Commit Graph

250 Commits (fd9f27bfac1dd9a661913c31774edf4f8cd0798c)

Author SHA1 Message Date
Nemui Trinomius a0e37fe2c0 cfg: Added Nucleo-F334R8 board config.
It supports STLink/V2-1.

Change-Id: I0a8c01247a7a0165321818ca222479e3ae67ce5c
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/2175
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-19 21:59:30 +00:00
Marco Cruz bbc2f13f33 tcl/board: add Atmel SAM4E-EK
Change-Id: I07d7e0528ed4e88b070ba4e7598a193ec8e9e37d
Signed-off-by: Marco Cruz <marco.caratuva@gmail.com>
Reviewed-on: http://openocd.zylin.com/2158
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-18 20:27:10 +00:00
Paul Fertser 76a765adbc tcl: add ASUS RT-N66U config
CFI flashing verified with real hardware. RAM configuration wasn't
attempted.

Change-Id: I9185ab71430d799793befef708a15f62edba1663
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2153
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01 18:27:09 +00:00
Ash Charles 66c6665288 Add support for Gumstix AeroCore device
The Gumstix AeroCore board [1] contains a STM32F427 microcontroller.
Schematics for this board will also be made available [2].
The JTAG interface for this chip can be accessed via a USB connection
provided by an FTDI chip (0403:6011).

[1] https://store.gumstix.com/index.php/products/585/
[2] https://pubs.gumstix.com/boards/AEROCORE

Change-Id: I0bf3bb525f51528bedd807b1f7210b09ef2e1015
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Reviewed-on: http://openocd.zylin.com/2117
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-05 20:14:30 +00:00
Lee Bowyer 47830f0ebf tcl: bcm6348 target config, BT HomeHub v1 board config
Also add the board to the firmware recovery script.

Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0
Signed-off-by: Lee Bowyer <lee@sodnpoo.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2097
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14 18:15:24 +00:00
Franck Jullien 3c954fbd89 cfg: or1k_generic: allow TAP_TYPE override
This patch allows users to specify TAP_TYPE from
the command line when using or1k_generic.cfg.

Change-Id: I9f4b7d8e4867658fa34bb4e92fc3a5f25227df11
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/2056
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29 07:19:09 +00:00
Tim Sander 91a36fcf0a tcl: add Zynq-7000 target and Zedboard board configs
Change-Id: Ia7f2a57d1b32dda9936ad87e22635f7749ff3ce1
Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2061
Tested-by: jenkins
2014-03-29 07:16:00 +00:00
Felipe Balbi 058163e32e cfg: add TI am43xx devices
This adds support for the am43xx SoC and the AM437x GP EVM and AM438x
ePOS EVM.

Change-Id: I09cbb09072f38e0e08fdd520dedb6e67d45056be
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2047
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29 07:00:22 +00:00
Jens Hoffmann 075c3f8fe2 cfg: Added st nucleo board configs.
This patch adds board configs for Nucleo FXXX boards.

Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8
Signed-off-by: Jens Hoffmann <jehoffma@gmail.com>
Reviewed-on: http://openocd.zylin.com/2022
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17 17:05:37 +00:00
Paul Fertser ae806d8f4e tcl/board: add config for DP Bus Blaster reconfiguration
Reported and tested by Gracana on IRC.

Change-Id: If0524d2d627d566e8b5e1d00784dd7556f44b125
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2036
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-17 12:44:19 +00:00
Tim Kryger f91390f538 bcm281xx: Add bcm281xx SoC and bcm28155_ap board
Add support for Broadcom's dual A9 mobile SoC and its reference board.

Change-Id: Ia145b120043bddc89c44726066023154ae390788
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-on: http://openocd.zylin.com/1926
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-09 22:33:32 +00:00
Tom Rini 36cbcb0cc9 cfg: Switch ti_beaglebone to new ftdi interface
Tested on Beagelbone White.

Change-Id: I544d7c1ba21a6bd594c0a1c4a9611639fa3c320d
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2017
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-07 19:42:19 +00:00
Andrey Yurovsky 8e44a9663d Add support for the Atmel SAMG53
flash: at91sam4: add support for the SAMG53 family (this also covers the
SAMG51).  The SAMG5x parts have an EEFC (enhanced embedded flash controller)
which seems to be identical to the EFC that the sam4 driver supports.

Add a script for the Xplained Pro G53 board, this has the onboard CMSIS-DAP
debugger and a SAMG53N19.  Tested on this board and chip combination.

Change-Id: I12af50402cd2069b3c7380d92e6fe54816d6c045
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1974
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-04 20:18:37 +00:00
Adrian Burns 1338cf60b9 quark_x10xx: add new target quark_x10xx
Intel Quark X10xx SoC debug support added
Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC
Generic x86 32-bit code is in x86_32_common.c/h

Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368
Signed-off-by: adrian.burns@intel.com
Reviewed-on: http://openocd.zylin.com/1829
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-11 13:07:29 +00:00
Spencer Oliver e18c958e82 cfg: add Freescale FRDM-KL46Z Board
Change-Id: Ib585728f13a380eeeb2ada095f3e1a1c2aaf44cb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1866
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-20 13:26:50 +00:00
Andrey Yurovsky 32eea3f68e Atmel samd: add support for SAMD21
Tested with SAMD21J18A on the SAMD21 Xplained Pro board.

Change-Id: Ice9ebcd229ed038b3193baf92d910f9256d7ce91
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1873
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-15 11:38:25 +00:00
Spencer Oliver 67f664a068 cfg: add initial Atmel xplained kit support
These kits feature a CMSIS-DAP compliant debugger and so have been added
as part of the pending support.

Currently the flash drivers for the L8 and D20 are wip.

One issue this implementation of CMSIS-DAP raised is that it supports
512byte HID reports, however using the current HIDAPI we have no cross platform
way of querying this info. Long term we plan to add this support to HIDAPI.

Change-Id: Ie8b7c871f58a099d963cd71a9f8a0105a38784e9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1625
Tested-by: jenkins
2014-01-09 15:22:56 +00:00
Spencer Oliver acc4bb83fd cfg: add stm32 cmsis-dap compliant config
Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1543
Tested-by: jenkins
2014-01-09 15:22:42 +00:00
Spencer Oliver 4dc8cd201c cmsis-dap: add initial cmsis-dap support
This is based on work from:
https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap

Main changes include moving over to using HIDAPI rather than libusb-1.0
and cleaning up to merge into master. Support for reset using srst has
also been added.

It has been tested on all the mbed boards as well as the Freedom board
from Freescale. These boards only implement SWD mode, however JTAG mode
has been tested with a Keil ULINK2 and a stm32 target - but requires a lot
more work.

Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1542
Tested-by: jenkins
2014-01-09 15:20:51 +00:00
Paul Fertser 416e79e24a tcl/netgear-dg834v3.cfg: add to easy firmware recovery list
Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1851
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08 22:18:39 +00:00
Paul Fertser 302a3a8fed tcl/board: add Linksys WRT54GL v1.1 board config
Tested flashing a real v1.1 device.

Change-Id: Ie0d202b9fded8b92e731d93e0ef17be415a75fc8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1852
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08 22:18:25 +00:00
Paul Fertser faedb14772 tcl: add bcm47xx config and Asus RT-N16 board using it
This adds the bcm47xx config with the special undocumented trick to
put it into standard EJTAG mode from the mystic "LV mode".

The RAM setup is not done as it would require considerable efforts
without much practical gain.

The only issue I noticed so far is that "reset" doesn't actually reset
the chip.

Unfortunately, it's unclear how to make it work properly with SRST as
OpenOCD asserts it in MIPS-specific code so the device will enter LV
mode again but the LV tap is already disabled by that time, so it's
not possible to send the magic command again.

Anyway, this config is more than enough to "recover" any RT-N16
provided the hardware is not damaged.

Change-Id: I0894e339763e6d20d1c93341c597382b479d039b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1849
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08 22:18:18 +00:00
Sergio Chico 93a3a82e49 topic: Support for the Xilinx BSCAN_* Virtual JTAG in Openrisc
This add support to the Xilinx BSCAN_* virtual JTAG interface.
This is the Xilinx equivalent of the Altera sld_virtual_jtag interface,
it allows a user to connect to the debug unit through the main
FPGA JTAG connection.

Change-Id: Ia438e910650cff9cbc8f810b719fc1d5de5a8188
Signed-off-by: Sergio Chico <sergio.chico@gmail.com>
Reviewed-on: http://openocd.zylin.com/1806
Tested-by: jenkins
Reviewed-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14 21:53:16 +00:00
Andrey Yurovsky 6accbb8baa add TI TMS570 support scripts
Add support for the TMS570 Cortex-R4 MCU from TI and their USB stick
development kit, TMDX570LS31USB.  Tested attaching, reset/halt/run, and
reading and writing memory and registers.

Change-Id: I12d779cef0c2b834f9bcf722307f35677cc4bd8f
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1788
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06 13:06:41 +00:00
Spencer Oliver 8994b075fc cfg: add STM32F429 discovery board config
Change-Id: I4ee7a8185a02fac9d1f6079ab34d6a9f7047193a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1691
Tested-by: jenkins
2013-10-15 20:42:00 +00:00
Paul Fertser 24099b4c14 board: add TM4C123G LaunchPad config
Almost the same as the LM4F120 LaunchPad but the chip is using the new
naming scheme (Tiva C series), supports USB OTG and has some new PWM
hardware blocks.

Change-Id: I6a7b2df76768766471f366cddaf64df3cc63f5f2
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1647
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-03 09:26:08 +00:00
Franck Jullien 4e79b48e2c Add new target type: OpenRISC
Add support for OpenRISC target. This implementation
supports the adv_debug_sys debug unit core. The mohor
dbg_if is not supported. Support for mohor TAP core
and Altera Virtual JTAG core are also provided.

Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1547
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-26 09:52:56 +00:00
Brad Riensche 02826721d0 Add tcl configurations for Altera Soc devices
This commit adds two tcl configuration files, one for the Altera
Cyclone V SoC series, and one for the SoCkit development board.
The board configuration is able to halt and resume the cpu cores,
and dump register contents etc.  It has not been fully tested, however.

Change-Id: Id3f18c3408975cf986a5f5aec410b5b13240c35e
Signed-off-by: Brad Riensche <brad.riensche@gmail.com>
Reviewed-on: http://openocd.zylin.com/1494
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15 14:50:22 +00:00
Marek Vasut e608ced330 ftdi/board: Add support for DENX M53EVK
Add support for DENX M53EVK board and it's integrated on-board
JTAG adapter using FT2232H.

Change-Id: I022dcafa7799bb84a7873ba67ed82f1e49094320
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/1461
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-15 10:02:37 +00:00
Marek Vasut 7ccc511088 target: Pull out the jtag_rtck from iMX5x files
Pull the jtag_rtck setting from imx51.cfg and imx53.cfg . Since
not all boards using these CPUs do support RTCK signal, move the
configuration of RTCK into board files.

Change-Id: I632c5d38e00ada8779a451cd26428fd122452001
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/1460
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-15 10:02:32 +00:00
Hsiangkai Wang cf8a3c3d70 nds32: add new target type nds32_v2, nds32_v3, nds32_v3m
Add target code for Andes targets.

Change-Id: Ibf0e1b61b06127ca7d9ed502d98d7e2aeebbbe82
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1259
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05 19:27:35 +00:00
Spencer Oliver d9ba56c295 target: rename cortex_a8 to cortex_a
Rename cortex_a8 target to use a more correct cortex_a name.
This also adds a deprecated_name var so that older scripts issue a warning
to update the target name.

cfg files have also been updated to the new target name.

Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1130
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28 08:56:04 +00:00
Spencer Oliver 1fd8ac0ee6 cfg: add Netgear DG834v3 configuration
Change-Id: I3f4880d8b07b9623544b94d316b37e6d0ae97020
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1189
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-06 21:57:29 +00:00
Spencer Oliver 80649fc3d5 cfg: increase stm32l-discovery working area
This part has 16k ram so make it all available.

Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1006
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30 11:35:16 +00:00
Spencer Oliver adb8ec32dc icdi: add TI icdi interface
This is the new proprietary interface replacing the older FTDI based adapters.
It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad.

Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/922
Tested-by: jenkins
2012-12-23 21:46:20 +00:00
Gianluca Renzi 051ec13abc Generic LPC1850 board w/ SPIFI flash.
This config file is intended as an example of how to
use the lpcspifi flash driver, but it should be functional
for most LPC1850 boards utilizing SPIFI flash.

Change-Id: I855854282336701fd210134497ce014017f3aaec
Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it>
Reviewed-on: http://openocd.zylin.com/929
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06 14:34:16 +00:00
Spencer Oliver 8cbcd56c0e cfg: update ti/stellaris url's
Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/879
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 21:59:48 +00:00
Spencer Oliver ebece4a981 cfg: add ti ek-lm3s9d92 config
Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/853
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:34:54 +00:00
Spencer Oliver a046475f03 cfg: add ti ek-lm3s8962 config
Change-Id: I753cec80a904130088b00b3f81b6dd61808662d6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/852
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:34:41 +00:00
Spencer Oliver 2076ba093d cfg: add STM32F3-DISCOVERY board support
Change-Id: I4a02e0504fc04ffc1238d9bb77ec05c1f781e7e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/810
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-10-02 11:27:59 +00:00
George Harris 516719b6b8 Added SPIFI flash driver, algorithms, and docs
Added a flash driver designed to allow program/erase of
memory-mapped SPI flash chips for LPC43xx/LPC18xx family
micros. This driver includes three algorithms - erase,
write, and SPIFI peripheral initialization (to allow
memory-mapped access after a reset). The driver has been
added to the flash driver table (drivers.c), and the
OpenOCD documentation has been updated to include the flash
driver configuration command.

Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514
Signed-off-by: George Harris <george@luminairecoffee.com>
Reviewed-on: http://openocd.zylin.com/783
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26 16:17:42 +00:00
Joerg Fischer 8fe2bed92c cfg: Add Hitex LPC1768-Stick using ftdi driver
Add cfg files for Hitex LPC1768 Stick
Website: http://www.hitex.com/?id=1602

This board has a FTDI2232D as JTAG interface, using the
same layout as the Hitex STM32-PerformanceStick but with
different USB PID.

Main MCU is a LPC1768 from NXP.

The interface config uses the ftdi driver instead of ft2232.
The corresponding ft2232 layout would be "stm32stick".

Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Reviewed-on: http://openocd.zylin.com/763
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01 21:12:27 +00:00
Tom Rini 5e4ee571cc board: Add TI AM335x Evaluation Module
This patch adds the TI AM335x Evaluation Module (ti_am335xevm) board
configuration file.

Change-Id: Id3529e54972f8acd8c790ad55c8d0f4058a1a1f6
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/753
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-19 18:48:06 +00:00
Christopher Kilgour aeb3c4f37e kinetis: update support for all program flash granularities
Updates the Kinetis NOR flash support to handle all known block and sector
sizes.  Previously only 2kiB sectors were hard-coded, now all four known
combinations non-volatile sector sizes are supported.

The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is
also introduced.  This means each "block" of flash (in Freescale terms) is
treated as a bank in OpenOCD.  Correspondingly, the existing board
configuration for the TWR-K60M512 eval system is updated to recognize two
banks instead of one.

A board config for the TWR-K60F120M is also added.

Bank and sector erase and programming has been checked with both of the
mentioned eval boards.

Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Reviewed-on: http://openocd.zylin.com/663
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26 11:53:37 +00:00
Mathias K 423bfc49f9 board: Add Sony Ericsson J100I Phone
This patch add the Sony Ericsson J100I Phone to the board configurations.

Change-Id: I083ddf067c8ecdfdda0404fe9e9df980dbb86fe8
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/631
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25 12:06:41 +00:00
Freddie Chopin caeb057205 Use hardware reset and connect under reset on boards with ST-LINK/V2, as
now it is supported.

Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/609
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14 09:32:20 +00:00
Spencer Oliver a09bb27e23 cfg: add stm320518-eval onboard stlink config
Change-Id: Ie92a87ce077c538fdd04af37c798e0a8054b423a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/610
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14 09:32:03 +00:00
Spencer Oliver 7fca524606 cfg: increase stm32f0discovery board working area
Change-Id: Iea166ee27fc60bbfdeb851fdcf71509f3984f72f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/602
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08 14:05:45 +00:00
Bill Traynor 388d041e0f cfg: add default pid/vid pair to beaglebone board cfg.
The newer versions of BeagleBone boards use the default vid/pid
pair for FT2232 debugging.  Please see the following README:
http://beagleboard.org/static/beaglebone/latest/README.htm
On revision A3/A4 boards, the VID/PID were chosen to match the
 TI XDS100v2 (0x0403/0xA6D0). On A5 and newer revisions when we've
 given the authors of CCS the chance to update their software, the
generic FTDI VID/PID (0x0403/0x6010) will be used to simplify
installation of drivers for systems already having those drivers.

Change-Id: I44228eb2029162f23d084eb05bcfef39e615668d
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/619
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-07 19:58:15 +00:00
Spencer Oliver ee38fff78b cfg: fix incorrect stm32vldiscovery working area
The working area used in the config was incorrect, we only have 8K on this
board not 16K as the original cfg was declaring.

Change-Id: Ie0309fb86d839bd3bc1ac9383905b581fac5c388
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/598
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:06:34 +00:00