Commit Graph

493 Commits (d7646942f2fbbbb37af2effb3e7fdeb03c3fe6be)

Author SHA1 Message Date
Andreas Fritiofson 79d6d3cda9 stm32f30x: Add boundary scan TAP ID to match silicon
Change-Id: I74ef3cfc437540aedd99da46ac3e0c6cd9c5cd8d
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1354
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21 07:19:35 +00:00
Ben Nahill 28cf4e463b stm32w: Added sample target configuration for STM32W108 with STLink-V2
As requested, here is the target configuration that I'm using for an
STLink-V2-attached STM32W108C8. For some reason, it only seems to work
with "reset_config trst_only".

Change-Id: Icbff4f83343e1f505d8afdfc53ff6f8b7496cac9
Signed-off-by: Ben Nahill <bnahill@gmail.com>
Reviewed-on: http://openocd.zylin.com/1347
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-19 20:36:11 +00:00
Peter Dietzsch 460eb952d8 cfg: Added cfg script for at91sam4sd32x targets
Change-Id: I3b8a54d89a180bfded3dae3f1fe3d940540e6e7d
Signed-off-by: Peter Dietzsch <peter.dietzsch@ib-dt.de>
Reviewed-on: http://openocd.zylin.com/1333
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-15 16:56:49 +00:00
Salvador Arroyo 1d040adb0d pic32mx: 0 wait state option
By default pic32mx starts after any reset with 1 wait state for RAM access/exec.
It can be changed to 0 wait states by clearing the BMXWSDRM bit (bit 6) in BMXCON register.
With 0 wait states near doubles the execution speed. CRC check sum can be done much faster
increasing verify_image speed. Fast data transfer also works with a bit higher scan rate, up to 1500 Khz.
This option can be set at any time with
mww 0xbf882004 0x40
or cleared with
mww 0xbf882008 0x40.
Some numbers for FTDI/HS with current devel code and a elf file:

Core clock / wait states	             verify_image speed
------------------------------------|------------------------------

        4 Mhz    /    1                            21 KiB/s
        4 Mhz    /    0                            36 KiB/s
        8 Mhz    /    1                            37 KiB/s
        8 Mhz    /    0                            57 KiB/s

Change-Id: I4092ad0f3753f72f77108718d0ed3a3ab84e3b23
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1141
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-04-02 15:12:44 +00:00
Rodrigo Melo 680230c63c interface: opendous_ftdi config file added
This config file add support to the opendous cable based on the chip ft2232H,
using the ft2232 interface driver.

Change-Id: I8171a0c475af8d61e081844ee86466a392138fb0
Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar>
Reviewed-on: http://openocd.zylin.com/1096
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13 12:32:56 +00:00
Rodrigo Melo 7aaf4f75b3 interface: opendous_ftdi config file added
This config file add support to the opendous cable based on the chip ft2232H,
using the ftdi interface driver.

Change-Id: I4491f99d7b14f7078a04583ef0c4acd8692c4349
Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar>
Reviewed-on: http://openocd.zylin.com/1097
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-07 19:06:51 +00:00
Spencer Oliver 1fd8ac0ee6 cfg: add Netgear DG834v3 configuration
Change-Id: I3f4880d8b07b9623544b94d316b37e6d0ae97020
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1189
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-06 21:57:29 +00:00
Vladimir Zapolskiy 0581ab7855 cfg: add basic support of Freescale i.MX6 series targets
This change adds a simple target configuration for Freescale
single/dual/quad core i.MX6 SoCs, only one core is configured by default.

Change-Id: I853dd27f4c6765b7f731be2ddea82e85d496c6a4
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-on: http://openocd.zylin.com/1135
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-06 19:06:06 +00:00
Mathias K 0f1d00bda6 Change reset configuration.
This patch change the default reset config from SYSRESETREQ to the working
VECTRESET.

Change-Id: I21a9a74b9c0c68cfa3a6e6dac9b123acc98a93cb
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/1186
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-05 15:09:23 +00:00
Johan Almquist bfe1a6c892 stm32: add support for the STM32Lx 384kb dual bank flash
This update adds support for the STM32Lx 384kb dual bank flash. Previously there was a problem when writing an
image that was larger than 192Kb. That lead to openocd printing out two error messages like
"Error: access denied / write protected" and "Error: invalid program address". The reason was that the stm32lx
driver tried to write half pages which overlapped into the next flash bank.
A new configuration file stm32lx_dual_bank.cfg can be used for stm32lx chips with dual bank flash (256kb or 384kb devices).
A sanity check was added for probed flash size values to fix the issue seen on some ST samples that answered incorrectly.

Change-Id: I69e25131983d88613be8606b438f98870c5f1e52
Signed-off-by: Johan Almquist <johan.almquist@assaabloy.com>
Reviewed-on: http://openocd.zylin.com/1125
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-25 11:56:34 +00:00
Franck Jullien 87668aebf1 jtag_interface: .speed can be NULL when not needed
adapter_init (core.c) won't check speed configuration
of the selected interface if it's not needed (.speed = NULL).

When it's not needed, we can now omit adapter_khz in
init scripts and we don't have to implement dummy handlers
for speed_div and khz functions.

It also removes calls to adapter_khz in interface configuration
files when not used anymore.

Change-Id: I6eb1894385503fede542a368f297cec6565eed44
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1131
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-02-08 22:33:19 +00:00
Roman D 7ae9154846 flash: EFM32 flash implementation
Limited (no page unprotect, no block writes) implementation of EFM32
flash support. Verified with EFM32 development kit and STLink V2 adapter
using SWD.

Change-Id: I3db2054d9aa628a1fe4814430425db3c9959c71c
Signed-off-by: Roman D <me@iamroman.org>
Reviewed-on: http://openocd.zylin.com/1106
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-01-14 10:25:55 +00:00
Spencer Oliver 80649fc3d5 cfg: increase stm32l-discovery working area
This part has 16k ram so make it all available.

Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1006
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30 11:35:16 +00:00
Spencer Oliver 84043a95e1 cfg: stm32l use minimum family ram size for working area
The smallest pert in the family has 10k RAM, so use that as a default
for the working area.

Change-Id: I78be0d14a254c109ac15a7163552c6132f810416
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1005
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30 11:34:46 +00:00
Spencer Oliver 54a8640df0 cfg: enable stlink stm32l HSI
Switch to using the internal HSI when a reset init is called, this also
matches the std stm32l cfg.

Read (verify) speed is increased from 17 to 120 KiB/s.

Change-Id: Ic94ba85949ffdefa17b7be45eef14e30f941d107
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1004
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30 11:34:14 +00:00
Spencer Oliver adb8ec32dc icdi: add TI icdi interface
This is the new proprietary interface replacing the older FTDI based adapters.
It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad.

Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/922
Tested-by: jenkins
2012-12-23 21:46:20 +00:00
Spencer Oliver 6c467da586 stlink: rename stlink cmd names
As part of the switch to using the hla for the stlink interface we rename
the cmds to a more generic name.

Update scripts to match new names.

Also add handlers for deprecated names.

Change-Id: I6f00743da746e3aa13ce06acfdc93c8049545e07
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/921
Tested-by: jenkins
2012-12-23 21:45:42 +00:00
Spencer Oliver a047d87196 stlink: use common layout
Even though the stlinkv1 and stlinkv2 use different usb classes they share
the same layout scheme.

Merge the two into a common layout, thus enabling us to support other
adapter layouts.

Change-Id: I7d02c44a7f94ebc7f2cb5428b02ee40294fb430d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/918
Tested-by: jenkins
2012-12-23 21:37:50 +00:00
is2t 1e07f7bb6a LPC1788 target configuration file.
Change-Id: I68bd6b7c19d9d1bee13d0921c32b4490e68ab8f2
Signed-off-by: is2t <devel@is2t.com>
Reviewed-on: http://openocd.zylin.com/1002
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-12-11 12:42:32 +00:00
Salvador Arroyo 115b7be426 Pic32mx.cfg: Change system clock to 8Mhz after reset-init.
As for openocd 0.6.0-rc2 the function mips32_pracc_fastdata_xfer()
should now work at a scan frequency up to 1200Khz.
Mainly usefull to increase programming speed.

Also verify_image should be slightly faster.

Change-Id: I1e9b2be73690a4597e2f6ba069c1205026850f07
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/805
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-16 12:25:19 +00:00
Gianluca Renzi ed3632d9c7 Added support for NXP LPC1850 Microcontroller
Added a new configuration file for LPC18xx based boards, such as
HitexLPC1850RevA Evaluation Board, and all other based on the
same microcontroller by NXP.

Change-Id: I68c3827be535b6d09a5c70b6d57191937d00354d
Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it>
Reviewed-on: http://openocd.zylin.com/930
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06 14:34:37 +00:00
Gianluca Renzi 051ec13abc Generic LPC1850 board w/ SPIFI flash.
This config file is intended as an example of how to
use the lpcspifi flash driver, but it should be functional
for most LPC1850 boards utilizing SPIFI flash.

Change-Id: I855854282336701fd210134497ce014017f3aaec
Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it>
Reviewed-on: http://openocd.zylin.com/929
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06 14:34:16 +00:00
Peter Stuge d2f61e1a45 ftdi/flyswatter2.cfg: Define the LED signal
Change-Id: Ic5d85c0d855bcffba54de7df6cff4d726656af97
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://openocd.zylin.com/940
Tested-by: jenkins
2012-10-28 05:25:17 +00:00
Peter Stuge 9064fa9081 ftdi/flyswatter2.cfg: Fix the signal layout
Change-Id: If6612af25fa3562f49e9c8ccff01b6ef0af5ceb0
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://openocd.zylin.com/938
Tested-by: jenkins
2012-10-28 04:33:27 +00:00
Spencer Oliver c9d9573c29 lpc1768-stick: avoid driving srst high at startup
this avoid driving nSRST high after startup, by making sure the nOE is
initialized inactive/high.

This also matches the config used for the STM32-PerformanceStick.

Change-Id: I9376de575b7dc834310d57dbd58575d51f60183e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/878
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-10-02 22:17:36 +00:00
Spencer Oliver 8d4ad82da7 cfg: cortino tested and working
Change-Id: I13534742c76ebbb05b47bf98768c997068da747a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/851
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 22:03:38 +00:00
Spencer Oliver 28749c15bb cfg: fix incorrect cortino reset config
The cortino uses a direct srst connection rather than via any buffer.
As a result this fixes issues with the newer ftdi driver.

Change-Id: I28f6781bccae24de79aa6a03161f298a14fe2581
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/850
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 22:03:08 +00:00
Spencer Oliver 7cf1a1f04f cfg: ftdi icdi enable srst open drain config
Change-Id: I21a115121f167dc88cd9bf2d1ca1ac9f3e1110d7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/848
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 22:01:43 +00:00
Spencer Oliver 8cbcd56c0e cfg: update ti/stellaris url's
Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/879
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 21:59:48 +00:00
Spencer Oliver f8388cd4bb cfg: lm3s811ek config tested and working
Change-Id: I5402b5521d6e1ef0a569f5cad02c003681f5444b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/847
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 21:59:21 +00:00
Spencer Oliver 3eb80331ce cfg: fix incorrect stm32-performance stick config
This hardware uses a output enable buffer that was not correctly defined.
Fixes issues when using the new ftdi driver.

Change-Id: Iba6235a71a6d3c7d16ab729f858b336a4574dfea
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/844
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-10-02 16:00:44 +00:00
Spencer Oliver a3c09f9624 cfg: stm32-performance stick config tested and working
Change-Id: I9852d11e369e501af240a2b8e9f74306aee4e4a0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/845
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 12:09:00 +00:00
Spencer Oliver ebece4a981 cfg: add ti ek-lm3s9d92 config
Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/853
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:34:54 +00:00
Spencer Oliver a046475f03 cfg: add ti ek-lm3s8962 config
Change-Id: I753cec80a904130088b00b3f81b6dd61808662d6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/852
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:34:41 +00:00
Spencer Oliver 46c1114c1e cfg: str9-comstick tested and working
Change-Id: Ia6c45477381e78cb9508b4731438161e18be1f38
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/843
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:28:32 +00:00
Spencer Oliver 2076ba093d cfg: add STM32F3-DISCOVERY board support
Change-Id: I4a02e0504fc04ffc1238d9bb77ec05c1f781e7e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/810
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-10-02 11:27:59 +00:00
Spencer Oliver 5ed9eb6160 cfg: fix incorrect str9-comstick reset config
The str9-comstick uses a direct srst connection rather than via any buffer.
As a result this fixes issues with the newer ftdi driver.

Change-Id: I0968e8459997a6a2b7bf0c46e89662cd57b4f496
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/842
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:27:02 +00:00
Spencer Oliver abccd76ea4 cfg: fix incorrect stm32f3 TAPID
Change-Id: Id66d4e03a77c47a49086ee753bed01b3944064e1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/855
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 09:37:56 +00:00
George Harris 516719b6b8 Added SPIFI flash driver, algorithms, and docs
Added a flash driver designed to allow program/erase of
memory-mapped SPI flash chips for LPC43xx/LPC18xx family
micros. This driver includes three algorithms - erase,
write, and SPIFI peripheral initialization (to allow
memory-mapped access after a reset). The driver has been
added to the flash driver table (drivers.c), and the
OpenOCD documentation has been updated to include the flash
driver configuration command.

Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514
Signed-off-by: George Harris <george@luminairecoffee.com>
Reviewed-on: http://openocd.zylin.com/783
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26 16:17:42 +00:00
Marc Reilly fe52282c37 drivers: new jtag bitbang driver using sysfs gpio
This driver implements a bitbang jtag interface using gpio lines exported via
sysfs.

The aim of this driver implementation is to use system GPIOs but to avoid the
need for an additional kernel driver.

A config suitable for RaspberryPi is included.

Change-Id: Ib2acf720247a219768d1cbfeebd88057ed2d7b8b
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Reviewed-on: http://openocd.zylin.com/762
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26 16:16:17 +00:00
Freddie Chopin 38e547b9c7 Add JTAG-lock-pick Tiny 2 config files
DISTORTEC's JTAG-lock-pick Tiny 2 is a new interface using FT232HL chip
and layout similar to KT-LINK.

Change-Id: I2831b169cd448ca70397f2dd86c5b749dda3dabf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/787
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-29 06:26:39 +00:00
Spencer Oliver 2ce4e31bbc cfg: update for target's that support cortex_m AIRCR SYSRESETREQ
If the target supports SYSRESETREQ make sure we use that as the default
if srst is not fitted/configured.

Change-Id: I24c907493134506320e69c1218702930629c1cdc
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/792
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29 06:24:36 +00:00
Aurelien Jacobs 939f923927 ftdi: Olimex ARM-USB-TINY validated
Flashing a CFI flash and debugging with gdb work fine.

Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/770
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24 16:49:01 +00:00
Spencer Oliver aec561c7c6 cfg: remove duplicate Olimex ARM-USB-OCD config
This file is already included as olimex-arm-usb-ocd.cfg.

Change-Id: I0e66977c58e74ac93a0dc3a0c88a5e5af4992f8b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/780
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-14 17:49:50 +00:00
Andrew Karpow 66b9bff3b3 cfg: added new openocd-usb highspeed adapter
The embedded projects shop released a new highspeed version of
the openocd-usb adapter. These configuration files adds support
for it.

Change-Id: I9b23d7889f998712b9041af101e3f0b9aba85b28
Signed-off-by: Andrew Karpow <notandyk@gmail.com>
Reviewed-on: http://openocd.zylin.com/771
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-09 22:30:48 +00:00
Vandra Akos ee8df96b2b added target configs for the lpc17xx devices
lpc1751, lpc1752, lpc1754, lpc1756, lpc1758, lpc1759
lpc1763, lpc1764, lpc1765, lpc1766, lpc1767, lpc1768, lpc1769

Change-Id: I740b66930cd379c9390f3c1031cdbada747a6ce4
Signed-off-by: Vandra Akos <axos88@gmail.com>
Reviewed-on: http://openocd.zylin.com/676
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-08-01 21:15:01 +00:00
Joerg Fischer 8fe2bed92c cfg: Add Hitex LPC1768-Stick using ftdi driver
Add cfg files for Hitex LPC1768 Stick
Website: http://www.hitex.com/?id=1602

This board has a FTDI2232D as JTAG interface, using the
same layout as the Hitex STM32-PerformanceStick but with
different USB PID.

Main MCU is a LPC1768 from NXP.

The interface config uses the ftdi driver instead of ft2232.
The corresponding ft2232 layout would be "stm32stick".

Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Reviewed-on: http://openocd.zylin.com/763
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01 21:12:27 +00:00
Freddie Chopin b8862229d0 cfg: Add config file variants using the ftdi driver instead of ft2232
part 4 - files that are currently untested

Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/750
Tested-by: jenkins
2012-08-01 21:10:58 +00:00
Freddie Chopin 2b6a75538a cfg: Add config file variants using the ftdi driver instead of ft2232
part 3 - files that are currently untested but verified with schematics

Change-Id: Ia00c3b6437bffcfa0d178e779926ad9309e289fe
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/755
Tested-by: jenkins
2012-08-01 21:10:30 +00:00
Freddie Chopin b56bad824b cfg: Add config file variants using the ftdi driver instead of ft2232
part 2 - files that are currently untested but assumed to work, as other configs using the same layout work
fine

Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/754
Tested-by: jenkins
2012-08-01 21:09:54 +00:00