tinyriscv-openocd/contrib/loaders/flash/at91sam7x/samregs.h

84 lines
4.6 KiB
C

/*
* Copyright (C) 2005-2006 by egnite Software GmbH. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holders nor the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY EGNITE SOFTWARE GMBH AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL EGNITE
* SOFTWARE GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* For additional information see http://www.ethernut.de/
*/
#ifndef samregsH
#define samregsH
/*
* Register definitions below copied from NutOS
*/
#define DBGU_BASE 0xFFFFF200 /*!< \brief DBGU base address. */
#define DBGU_CIDR_OFF 0x00000040 /*!< \brief DBGU chip ID register offset. */
#define DBGU_CIDR (DBGU_BASE + DBGU_CIDR_OFF) /*!< \brief DBGU chip ID register. */
#define MC_BASE 0xFFFFFF00 /*!< \brief Memory controller base. */
#define MC_FMR_OFF 0x00000060 /*!< \brief MC flash mode register offset. */
#define MC_FMR (MC_BASE + MC_FMR_OFF) /*!< \brief MC flash mode register address. */
#define MC_FRDY 0x00000001 /*!< \brief Flash ready. */
#define MC_LOCKE 0x00000004 /*!< \brief Lock error. */
#define MC_PROGE 0x00000008 /*!< \brief Programming error. */
#define MC_NEBP 0x00000080 /*!< \brief No erase before programming. */
#define MC_FWS_MASK 0x00000300 /*!< \brief Flash wait state mask. */
#define MC_FWS_1R2W 0x00000000 /*!< \brief 1 cycle for read, 2 for write operations. */
#define MC_FWS_2R3W 0x00000100 /*!< \brief 2 cycles for read, 3 for write operations. */
#define MC_FWS_3R4W 0x00000200 /*!< \brief 3 cycles for read, 4 for write operations. */
#define MC_FWS_4R4W 0x00000300 /*!< \brief 4 cycles for read and write operations. */
#define MC_FMCN_MASK 0x00FF0000 /*!< \brief Flash microsecond cycle number mask. */
#define MC_FCR_OFF 0x00000064 /*!< \brief MC flash command register offset. */
#define MC_FCR (MC_BASE + MC_FCR_OFF) /*!< \brief MC flash command register address. */
#define MC_FCMD_MASK 0x0000000F /*!< \brief Flash command mask. */
#define MC_FCMD_NOP 0x00000000 /*!< \brief No command. */
#define MC_FCMD_WP 0x00000001 /*!< \brief Write page. */
#define MC_FCMD_SLB 0x00000002 /*!< \brief Set lock bit. */
#define MC_FCMD_WPL 0x00000003 /*!< \brief Write page and lock. */
#define MC_FCMD_CLB 0x00000004 /*!< \brief Clear lock bit. */
#define MC_FCMD_EA 0x00000008 /*!< \brief Erase all. */
#define MC_FCMD_SGPB 0x0000000B /*!< \brief Set general purpose NVM bit. */
#define MC_FCMD_CGPB 0x0000000D /*!< \brief Clear general purpose NVM bit. */
#define MC_FCMD_SSB 0x0000000F /*!< \brief Set security bit. */
#define MC_PAGEN_MASK 0x0003FF00 /*!< \brief Page number mask. */
#define MC_KEY 0x5A000000 /*!< \brief Writing protect key. */
#define MC_FSR_OFF 0x00000068 /*!< \brief MC flash status register offset. */
#define MC_FSR (MC_BASE + MC_FSR_OFF) /*!< \brief MC flash status register address. */
#define MC_SECURITY 0x00000010 /*!< \brief Security bit status. */
#endif