38 lines
1.6 KiB
INI
38 lines
1.6 KiB
INI
# ixo-usb-jtag - Emulation of a Altera Bus Blaster I on a Cypress FX2 IC.
|
|
#
|
|
# The ixo-usb-jtag firmware can be loaded onto a bunch of different hardware
|
|
# including;
|
|
# * Xilinx USB Platform Cable
|
|
# * Many Digilent boards such as the Nexys, Nexys 2 and Atlys boards
|
|
# * Many fpga4fun.com boards from such as the Saxo and Xylo boards
|
|
# * The Numato Opsis
|
|
#
|
|
# Original version - http://www.ixo.de/info/usb_jtag/
|
|
# Updated version - http://ixo-jtag.sourceforge.net/
|
|
# Newest version - http://github.com/mithro/ixo-usb-jtag
|
|
#
|
|
# Procedure for using is;
|
|
# * Get the ixo-usb-jtag firmware for your hardware (or build it yourself).
|
|
# * Load the firmware using the fxload tool.
|
|
# * Use openocd.
|
|
#
|
|
# Unless you burn the firmware into the EEPROM on your device, power cycling
|
|
# will require you to reload the firmware using the fxload tool. This can be
|
|
# automated by using udev rules (which can be found in the firmware
|
|
# repository).
|
|
#
|
|
# Ubuntu packages built from mithro's version (with prebuilt firmware and udev
|
|
# rules) can be found at
|
|
# https://launchpad.net/~timvideos/+archive/ubuntu/fpga-support
|
|
#
|
|
# TODO: Refactor the usb_blaster driver to allow loading firmware using any low
|
|
# level driver. Loading firmware is currently only supported on the ublast2
|
|
# driver but ixo-usb-jtag requires the ftdi driver.
|
|
|
|
interface usb_blaster
|
|
usb_blaster_vid_pid 0x16C0 0x06AD
|
|
usb_blaster_device_desc "Van Ooijen Technische Informatica"
|
|
# ixo-usb-jtag is only compatible with the ublast1 protocol implemented via the
|
|
# ftdi modes, using ublast2 will cause openocd to hang.
|
|
usb_blaster_lowlevel_driver ftdi
|