tinyriscv-openocd/tcl/target/lpc4350.cfg

62 lines
1.3 KiB
INI

source [find target/swj-dp.tcl]
adapter_khz 500
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME lpc4350
}
#
# M4 JTAG mode TAP
#
if { [info exists M4_JTAG_TAPID] } {
set _M4_JTAG_TAPID $M4_JTAG_TAPID
} else {
set _M4_JTAG_TAPID 0x4ba00477
}
#
# M4 SWD mode TAP
#
if { [info exists M4_SWD_TAPID] } {
set _M4_SWD_TAPID $M4_SWD_TAPID
} else {
set _M4_SWD_TAPID 0x2ba01477
}
if { [using_jtag] } {
set _M4_TAPID $_M4_JTAG_TAPID
} {
set _M4_TAPID $_M4_SWD_TAPID
}
#
# M0 TAP
#
if { [info exists M0_JTAG_TAPID] } {
set _M0_JTAG_TAPID $M0_JTAG_TAPID
} else {
set _M0_JTAG_TAPID 0x0ba01477
}
swj_newdap $_CHIPNAME m4 -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_M4_TAPID
target create $_CHIPNAME.m4 cortex_m -chain-position $_CHIPNAME.m4
if { [using_jtag] } {
swj_newdap $_CHIPNAME m0 -irlen 4 -ircapture 0x1 -irmask 0xf \
-expected-id $_M0_JTAG_TAPID
target create $_CHIPNAME.m0 cortex_m -chain-position $_CHIPNAME.m0
}
if {![using_hla]} {
# on this CPU we should use VECTRESET to perform a soft reset and
# manually reset the periphery
# SRST or SYSRESETREQ disable the debug interface for the time of
# the reset and will not fit our requirements for a consistent debug
# session
cortex_m reset_config vectreset
}