit code segment, else 16 */
bool use32 = (buf_get_u32(x86_32->cache->reg_list[CSAR].value, 0, 32)) & CSAR_D;
LOG_DEBUG("addr=0x%08" PRIx32 ", size=%" PRIu32 ", buf=%p", addr, size, buf);
check_not_halted(t);
int retval = ERROR_FAIL;
bool pg_disabled = false;
if (!buf || !addr) {
LOG_ERROR("%s invalid params buf=%p, addr=0x%08" PRIx32, __func__, buf, addr);
return retval;
}
/* no do the write */
retval = x86_32->write_hw_reg(t, EDX, addr, 0);
if (retval != ERROR_OK) {
LOG_ERROR("%s error on EDX write", __func__);
return retval;
}
uint32_t regval = 0;
for (uint8_t i = 0; i < size; i++)
regval += (buf[i] << (i*8));
retval = x86_32->write_hw_reg(t, EAX, regval, 0);
if (retval != ERROR_OK) {
LOG_ERROR("%s error on EAX write", __func__);
return retval;
}
/* to access physical memory, switch off the CR0.PG bit */
if (x86_32->is_paging_enabled(t)) {
retval = x86_32->disable_paging(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s could not disable paging", __func__);
return retval;
}
pg_disabled = true;
}
switch (size) {
case BYTE:
if (use32)
retval = x86_32->submit_instruction(t, IOWRB32);
else
retval = x86_32->submit_instruction(t, IOWRB16);
break;
case WORD:
if (use32)
retval = x86_32->submit_instruction(t, IOWRH32);
else
retval = x86_32->submit_instruction(t, IOWRH16);
break;
case DWORD:
if (use32)
retval = x86_32->submit_instruction(t, IOWRW32);
else
retval = x86_32->submit_instruction(t, IOWRW16);
break;
default:
LOG_ERROR("%s invalid write io size", __func__);
return ERROR_FAIL;
}
/* restore CR0.PG bit if needed */
if (pg_disabled) {
int retval2 = x86_32->enable_paging(t);
if (retval2 != ERROR_OK) {
LOG_ERROR("%s could not enable paging", __func__);
return retval2;
}
}
if (retval != ERROR_OK)
return retval;
retval = x86_32->transaction_status(t);
if (retval != ERROR_OK) {
LOG_ERROR("%s error on io write", __func__);
return retval;
}
return retval;
}
int x86_32_common_add_watchpoint(struct target *t, struct watchpoint *wp)
{
check_not_halted(t);
/* set_watchpoint() will return ERROR_TARGET_RESOURCE_NOT_AVAILABLE if all
* hardware registers are gone
*/
return set_watchpoint(t, wp);
}
int x86_32_common_remove_watchpoint(struct target *t, struct watchpoint *wp)
{
if (check_not_halted(t))
return ERROR_TARGET_NOT_HALTED;
if (wp->set)
unset_watchpoint(t, wp);
return ERROR_OK;
}
int x86_32_common_add_breakpoint(struct target *t, struct breakpoint *bp)
{
LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, bp->type, bp->address);
if (check_not_halted(t))
return ERROR_TARGET_NOT_HALTED;
/* set_breakpoint() will return ERROR_TARGET_RESOURCE_NOT_AVAILABLE if all
* hardware registers are gone (for hardware breakpoints)
*/
return set_breakpoint(t, bp);
}
int x86_32_common_remove_breakpoint(struct target *t, struct breakpoint *bp)
{
LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, bp->type, bp->address);
if (check_not_halted(t))
return ERROR_TARGET_NOT_HALTED;
if (bp->set)
unset_breakpoint(t, bp);
return ERROR_OK;
}
static int set_debug_regs(struct target *t, uint32_t address,
uint8_t bp_num, uint8_t bp_type, uint8_t bp_length)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("addr=0x%08" PRIx32 ", bp_num=%" PRIu8 ", bp_type=%" PRIu8 ", pb_length=%" PRIu8,
address, bp_num, bp_type, bp_length);
/* DR7 - set global enable */
uint32_t dr7 = buf_get_u32(x86_32->cache->reg_list[DR7].value, 0, 32);
if (bp_length != 1 && bp_length != 2 && bp_length != 4)
return ERROR_FAIL;
if (DR7_BP_FREE(dr7, bp_num))
DR7_GLOBAL_ENABLE(dr7, bp_num);
else {
LOG_ERROR("%s dr7 error, already enabled, val=%08" PRIx32, __func__, dr7);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
switch (bp_type) {
case 0:
/* 00 - only on instruction execution */
DR7_SET_EXE(dr7, bp_num);
DR7_SET_LENGTH(dr7, bp_num, bp_length);
break;
case 1:
/* 01 - only on data writes */
DR7_SET_WRITE(dr7, bp_num);
DR7_SET_LENGTH(dr7, bp_num, bp_length);
break;
case 2:
/* 10 UNSUPPORTED - an I/O read and I/O write */
LOG_ERROR("%s unsupported feature bp_type=%d", __func__, bp_type);
return ERROR_FAIL;
break;
case 3:
/* on data read or data write */
DR7_SET_ACCESS(dr7, bp_num);
DR7_SET_LENGTH(dr7, bp_num, bp_length);
break;
default:
LOG_ERROR("%s invalid request [only 0-3] bp_type=%d", __func__, bp_type);
return ERROR_FAIL;
}
/* update regs in the reg cache ready to be written to hardware
* when we exit PM
*/
buf_set_u32(x86_32->cache->reg_list[bp_num+DR0].value, 0, 32, address);
x86_32->cache->reg_list[bp_num+DR0].dirty = 1;
x86_32->cache->reg_list[bp_num+DR0].valid = 1;
buf_set_u32(x86_32->cache->reg_list[DR6].value, 0, 32, PM_DR6);
x86_32->cache->reg_list[DR6].dirty = 1;
x86_32->cache->reg_list[DR6].valid = 1;
buf_set_u32(x86_32->cache->reg_list[DR7].value, 0, 32, dr7);
x86_32->cache->reg_list[DR7].dirty = 1;
x86_32->cache->reg_list[DR7].valid = 1;
return ERROR_OK;
}
static int unset_debug_regs(struct target *t, uint8_t bp_num)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("bp_num=%" PRIu8, bp_num);
uint32_t dr7 = buf_get_u32(x86_32->cache->reg_list[DR7].value, 0, 32);
if (!(DR7_BP_FREE(dr7, bp_num))) {
DR7_GLOBAL_DISABLE(dr7, bp_num);
} else {
LOG_ERROR("%s dr7 error, not enabled, val=0x%08" PRIx32, __func__, dr7);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
/* this will clear rw and len bits */
DR7_RESET_RWLEN_BITS(dr7, bp_num);
/* update regs in the reg cache ready to be written to hardware
* when we exit PM
*/
buf_set_u32(x86_32->cache->reg_list[bp_num+DR0].value, 0, 32, 0);
x86_32->cache->reg_list[bp_num+DR0].dirty = 1;
x86_32->cache->reg_list[bp_num+DR0].valid = 1;
buf_set_u32(x86_32->cache->reg_list[DR6].value, 0, 32, PM_DR6);
x86_32->cache->reg_list[DR6].dirty = 1;
x86_32->cache->reg_list[DR6].valid = 1;
buf_set_u32(x86_32->cache->reg_list[DR7].value, 0, 32, dr7);
x86_32->cache->reg_list[DR7].dirty = 1;
x86_32->cache->reg_list[DR7].valid = 1;
return ERROR_OK;
}
static int set_hwbp(struct target *t, struct breakpoint *bp)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
struct x86_32_dbg_reg *debug_reg_list = x86_32->hw_break_list;
uint8_t hwbp_num = 0;
while (debug_reg_list[hwbp_num].used && (hwbp_num < x86_32->num_hw_bpoints))
hwbp_num++;
if (hwbp_num >= x86_32->num_hw_bpoints) {
LOG_ERROR("%s no free hw breakpoint bpid=0x%" PRIx32, __func__, bp->unique_id);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
if (set_debug_regs(t, bp->address, hwbp_num, DR7_BP_EXECUTE, 1) != ERROR_OK)
return ERROR_FAIL;
bp->set = hwbp_num + 1;
debug_reg_list[hwbp_num].used = 1;
debug_reg_list[hwbp_num].bp_value = bp->address;
LOG_USER("%s hardware breakpoint %" PRIu32 " set at 0x%08" PRIx32 " (hwreg=%" PRIu8 ")", __func__,
bp->unique_id, debug_reg_list[hwbp_num].bp_value, hwbp_num);
return ERROR_OK;
}
static int unset_hwbp(struct target *t, struct breakpoint *bp)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
struct x86_32_dbg_reg *debug_reg_list = x86_32->hw_break_list;
int hwbp_num = bp->set - 1;
if ((hwbp_num < 0) || (hwbp_num >= x86_32->num_hw_bpoints)) {
LOG_ERROR("%s invalid breakpoint number=%d, bpid=%" PRIu32,
__func__, hwbp_num, bp->unique_id);
return ERROR_OK;
}
if (unset_debug_regs(t, hwbp_num) != ERROR_OK)
return ERROR_FAIL;
debug_reg_list[hwbp_num].used = 0;
debug_reg_list[hwbp_num].bp_value = 0;
LOG_USER("%s hardware breakpoint %" PRIu32 " removed from " TARGET_ADDR_FMT " (hwreg=%d)",
__func__, bp->unique_id, bp->address, hwbp_num);
return ERROR_OK;
}
static int set_swbp(struct target *t, struct breakpoint *bp)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("id %" PRIx32, bp->unique_id);
target_addr_t physaddr;
uint8_t opcode = SW_BP_OPCODE;
uint8_t readback;
if (calcaddr_physfromlin(t, bp->address, &physaddr) != ERROR_OK)
return ERROR_FAIL;
if (read_phys_mem(t, physaddr, 1, 1, bp->orig_instr))
return ERROR_FAIL;
LOG_DEBUG("set software breakpoint - orig byte=0x%02" PRIx8 "", *bp->orig_instr);
/* just write the instruction trap byte */
if (write_phys_mem(t, physaddr, 1, 1, &opcode))
return ERROR_FAIL;
/* verify that this is not invalid/read-only memory */
if (read_phys_mem(t, physaddr, 1, 1, &readback))
return ERROR_FAIL;
if (readback != SW_BP_OPCODE) {
LOG_ERROR("%s software breakpoint error at " TARGET_ADDR_FMT ", check memory",
__func__, bp->address);
LOG_ERROR("%s readback=0x%02" PRIx8 " orig=0x%02" PRIx8 "",
__func__, readback, *bp->orig_instr);
return ERROR_FAIL;
}
bp->set = SW_BP_OPCODE; /* just non 0 */
/* add the memory patch */
struct swbp_mem_patch *new_patch = malloc(sizeof(struct swbp_mem_patch));
if (new_patch == NULL) {
LOG_ERROR("%s out of memory", __func__);
return ERROR_FAIL;
}
new_patch->next = NULL;
new_patch->orig_byte = *bp->orig_instr;
new_patch->physaddr = physaddr;
new_patch->swbp_unique_id = bp->unique_id;
struct swbp_mem_patch *addto = x86_32->swbbp_mem_patch_list;
if (addto == NULL)
x86_32->swbbp_mem_patch_list = new_patch;
else {
while (addto->next != NULL)
addto = addto->next;
addto->next = new_patch;
}
LOG_USER("%s software breakpoint %" PRIu32 " set at " TARGET_ADDR_FMT,
__func__, bp->unique_id, bp->address);
return ERROR_OK;
}
static int unset_swbp(struct target *t, struct breakpoint *bp)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("id %" PRIx32, bp->unique_id);
target_addr_t physaddr;
uint8_t current_instr;
/* check that user program has not modified breakpoint instruction */
if (calcaddr_physfromlin(t, bp->address, &physaddr) != ERROR_OK)
return ERROR_FAIL;
if (read_phys_mem(t, physaddr, 1, 1, &current_instr))
return ERROR_FAIL;
if (current_instr == SW_BP_OPCODE) {
if (write_phys_mem(t, physaddr, 1, 1, bp->orig_instr))
return ERROR_FAIL;
} else {
LOG_ERROR("%s software breakpoint remove error at " TARGET_ADDR_FMT ", check memory",
__func__, bp->address);
LOG_ERROR("%s current=0x%02" PRIx8 " orig=0x%02" PRIx8 "",
__func__, current_instr, *bp->orig_instr);
return ERROR_FAIL;
}
/* remove from patch */
struct swbp_mem_patch *iter = x86_32->swbbp_mem_patch_list;
if (iter != NULL) {
if (iter->swbp_unique_id == bp->unique_id) {
/* it's the first item */
x86_32->swbbp_mem_patch_list = iter->next;
free(iter);
} else {
while (iter->next != NULL && iter->next->swbp_unique_id != bp->unique_id)
iter = iter->next;
if (iter->next != NULL) {
/* it's the next one */
struct swbp_mem_patch *freeme = iter->next;
iter->next = iter->next->next;
free(freeme);
}
}
}
LOG_USER("%s software breakpoint %" PRIu32 " removed from " TARGET_ADDR_FMT,
__func__, bp->unique_id, bp->address);
return ERROR_OK;
}
static int set_breakpoint(struct target *t, struct breakpoint *bp)
{
int error = ERROR_OK;
struct x86_32_common *x86_32 = target_to_x86_32(t);
LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, bp->type, bp->address);
if (bp->set) {
LOG_ERROR("breakpoint already set");
return error;
}
if (bp->type == BKPT_HARD) {
error = set_hwbp(t, bp);
if (error != ERROR_OK) {
LOG_ERROR("%s error setting hardware breakpoint at " TARGET_ADDR_FMT,
__func__, bp->address);
return error;
}
} else {
if (x86_32->sw_bpts_supported(t)) {
error = set_swbp(t, bp);
if (error != ERROR_OK) {
LOG_ERROR("%s error setting software breakpoint at " TARGET_ADDR_FMT,
__func__, bp->address);
return error;
}
} else {
LOG_ERROR("%s core doesn't support SW breakpoints", __func__);
return ERROR_FAIL;
}
}
return error;
}
static int unset_breakpoint(struct target *t, struct breakpoint *bp)
{
LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, bp->type, bp->address);
if (!bp->set) {
LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
if (bp->type == BKPT_HARD) {
if (unset_hwbp(t, bp) != ERROR_OK) {
LOG_ERROR("%s error removing hardware breakpoint at " TARGET_ADDR_FMT,
__func__, bp->address);
return ERROR_FAIL;
}
} else {
if (unset_swbp(t, bp) != ERROR_OK) {
LOG_ERROR("%s error removing software breakpoint at " TARGET_ADDR_FMT,
__func__, bp->address);
return ERROR_FAIL;
}
}
bp->set = 0;
return ERROR_OK;
}
static int set_watchpoint(struct target *t, struct watchpoint *wp)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
struct x86_32_dbg_reg *debug_reg_list = x86_32->hw_break_list;
int wp_num = 0;
LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, wp->rw, wp->address);
if (wp->set) {
LOG_ERROR("%s watchpoint already set", __func__);
return ERROR_OK;
}
if (wp->rw == WPT_READ) {
LOG_ERROR("%s no support for 'read' watchpoints, use 'access' or 'write'"
, __func__);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
while (debug_reg_list[wp_num].used && (wp_num < x86_32->num_hw_bpoints))
wp_num++;
if (wp_num >= x86_32->num_hw_bpoints) {
LOG_ERROR("%s no debug registers left", __func__);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
if (wp->length != 4 && wp->length != 2 && wp->length != 1) {
LOG_ERROR("%s only watchpoints of length 1, 2 or 4 are supported", __func__);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
switch (wp->rw) {
case WPT_WRITE:
if (set_debug_regs(t, wp->address, wp_num,
DR7_BP_WRITE, wp->length) != ERROR_OK) {
return ERROR_FAIL;
}
break;
case WPT_ACCESS:
if (set_debug_regs(t, wp->address, wp_num, DR7_BP_READWRITE,
wp->length) != ERROR_OK) {
return ERROR_FAIL;
}
break;
default:
LOG_ERROR("%s only 'access' or 'write' watchpoints are supported", __func__);
break;
}
wp->set = wp_num + 1;
debug_reg_list[wp_num].used = 1;
debug_reg_list[wp_num].bp_value = wp->address;
LOG_USER("'%s' watchpoint %d set at " TARGET_ADDR_FMT " with length %" PRIu32 " (hwreg=%d)",
wp->rw == WPT_READ ? "read" : wp->rw == WPT_WRITE ?
"write" : wp->rw == WPT_ACCESS ? "access" : "?",
wp->unique_id, wp->address, wp->length, wp_num);
return ERROR_OK;
}
static int unset_watchpoint(struct target *t, struct watchpoint *wp)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
struct x86_32_dbg_reg *debug_reg_list = x86_32->hw_break_list;
LOG_DEBUG("type=%d, addr=" TARGET_ADDR_FMT, wp->rw, wp->address);
if (!wp->set) {
LOG_WARNING("watchpoint not set");
return ERROR_OK;
}
int wp_num = wp->set - 1;
if ((wp_num < 0) || (wp_num >= x86_32->num_hw_bpoints)) {
LOG_DEBUG("Invalid FP Comparator number in watchpoint");
return ERROR_OK;
}
if (unset_debug_regs(t, wp_num) != ERROR_OK)
return ERROR_FAIL;
debug_reg_list[wp_num].used = 0;
debug_reg_list[wp_num].bp_value = 0;
wp->set = 0;
LOG_USER("'%s' watchpoint %d removed from " TARGET_ADDR_FMT " with length %" PRIu32 " (hwreg=%d)",
wp->rw == WPT_READ ? "read" : wp->rw == WPT_WRITE ?
"write" : wp->rw == WPT_ACCESS ? "access" : "?",
wp->unique_id, wp->address, wp->length, wp_num);
return ERROR_OK;
}
/* after reset breakpoints and watchpoints in memory are not valid anymore and
* debug registers are cleared.
* we can't afford to remove sw breakpoints using the default methods as the
* memory doesn't have the same layout yet and an access might crash the target,
* so we just clear the openocd breakpoints structures.
*/
void x86_32_common_reset_breakpoints_watchpoints(struct target *t)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
struct x86_32_dbg_reg *debug_reg_list = x86_32->hw_break_list;
struct breakpoint *next_b;
struct watchpoint *next_w;
while (t->breakpoints) {
next_b = t->breakpoints->next;
free(t->breakpoints->orig_instr);
free(t->breakpoints);
t->breakpoints = next_b;
}
while (t->watchpoints) {
next_w = t->watchpoints->next;
free(t->watchpoints);
t->watchpoints = next_w;
}
for (int i = 0; i < x86_32->num_hw_bpoints; i++) {
debug_reg_list[i].used = 0;
debug_reg_list[i].bp_value = 0;
}
}
static int read_hw_reg_to_cache(struct target *t, int num)
{
uint32_t reg_value;
struct x86_32_common *x86_32 = target_to_x86_32(t);
if (check_not_halted(t))
return ERROR_TARGET_NOT_HALTED;
if ((num < 0) || (num >= x86_32->get_num_user_regs(t)))
return ERROR_COMMAND_SYNTAX_ERROR;
if (x86_32->read_hw_reg(t, num, &reg_value, 1) != ERROR_OK) {
LOG_ERROR("%s fail for %s", x86_32->cache->reg_list[num].name, __func__);
return ERROR_FAIL;
}
LOG_DEBUG("reg %s value 0x%08" PRIx32,
x86_32->cache->reg_list[num].name, reg_value);
return ERROR_OK;
}
static int write_hw_reg_from_cache(struct target *t, int num)
{
struct x86_32_common *x86_32 = target_to_x86_32(t);
if (check_not_halted(t))
return ERROR_TARGET_NOT_HALTED;
if ((num < 0) || (num >= x86_32->get_num_user_regs(t)))
return ERROR_COMMAND_SYNTAX_ERROR;
if (x86_32->write_hw_reg(t, num, 0, 1) != ERROR_OK) {
LOG_ERROR("%s fail for %s", x86_32->cache->reg_list[num].name, __func__);
return ERROR_FAIL;
}
LOG_DEBUG("reg %s value 0x%08" PRIx32, x86_32->cache->reg_list[num].name,
buf_get_u32(x86_32->cache->reg_list[num].value, 0, 32));
return ERROR_OK;
}
/* x86 32 commands */
static void handle_iod_output(struct command_context *cmd_ctx,
struct target *target, uint32_t address, unsigned size,
unsigned count, const uint8_t *buffer)
{
const unsigned line_bytecnt = 32;
unsigned line_modulo = line_bytecnt / size;
char output[line_bytecnt * 4 + 1];
unsigned output_len = 0;
const char *value_fmt;
switch (size) {
case 4:
value_fmt = "%8.8x ";
break;
case 2:
value_fmt = "%4.4x ";
break;
case 1:
value_fmt = "%2.2x ";
break;
default:
/* "can't happen", caller checked */
LOG_ERROR("%s invalid memory read size: %u", __func__, size);
return;
}
for (unsigned i = 0; i < count; i++) {
if (i % line_modulo == 0) {
output_len += snprintf(output + output_len,
sizeof(output) - output_len,
"0x%8.8x: ",
(unsigned)(address + (i*size)));
}
uint32_t value = 0;
const uint8_t *value_ptr = buffer + i * size;
switch (size) {
case 4:
value = target_buffer_get_u32(target, value_ptr);
break;
case 2:
value = target_buffer_get_u16(target, value_ptr);
break;
case 1:
value = *value_ptr;
}
output_len += snprintf(output + output_len,
sizeof(output) - output_len,
value_fmt, value);
if ((i % line_modulo == line_modulo - 1) || (i == count - 1)) {
command_print(cmd_ctx, "%s", output);
output_len = 0;
}
}
}
COMMAND_HANDLER(handle_iod_command)
{
if (CMD_ARGC != 1)
return ERROR_COMMAND_SYNTAX_ERROR;
uint32_t address;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address);
if (address > 0xffff) {
LOG_ERROR("%s IA-32 I/O space is 2^16, 0x%08" PRIx32 " exceeds max", __func__, address);
return ERROR_COMMAND_SYNTAX_ERROR;
}
unsigned size = 0;
switch (CMD_NAME[2]) {
case 'w':
size = 4;
break;
case 'h':
size = 2;
break;
case 'b':
size = 1;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
unsigned count = 1;
uint8_t *buffer = calloc(count, size);
struct target *target = get_current_target(CMD_CTX);
int retval = x86_32_common_read_io(target, address, size, buffer);
if (ERROR_OK == retval)
handle_iod_output(CMD_CTX, target, address, size, count, buffer);
free(buffer);
return retval;
}
static int target_fill_io(struct target *target,
uint32_t address,
unsigned data_size,
/* value */
uint32_t b)
{
LOG_DEBUG("address=0x%08" PRIx32 ", data_size=%u, b=0x%08" PRIx32,
address, data_size, b);
uint8_t target_buf[data_size];
switch (data_size) {
case 4:
target_buffer_set_u32(target, target_buf, b);
break;
case 2:
target_buffer_set_u16(target, target_buf, b);
break;
case 1:
target_buf[0] = (b & 0x0ff);
break;
default:
exit(-1);
}
return x86_32_common_write_io(target, address, data_size, target_buf);
}
COMMAND_HANDLER(handle_iow_command)
{
if (CMD_ARGC != 2)
return ERROR_COMMAND_SYNTAX_ERROR;
uint32_t address;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address);
uint32_t value;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
struct target *target = get_current_target(CMD_CTX);
unsigned wordsize;
switch (CMD_NAME[2]) {
case 'w':
wordsize = 4;
break;
case 'h':
wordsize = 2;
break;
case 'b':
wordsize = 1;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
return target_fill_io(target, address, wordsize, value);
}
static const struct command_registration x86_32_exec_command_handlers[] = {
{
.name = "iww",
.mode = COMMAND_EXEC,
.handler = handle_iow_command,
.help = "write I/O port word",
.usage = "port data[word]",
},
{
.name = "iwh",
.mode = COMMAND_EXEC,
.handler = handle_iow_command,
.help = "write I/O port halfword",
.usage = "port data[halfword]",
},
{
.name = "iwb",
.mode = COMMAND_EXEC,
.handler = handle_iow_command,
.help = "write I/O port byte",
.usage = "port data[byte]",
},
{
.name = "idw",
.mode = COMMAND_EXEC,
.handler = handle_iod_command,
.help = "display I/O port word",
.usage = "port",
},
{
.name = "idh",
.mode = COMMAND_EXEC,
.handler = handle_iod_command,
.help = "display I/O port halfword",
.usage = "port",
},
{
.name = "idb",
.mode = COMMAND_EXEC,
.handler = handle_iod_command,
.help = "display I/O port byte",
.usage = "port",
},
COMMAND_REGISTRATION_DONE
};
const struct command_registration x86_32_command_handlers[] = {
{
.name = "x86_32",
.mode = COMMAND_ANY,
.help = "x86_32 target commands",
.usage = "",
.chain = x86_32_exec_command_handlers,
},
COMMAND_REGISTRATION_DONE
};
Reference in New Issue View Git Blame Copy Permalink