66 lines
2.0 KiB
INI
66 lines
2.0 KiB
INI
# c100 config
|
|
#
|
|
#jtag_nsrst_delay 5000
|
|
#jtag_ntrst_delay 3000
|
|
#reset_config none
|
|
reset_config trst_and_srst separate
|
|
#reset_config srst_only srst_pulls_trst
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME c100
|
|
}
|
|
|
|
if { [info exists ENDIAN] } {
|
|
set _ENDIAN $ENDIAN
|
|
} else {
|
|
set _ENDIAN little
|
|
}
|
|
|
|
if { [info exists CPUTAPID ] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
set _CPUTAPID 0x27b3645b
|
|
}
|
|
|
|
if { [info exists DSPTAPID ] } {
|
|
set _DSPTAPID $DSPTAPID
|
|
} else {
|
|
set _DSPTAPID 0x27b3645b
|
|
}
|
|
|
|
jtag newtap $_CHIPNAME dsp -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_DSPTAPID
|
|
|
|
|
|
# Per ARM: DDI0211J_arm1136_r1p5_trm.pdf - the ARM 1136 as a 5 bit IR register
|
|
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
|
|
|
|
# C100's ARAM 64k SRAM
|
|
$_TARGETNAME configure -work-area-phys 0x0a000000 -work-area-size 0x10000 -work-area-backup 0
|
|
|
|
|
|
proc power_restore {} { puts "Sensed power restore. No action." }
|
|
proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." }
|
|
|
|
|
|
# issue telnet: reset init
|
|
# issue gdb: monitor reset init
|
|
$_TARGETNAME configure -event reset-init {
|
|
# Force target into ARM state.
|
|
# soft_reset_halt # not implemented on ARM11
|
|
puts "Halting C100.CPU"
|
|
halt
|
|
}
|
|
|
|
$_TARGETNAME configure -event reset-deassert-post {
|
|
# Force target into ARM state.
|
|
# soft_reset_halt # not implemented on ARM11
|
|
puts "Detected SRSRT asserted on C100.CPU"
|
|
|
|
}
|
|
# Valid events: old-gdb_program_config, old-pre_resume, early-halted, halted, resumed, resume-start, resume-end, gdb-start, gdb-end, reset-start, reset-assert-pre, reset-assert-post, reset-deassert-pre, reset-deassert-post, reset-halt-pre, reset-halt-post, reset-wait-pre, reset-wait-post, reset-init, reset-end, examine-start, examine-end, debug-halted, debug-resumed, gdb-attach, gdb-detach, gdb-flash-write-start, gdb-flash-write-end, gdb-flash-erase-start, gdb-flash-erase-end, resume-start, resume-ok, or resume-end
|