tinyriscv-openocd/tcl/chip/atmel/at91/rtt.tcl

57 lines
1.4 KiB
Tcl

set RTTC_RTMR [expr $AT91C_BASE_RTTC + 0x00]
set RTTC_RTAR [expr $AT91C_BASE_RTTC + 0x04]
set RTTC_RTVR [expr $AT91C_BASE_RTTC + 0x08]
set RTTC_RTSR [expr $AT91C_BASE_RTTC + 0x0c]
global RTTC_RTMR
global RTTC_RTAR
global RTTC_RTVR
global RTTC_RTSR
proc show_RTTC_RTMR_helper { NAME ADDR VAL } {
set rtpres [expr $VAL & 0x0ffff]
global BIT16 BIT17
if { $rtpres == 0 } {
set rtpres 65536;
}
global AT91C_SLOWOSC_FREQ
# Nasty hack, make this a float by tacking a .0 on the end
# otherwise, jim makes the value an integer
set f [expr $AT91C_SLOWOSC_FREQ.0 / $rtpres.0]
echo [format "\tPrescale value: 0x%04x (%5d) => %f Hz" $rtpres $rtpres $f]
if { $VAL & $BIT16 } {
echo "\tBit16 -> Alarm IRQ Enabled"
} else {
echo "\tBit16 -> Alarm IRQ Disabled"
}
if { $VAL & $BIT17 } {
echo "\tBit17 -> RTC Inc IRQ Enabled"
} else {
echo "\tBit17 -> RTC Inc IRQ Disabled"
}
# Bit 18 is write only.
}
proc show_RTTC_RTSR_helper { NAME ADDR VAL } {
global BIT0 BIT1
if { $VAL & $BIT0 } {
echo "\tBit0 -> ALARM PENDING"
} else {
echo "\tBit0 -> alarm not pending"
}
if { $VAL & $BIT1 } {
echo "\tBit0 -> RTINC PENDING"
} else {
echo "\tBit0 -> rtinc not pending"
}
}
proc show_RTTC { } {
show_mmr32_reg RTTC_RTMR
show_mmr32_reg RTTC_RTAR
show_mmr32_reg RTTC_RTVR
show_mmr32_reg RTTC_RTSR
}