58 lines
2.0 KiB
INI
58 lines
2.0 KiB
INI
# Atheros AR71xx MIPS 24Kc SoC.
|
|
# tested on PB44 refererence board
|
|
|
|
jtag_nsrst_delay 100
|
|
jtag_ntrst_delay 100
|
|
|
|
reset_config trst_and_srst
|
|
|
|
set CHIPNAME ar71xx
|
|
|
|
jtag newtap $CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id 1
|
|
|
|
set TARGETNAME [format "%s.cpu" $CHIPNAME]
|
|
target create $TARGETNAME mips_m4k -endian big -chain-position $TARGETNAME
|
|
|
|
$TARGETNAME configure -event reset-halt-post {
|
|
#setup PLL to lowest common denominator 300/300/150 setting
|
|
mww 0xb8050000 0x000f40a3 # reset val + CPU:3 DDR:3 AHB:0
|
|
mww 0xb8050000 0x800f40a3 # send to PLL
|
|
|
|
#next command will reset for PLL changes to take effect
|
|
mww 0xb8050008 3 # set reset_switch and clock_switch (resets SoC)
|
|
}
|
|
|
|
$TARGETNAME configure -event reset-init {
|
|
#complete pll initialization
|
|
mww 0xb8050000 0x800f0080 # set sw_update bit
|
|
mww 0xb8050008 0 # clear reset_switch bit
|
|
mww 0xb8050000 0x800f00e8 # clr pwrdwn & bypass
|
|
mww 0xb8050008 1 # set clock_switch bit
|
|
sleep 1 # wait for lock
|
|
|
|
# Setup DDR config and flash mapping
|
|
mww 0xb8000000 0xefbc8cd0 # DDR cfg cdl val (rst: 0x5bfc8d0)
|
|
mww 0xb8000004 0x8e7156a2 # DDR cfg2 cdl val (rst: 0x80d106a8)
|
|
|
|
mww 0xb8000010 8 # force precharge all banks
|
|
mww 0xb8000010 1 # force EMRS update cycle
|
|
mww 0xb800000c 0 # clr ext. mode register
|
|
mww 0xb8000010 2 # force auto refresh all banks
|
|
mww 0xb8000010 8 # force precharge all banks
|
|
mww 0xb8000008 0x31 # set DDR mode value CAS=3
|
|
mww 0xb8000010 1 # force EMRS update cycle
|
|
mww 0xb8000014 0x461b # DDR refresh value
|
|
mww 0xb8000018 0xffff # DDR Read Data This Cycle value (16bit: 0xffff)
|
|
mww 0xb800001c 0x7 # delay added to the DQS line (normal = 7)
|
|
mww 0xb8000020 0
|
|
mww 0xb8000024 0
|
|
mww 0xb8000028 0
|
|
}
|
|
|
|
# setup working area somewhere in RAM
|
|
$TARGETNAME configure -work-area-phys 0xa0600000 -work-area-size 0x20000
|
|
|
|
# serial SPI capable flash
|
|
# flash bank <driver> <base> <size> <chip_width> <bus_width>
|
|
|