tinyriscv-openocd/tcl/target/psoc4.cfg

217 lines
6.0 KiB
INI

# script for Cypress PSoC 4 devices
#
# PSoC 4 devices support SWD transports only.
#
source [find target/swj-dp.tcl]
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME psoc4
}
# Work-area is a space in RAM used for flash programming
# By default use 4kB
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x1000
}
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x0bb11477
}
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME psoc4 0 0 0 0 $_TARGETNAME
adapter_khz 1500
# Reset, bloody PSoC 4 reset
#
# 1) XRES (nSRST) resets also SWD DP so SWD line reset and DP reinit is needed.
# High level adapter stops working after SRST and needs OpenOCD restart.
# If your hw does not use SRST for other circuits, use sysresetreq instead
#
# 2) PSoC 4 executes initialization code from system ROM after reset.
# This code subsequently jumps to user flash reset vector address.
# Unfortunately the system ROM code is protected from reading and debugging.
# Protection breaks vector catch VC_CORERESET used for "reset halt" by cortex_m.
#
# Cypress uses TEST_MODE flag to loop CPU in system ROM before executing code
# from user flash. Programming specifications states that TEST_MODE flag must be
# set in time frame 400 usec delayed about 1 msec from reset.
#
# OpenOCD have no standard way how to set TEST_MODE in specified time frame.
# As a workaround the TEST_MODE flag is set before reset instead.
# It worked for the oldest family PSoC4100/4200 even though it is not guaranteed
# by specification.
#
# Newer families like PSoC 4000, 4100M, 4200M, 4100L, 4200L and PSoC 4 BLE
# clear TEST_MODE flag during device reset so workaround is not possible.
# Use a KitProg adapter for theese devices or "reset halt" will not stop
# before executing user code.
#
# 3) SWD cannot be connected during system initialization after reset.
# This might be a reason for unconnecting ST-Link v2 when deasserting reset.
# As a workaround arp_reset deassert is not called for hla
if {![using_hla]} {
# if srst is not fitted use SYSRESETREQ to
# perform a soft reset
cortex_m reset_config sysresetreq
}
proc psoc4_get_family_id {} {
set err [catch "mem2array romtable_pid 32 0xF0000FE0 3"]
if { $err } {
return 0
}
if { [expr $romtable_pid(0) & 0xffffff00 ]
|| [expr $romtable_pid(1) & 0xffffff00 ]
|| [expr $romtable_pid(2) & 0xffffff00 ] } {
echo "Unexpected data in ROMTABLE"
return 0
}
set designer_id [expr (( $romtable_pid(1) & 0xf0 ) >> 4) | (( $romtable_pid(2) & 0xf ) << 4 ) ]
if { $designer_id != 0xb4 } {
echo [format "ROMTABLE Designer ID 0x%02x is not Cypress" $designer_id]
return 0
}
set family_id [expr ( $romtable_pid(0) & 0xff ) | (( $romtable_pid(1) & 0xf ) << 8 ) ]
return $family_id
}
proc ocd_process_reset_inner { MODE } {
global PSOC4_USE_ACQUIRE PSOC4_TEST_MODE_WORKAROUND
global _TARGETNAME
if { 0 != [string compare $_TARGETNAME [target names]] } {
return -code error "PSoC 4 reset can handle only one $_TARGETNAME target";
}
set t $_TARGETNAME
# If this target must be halted...
set halt -1
if { 0 == [string compare $MODE halt] } {
set halt 1
}
if { 0 == [string compare $MODE init] } {
set halt 1;
}
if { 0 == [string compare $MODE run ] } {
set halt 0;
}
if { $halt < 0 } {
return -code error "Invalid mode: $MODE, must be one of: halt, init, or run";
}
if { ! [info exists PSOC4_USE_ACQUIRE] } {
if { 0 == [string compare [adapter_name] kitprog ] } {
set PSOC4_USE_ACQUIRE 1
} else {
set PSOC4_USE_ACQUIRE 0
}
}
if { $PSOC4_USE_ACQUIRE } {
set PSOC4_TEST_MODE_WORKAROUND 0
} elseif { ! [info exists PSOC4_TEST_MODE_WORKAROUND] } {
if { [psoc4_get_family_id] == 0x93 } {
set PSOC4_TEST_MODE_WORKAROUND 1
} else {
set PSOC4_TEST_MODE_WORKAROUND 0
}
}
#$t invoke-event reset-start
$t invoke-event reset-assert-pre
if { $halt && $PSOC4_USE_ACQUIRE } {
catch { [adapter_name] acquire_psoc }
$t arp_examine
} else {
if { $PSOC4_TEST_MODE_WORKAROUND } {
set TEST_MODE 0x40030014
if { $halt == 1 } {
catch { mww $TEST_MODE 0x80000000 }
} else {
catch { mww $TEST_MODE 0 }
}
}
$t arp_reset assert 0
}
$t invoke-event reset-assert-post
$t invoke-event reset-deassert-pre
if {![using_hla]} { # workaround ST-Link v2 fails and forcing reconnect
$t arp_reset deassert 0
}
$t invoke-event reset-deassert-post
# Pass 1 - Now wait for any halt (requested as part of reset
# assert/deassert) to happen. Ideally it takes effect without
# first executing any instructions.
if { $halt } {
# Now PSoC CPU should loop in system ROM
$t arp_waitstate running 200
$t arp_halt
# Catch, but ignore any errors.
catch { $t arp_waitstate halted 1000 }
# Did we succeed?
set s [$t curstate]
if { 0 != [string compare $s "halted" ] } {
return -code error [format "TARGET: %s - Not halted" $t]
}
# Check if PSoC CPU is stopped in system ROM
set pc [reg pc]
regsub {pc[^:]*: } $pc "" pc
if { $pc < 0x10000000 || $pc > 0x1000ffff } {
set hint ""
set family_id [psoc4_get_family_id]
if { $family_id == 0x93 } {
set hint ", use 'reset_config none'"
} elseif { $family_id > 0x93 } {
set hint ", use a KitProg adapter"
}
return -code error [format "TARGET: %s - Not halted in system ROM%s" $t $hint]
}
# Set registers to reset vector values
mem2array value 32 0 2
reg pc [expr $value(1) & 0xfffffffe ]
reg msp $value(0)
if { $PSOC4_TEST_MODE_WORKAROUND } {
catch { mww $TEST_MODE 0 }
}
}
#Pass 2 - if needed "init"
if { 0 == [string compare init $MODE] } {
set err [catch "$t arp_waitstate halted 5000"]
# Did it halt?
if { $err == 0 } {
$t invoke-event reset-init
}
}
$t invoke-event reset-end
}