tinyriscv-openocd/tcl
Moritz Fischer f21c12abec flash: stm32f2/f4/f7: Add One-Time-Porgrammable (OTP) support
The OTP is part of the flash memory. It has 512 (1024 for F7) bytes
and is organized in 16 sectors with 32 (64 for F7) bytes each.
The OTP is exposed as separate flash bank 1 and can be used
with the usual flash commands.

Writing the OTP can be done as follows:

> stm32f2x otp 1 enable
> flash write bank 1 foo.bin 0
> mdw 0x1fff7800 4
> verify_image foo.bin 0x1fff7800
> stm32f2x otp 1 disable

Note: This patch is largely a rebase/cleanup of a patch
from 2012 by Laurent Charpentier and he did most of the work.

No new Clang-Analyzer warnings.

Change-Id: I5e6371f6a7c7a9929c1d7907d6ba4724f9d20d97
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-on: http://openocd.zylin.com/829
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-02-27 00:16:50 +00:00
..
board flash/nor: flash driver and cfg for SAM E54, E53, E51 and D51 2019-02-05 17:45:18 +00:00
chip Fix a typo. 2013-07-07 13:00:59 +00:00
cpld xilinx-xc7: Add additional IDCODEs. 2018-10-27 14:37:43 +01:00
cpu/arm Move TCL script files -- Step 2 of 2: 2009-05-27 06:49:24 +00:00
fpga fpga/altera-10m50: add all device id 2018-07-31 18:56:14 +01:00
interface stlink: add support for STLINK-V3 2018-12-06 13:06:59 +00:00
target flash: stm32f2/f4/f7: Add One-Time-Porgrammable (OTP) support 2019-02-27 00:16:50 +00:00
test TCL scripts: replace "puts" with "echo" 2010-11-09 08:12:51 +01:00
tools tcl/board: add Linksys WAG200G config 2016-10-17 09:16:33 +01:00
bitsbytes.tcl TCL scripts: replace "puts" with "echo" 2010-11-09 08:12:51 +01:00
mem_helper.tcl mem_helper: add mrh command 2018-12-06 09:38:41 +00:00
memory.tcl target: add "phys" argument to mem2array, array2mem 2016-08-09 14:32:12 +01:00
mmr_helpers.tcl TCL scripts: replace "puts" with "echo" 2010-11-09 08:12:51 +01:00