241a92d0f2
The capability to lock the debug interface on EFM32 controllers was lacking in OpenOCD. After receiving some pointers by zapb_ and PaulFertser on IRC (thanks guys!) I have added this capability. This works by writing the required bits in the debug lock word to '0'. Note: there is currently no way to re-enable the debug interface from OpenOCD as doing this requires specific pin wiggling that is currently not implemented yet. However: having the capability to lock the debug interface is useful when building a volume programming jig. You can flash the program code, verify and then lock the debug interface so that the device cannot be read when it is deployed in the field. Change-Id: If2d562dfdb4b95519785a4395f755d9ae3d0cf12 Signed-off-by: Lieven Hollevoet <hollie@lika.be> Reviewed-on: http://openocd.zylin.com/3389 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> |
||
|---|---|---|
| .. | ||
| manual | ||
| INSTALL.txt | ||
| Makefile.am | ||
| fdl.texi | ||
| openocd.1 | ||
| openocd.texi | ||