tinyriscv-openocd/tcl/target/xilinx_zynqmp.cfg

104 lines
2.8 KiB
INI

#
# target configuration for
# Xilinx ZynqMP (UltraScale+ / A53)
#
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME uscale
}
#
# DAP tap (Quard core A53)
#
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
set _DAP_TAPID 0x5ba00477
}
jtag newtap $_CHIPNAME tap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.tap
#
# PS tap (UltraScale+)
#
if { [info exists PS_TAPID] } {
set _PS_TAPID $PS_TAPID
jtag newtap $_CHIPNAME ps -irlen 12 -ircapture 0x1 -irmask 0x03 -expected-id $_PS_TAPID
} else {
# FPGA Programmable logic. Values take from Table 39-1 in UG1085:
jtag newtap $_CHIPNAME ps -irlen 12 -ircapture 0x1 -irmask 0x03 -ignore-version \
-expected-id 0x04711093 \
-expected-id 0x04710093 \
-expected-id 0x04721093 \
-expected-id 0x04720093 \
-expected-id 0x04739093 \
-expected-id 0x04730093 \
-expected-id 0x04738093 \
-expected-id 0x04740093 \
-expected-id 0x04750093 \
-expected-id 0x04759093 \
-expected-id 0x04758093
}
set jtag_configured 0
jtag configure $_CHIPNAME.ps -event setup {
global _CHIPNAME
global jtag_configured
if { $jtag_configured == 0 } {
# add the DAP tap to the chain
# See https://forums.xilinx.com/t5/UltraScale-Architecture/JTAG-Chain-Configuration-for-Zynq-UltraScale-MPSoC/td-p/758924
irscan $_CHIPNAME.ps 0x824
drscan $_CHIPNAME.ps 32 0x00000003
runtest 100
# setup event will be re-entered through jtag arp_init
# break the recursion
set jtag_configured 1
# re-initialized the jtag chain
jtag arp_init
}
}
set _TARGETNAME $_CHIPNAME.a53
set _CTINAME $_CHIPNAME.cti
set _smp_command ""
set DBGBASE {0x80410000 0x80510000 0x80610000 0x80710000}
set CTIBASE {0x80420000 0x80520000 0x80620000 0x80720000}
set _cores 4
for { set _core 0 } { $_core < $_cores } { incr _core } {
cti create $_CTINAME.$_core -dap $_CHIPNAME.dap -ap-num 1 \
-ctibase [lindex $CTIBASE $_core]
set _command "target create $_TARGETNAME.$_core aarch64 -dap $_CHIPNAME.dap \
-dbgbase [lindex $DBGBASE $_core] -cti $_CTINAME.$_core"
if { $_core != 0 } {
# non-boot core examination may fail
set _command "$_command -defer-examine"
set _smp_command "$_smp_command $_TARGETNAME.$_core"
} else {
# uncomment when "hawt" rtos is merged
#set _command "$_command -rtos hawt"
set _smp_command "target smp $_TARGETNAME.$_core"
}
eval $_command
}
eval $_smp_command
targets $_TARGETNAME.0
proc core_up { args } {
global _TARGETNAME
foreach { core } [set args] {
$_TARGETNAME.$core arp_examine
}
}