72 lines
1.9 KiB
INI
72 lines
1.9 KiB
INI
#
|
|
# Configuration script for Arm CoreLink SSE-200 Subsystem based IoT SoCs.
|
|
#
|
|
|
|
global TARGET
|
|
set TARGET $_CHIPNAME
|
|
|
|
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
|
|
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
|
|
|
#
|
|
# SRAM on ARM CoreLink SSE-200 can be 4 banks of 8/16/32/64 KB
|
|
# We will configure work area assuming 8-KB bank size in SRAM bank 1.
|
|
# Also SRAM start addresses defaults to secure mode alias.
|
|
# These values can be overridden as per board configuration
|
|
#
|
|
|
|
global _WORKAREASIZE_CPU0
|
|
if { [info exists WORKAREASIZE_CPU0] } {
|
|
set _WORKAREASIZE_CPU0 $WORKAREASIZE_CPU0
|
|
} else {
|
|
set _WORKAREASIZE_CPU0 0x1000
|
|
}
|
|
|
|
global _WORKAREAADDR_CPU0
|
|
if { [info exists WORKAREAADDR_CPU0] } {
|
|
set _WORKAREAADDR_CPU0 $WORKAREAADDR_CPU0
|
|
} else {
|
|
set _WORKAREAADDR_CPU0 0x30008000
|
|
}
|
|
|
|
#
|
|
# Target configuration for Cortex M33 Core 0 on ARM CoreLink SSE-200
|
|
# Core 0 is the boot core and will always be configured.
|
|
#
|
|
|
|
target create ${TARGET}.CPU0 cortex_m -dap $_CHIPNAME.dap -ap-num 1 -coreid 0
|
|
|
|
${TARGET}.CPU0 configure -work-area-phys $_WORKAREAADDR_CPU0 -work-area-size $_WORKAREASIZE_CPU0 -work-area-backup 0
|
|
|
|
${TARGET}.CPU0 cortex_m reset_config sysresetreq
|
|
|
|
#
|
|
# Target configuration for Cortex M33 Core 1 on ARM CoreLink SSE-200
|
|
# Core 1 is optional and locked at boot until core 0 unlocks it.
|
|
#
|
|
|
|
if { $_ENABLE_CPU1 } {
|
|
global _WORKAREASIZE_CPU1
|
|
if { [info exists WORKAREASIZE_CPU1] } {
|
|
set _WORKAREASIZE_CPU1 $WORKAREASIZE_CPU1
|
|
} else {
|
|
set _WORKAREASIZE_CPU1 0x1000
|
|
}
|
|
|
|
global _WORKAREAADDR_CPU1
|
|
if { [info exists WORKAREAADDR_CPU1] } {
|
|
set _WORKAREAADDR_CPU1 $WORKAREAADDR_CPU1
|
|
} else {
|
|
set _WORKAREAADDR_CPU1 0x30009000
|
|
}
|
|
|
|
target create ${TARGET}.CPU1 cortex_m -dap $_CHIPNAME.dap -ap-num 2 -coreid 1
|
|
|
|
${TARGET}.CPU1 configure -work-area-phys $_WORKAREAADDR_CPU1 -work-area-size $_WORKAREASIZE_CPU1 -work-area-backup 0
|
|
|
|
${TARGET}.CPU1 cortex_m reset_config vectreset
|
|
}
|
|
|
|
# Make sure the default target is the boot core
|
|
targets ${TARGET}.CPU0
|