61 lines
1.7 KiB
INI
61 lines
1.7 KiB
INI
# script for Nuvoton MuMicro Cortex-M0 Series
|
|
|
|
# Adapt based on what transport is active.
|
|
source [find target/swj-dp.tcl]
|
|
|
|
# Set Chipname
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME NuMicro
|
|
}
|
|
|
|
# SWD DP-ID Nuvoton NuMicro Cortex-M0 has SWD Transport only.
|
|
if { [info exists CPUDAPID] } {
|
|
set _CPUDAPID $CPUDAPID
|
|
} else {
|
|
set _CPUDAPID 0x0BB11477
|
|
}
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
# By default use 2kB
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x800
|
|
}
|
|
|
|
|
|
# Debug Adapter Target Settings
|
|
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUDAPID
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
# flash bank <name> numicro <base> <size(autodetect,set to 0)> 0 0 <target#>
|
|
#set _FLASHNAME $_CHIPNAME.flash
|
|
#flash bank $_FLASHNAME numicro 0 $_FLASHSIZE 0 0 $_TARGETNAME
|
|
# flash size will be probed
|
|
set _FLASHNAME $_CHIPNAME.flash_aprom
|
|
flash bank $_FLASHNAME numicro 0x00000000 0 0 0 $_TARGETNAME
|
|
set _FLASHNAME $_CHIPNAME.flash_data
|
|
flash bank $_FLASHNAME numicro 0x0001F000 0 0 0 $_TARGETNAME
|
|
set _FLASHNAME $_CHIPNAME.flash_ldrom
|
|
flash bank $_FLASHNAME numicro 0x00100000 0 0 0 $_TARGETNAME
|
|
set _FLASHNAME $_CHIPNAME.flash_config
|
|
flash bank $_FLASHNAME numicro 0x00300000 0 0 0 $_TARGETNAME
|
|
|
|
# set default SWCLK frequency
|
|
adapter_khz 1000
|
|
|
|
# set default srst setting "none"
|
|
reset_config none
|
|
|
|
# HLA doesn't have cortex_m commands
|
|
if {![using_hla]} {
|
|
# if srst is not fitted use SYSRESETREQ to
|
|
# perform a soft reset
|
|
cortex_m reset_config sysresetreq
|
|
}
|