Commit Graph

73 Commits (a2a282c7b4501954d99ed30829989df116e5dc43)

Author SHA1 Message Date
Steven Stallion 4ab75a3634 esirisc: support eSi-RISC targets
eSi-RISC is a highly configurable microprocessor architecture for
embedded systems provided by EnSilica. This patch adds support for
32-bit targets and also includes an internal flash driver and
uC/OS-III RTOS support. This is a non-traditional target and required
a number of additional changes to support non-linear register numbers
and the 'p' packet in RTOS support for proper integration into
EnSilica's GDB port.

Change-Id: I59d5c40b3bb2ace1b1a01b2538bfab211adf113f
Signed-off-by: Steven Stallion <stallion@squareup.com>
Reviewed-on: http://openocd.zylin.com/4660
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-10-16 11:58:24 +01:00
Andreas Färber 2d5f2ede55 flash/nor: Add PSoC 5LP flash driver
Always probe for ECC mode and display ECC sectors if disabled.
Non-ECC write is implemented as zeroing the ECC/config bytes.
Erasing ECC sectors is ignored, erase-checking takes them into account.

Tested with CY8CKIT-059 (CY8C5888), except ECC mode.

Change-Id: If63b9ffca7ad8de038be3c086c49712b629ec554
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Reviewed-on: http://openocd.zylin.com/3432
Tested-by: jenkins
2018-06-06 15:48:33 +01:00
Tobias Diedrich 6b9d19d367 flash: Add support for Atheros (ath79) SPI interface
Supported SoCs: AR71xx, AR724x, AR91xx, AR93xx, QCA9558

Extended and revised version of my original patch submitted by Dmytro
here: http://openocd.zylin.com/#/c/3390

This driver is using pure SPI mode, so the flash base address is not
used except some flash commands (e.g. "flash program") need it to
distinguish the banks.

Example config with all 3 chip selects:
flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0
flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1
flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2

Example usage:
> flash probe flash0
Found flash device 'win w25q128fv' (ID 0x001840ef)
flash 'ath79' found at 0x00000000
> flash probe flash1
No SPI flash found
> flash probe flash2
No SPI flash found
> flash banks
> flash read_bank flash0 /tmp/test.bin 0x00000000 0x1000
reading 4096 bytes from flash @0x00000000
wrote 4096 bytes to file /tmp/test.bin from flash bank 0 at offset
0x00000000 in 28.688066s (0.139 KiB/s)

Change-Id: I5feb697722c07e83a9c1b361a9db7b06bc699aa8
Signed-off-by: Tobias Diedrich <ranma+openocd@tdiedrich.de>
Reviewed-on: http://openocd.zylin.com/3612
Tested-by: jenkins
Reviewed-by: Dmytro <dioptimizer@hotmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-05-31 08:18:29 +01:00
Paul Fertser ee4f11dd68 README: fix a typo
Change-Id: I1ad1ba001f8fad0fffa9b6bd5b21dd58be4f6181
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/3902
Tested-by: jenkins
Reviewed-by: Chengyu Zheng <chengyu.zheng@polimi.it>
2016-12-25 09:23:13 +00:00
Jiri Kastner a5cff3acd3 contrib: udev: modify rules for users physically in front of machine (TAG+="uaccess")
Modern desktop systems with systemd recommend this way to give users
access to devices. We change permissions to sane value along the way.

See e.g. https://lists.debian.org/debian-devel-announce/2016/11/msg00008.html

We also change the filename to put it in order with 71-seat.rules, 60
is default for dh_installudev so pick that as a reasonable value.

Change-Id: I15f6fb1b6be853ac097d0ca91955609f9e5eb9cf
Signed-off-by: Jiri Kastner <cz172638@gmail.com>
Reviewed-on: http://openocd.zylin.com/2804
Tested-by: jenkins
Reviewed-by: Robert Jordens <jordens@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-25 09:19:17 +00:00
Andreas Fritiofson 5be455a710 Convert to non-recursive make
Change-Id: I11f8bc8553957e2ff083c09e72e16881e4d3bb6f
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3865
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08 16:23:10 +00:00
Andreas Fritiofson bcaf775fc1 Remove support for the GPL incompatible FTDI D2XX library
Convert Presto, OpenJTAG and USB-Blaster (I) adapter drivers to libftdi
only.

Change-Id: Ib28887620a3dcbb754b9dbf87b9731acca3ac600
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3237
Tested-by: jenkins
Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-06 09:47:12 +00:00
Andreas Fritiofson cc2d4f015f Remove since long deprecated ft2232 driver
Purge all legacy interface configurations so there's no more confusion
over which one to use.

Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just
duplicates what INSTALL says.

Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3236
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-06 09:45:06 +00:00
Esben Haabendal f906c65fed Support for Freescale LS102x SAP
The SAP in LS102x SoC's from Freescale is able to read and write to all
physical memory locations, independently of CPU cores and DAP.

This implementation is 100% based on reverse-engineering of JTAG
communication with an LS1021A SAP using a JTAG debugger with SAP support.

And as such, this code is for now "works-for-me", pending verification
by other OpenOCD users, or even better, actual information from Freescale
on the SAP interface.

Change-Id: Ibb30945e017894da5c402f9f633fc513bed4e68c
Signed-off-by: Esben Haabendal <esben@haabendal.dk>
Reviewed-on: http://openocd.zylin.com/3096
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-06-23 07:37:36 +01:00
Andreas Färber 44d2c7b416 flash/nor: Add Infineon XMC1000 flash driver
The XMC1000 family uses a very different flash interface from XMC4000.

Tested on XMC 2Go and XMC1100 Boot Kit.

Change-Id: I3edaed420ef1c0fb89fdf221022c8b04163d41b3
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3418
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2016-05-05 07:50:59 +01:00
Andreas Färber 43ff5acd45 flash: New Spansion FM4 flash driver
The Spansion FM4 family of microcontrollers does not offer a way to
identify the chip model nor the flash size, except for Dual Flash vs.
regular layout. Therefore the family is passed as argument and
wildcard-matched - MB9BFx6x and S6E2CC families are supported.

Iterations showed that ...
1) Just doing the flash command sequence from SRAM loader code for each
half-word took 20 minutes for an 8 KB block.
2) Doing the busy-wait in the loader merely reduced the time to 19 minutes.
3) Significant performance gains were achieved by looping in loader code
rather than in OpenOCD and by maximizing the batch size across sectors,
getting us down to ~2 seconds for 8 KB and ~2.5 minutes for 1.1 MB.
(Tested with SK-FM4-176L-S6E2CC-ETH v11, CMSIS-DAP v23.)

gcc, objcopy -Obinary and bin2char.sh are used for automating the
integration of hand-written assembler snippets.

Change-Id: I092c81074662534f50b71b91d54eb8e0098fec76
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2190
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29 19:40:20 +00:00
Bogdan Kolbov ae2142d5a2 niietcm4: support for NIIET's Cortex-M4 microcontrollers
This adds docs, example config, flash driver.
Driver is only supports K1921VK01T model for now.

Change-Id: I135259bb055dd2df1a17de99f066e2b24eae1b0f
Signed-off-by: Bogdan Kolbov <kolbov@niiet.ru>
Reviewed-on: http://openocd.zylin.com/3011
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-26 12:17:25 +00:00
Jeff Ciesielski 33b048d456 flash: New driver for XMC4xxx microcontroller family
This is a complete flash driver for the Infineon XMC4xxx family of
microcontrollers, based on the TMS570 driver by Andrey Yurovsky.
The driver attempts to discover the particular variant of MCU via a
combination of the SCU register (to determine if this is indeed an
XMC4xxx part) and the FLASH0_ID register (to determine the variant).
If this fails, the driver will not load.
The driver has been added to the README and documentation.

Tests:
* Hardware: XMC4500 (XMC4500_relax), XMC4200 (XMC4200 enterprise)
* SWD + JTAG
* Binary: 144k, 1M

Note:
* Flash protect only partly tested. These parts only allow the flash
  protection registers (UCB) to be written 4 times total, and my devkits
  have run out of uses (more on the way)

Future Work:
* User 1/2(permalock) locking support via custom command
* In-memory flash loader bootstrap (flashing is rather slow...)

Change-Id: I1d3345d5255d8de8dc4175cf987eb4a037a8cf7f
Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2488
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-11-11 12:08:35 +00:00
Spencer Oliver 8d86633eb7 docs: update OpenOCD url's to openocd.org domain
Change-Id: I8b55c8d12773a1c36f2fd2afeecf20a74e890064
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2698
Tested-by: jenkins
2015-04-16 20:28:21 +01:00
Paul Fertser c4113b5f3d README, doc: add mrvlqspi flash driver information
Change-Id: I7a270cdaf3d9119aa75285a8d1e063c2fe2a31b7
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2510
Tested-by: jenkins
2015-02-12 12:52:19 +00:00
Paul Fertser 70c8328750 doc, README: mention all the variants supported by lpc2000 driver
Change-Id: I66f9a201426a68fc1314ab7f02b27e36dcab33ba
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2508
Tested-by: jenkins
2015-02-12 12:51:46 +00:00
Andreas Bomholtz bdbe78f131 sim3x: new flash driver for Silabs SiM3 microcontroller family
This is a new driver for Silicon Laboratories SiM3 microcontroller
family, based on the work of Ladislav Bábel. The driver will try to
detect the type of MCU from the device id register, and if this
fails it will use the flash size from the flash bank command.
Driver added to the documentation and to the README.
TCL script added.

Tests:
* Hardware: SiM3C166 (pre-production) and SiM3U167
* Binary: 4kb, 197kb, 256kb
* Flash protect not tested

Change-Id: I701e0cf505ca8ad99be7f83543fe5055b2f65dcc
Signed-off-by: Andreas Bomholtz <andreas@seluxit.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2078
Tested-by: jenkins
2015-02-11 22:05:22 +00:00
Paul Fertser 3f9f7de7b0 README: mention "transport select" in quickstart section
Change-Id: I027635c3c8632efcf58cf979b9cb2f99e9e7f046
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2512
Tested-by: jenkins
Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-11 15:34:21 +00:00
Tomas Vanek 1d7176f50b psoc4: support for Cypress PSoC 41xx/42xx family
New NOR flash driver was derived from stm32lx.
Procedure ocd_process_reset_inner is overriden in psoc4.cfg
to handle reset halt and system ROM peculiarities.

Change-Id: Ib835324412d106ad749e1351a8e18e6be34ca500
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2282
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 14:59:55 +00:00
Paul Fertser 8d89373596 tcl/interface/ftdi: add Digilent JTAG-SMT2 config
Tested on ZedBoard by Tim Sander.

Change-Id: I4316d9b4d36f01bbe91a46c78ea8bca22efb1a5a
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2029
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17 12:51:19 +00:00
Andreas Fritiofson e3bb6d390c Rename and sort udev rules file
Also add missing entries for JTAG-lock-pick Tiny 2, Xverve Signalyzer
LITE and default FTDI VID:PIDs.

Change-Id: I41b4f15409642298d1cf134d1f8014dc8f003005
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1969
Tested-by: jenkins
2014-03-07 18:41:59 +00:00
Andrey Smirnov 7e4fb97559 nrf51: Implement the support for Nordic's nRF51 devices
Add support for Nordic's nRF51 chip series. Tested with nRF51822.

Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1945
Tested-by: jenkins
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24 12:09:04 +00:00
Adrian Burns 1338cf60b9 quark_x10xx: add new target quark_x10xx
Intel Quark X10xx SoC debug support added
Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC
Generic x86 32-bit code is in x86_32_common.c/h

Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368
Signed-off-by: adrian.burns@intel.com
Reviewed-on: http://openocd.zylin.com/1829
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-11 13:07:29 +00:00
Paul Fertser 6c1437a0a4 Add CMSIS-DAP information to the READMEs.
Change-Id: I8c87d559adf07b0f0702fe9d388f26bf046bcb8b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1880
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-20 13:29:36 +00:00
Paul Fertser d19fafc8bd Require Autoconf >= 2.64
m4_argn macro was introduced in v2.63b-34-g46e87de on the 22nd of Apr 2009.

Change-Id: Id01cc9f0ffdb46cf6dfd26c3bf3b5efa0ddd2984
Reported-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1656
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-26 09:48:07 +00:00
Paul Fertser e61638b732 README: add missing adapters and flash drivers, mention profiling
This updates README with all the "keywords" added since the initial
upstream submission (and finally fixes the typo in the beginning).

Change-Id: Ia071267246fe6afc19fc0bfcda83c4778e7ff5b1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1624
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-16 22:00:02 +00:00
Paul Fertser 191a5736c2 libusb: require pkg-config support
An alternative approach to show how much cleaner the pure pkg-config
way is.

This changes the discovery procedures for libusb-1.0 and libusb-0.1,
making them depend on pkg-config being properly installed and
configured, including the necessary build host configuration for the
cross-builds (see
http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html)

It should make it possible to compile OpenOCD without changes and
extra effort on GNU/Linux, FreeBSD users would need to supply a .pc
file for their libusb implementation or add LIBUSB1_LIBS and
LIBUSB1_CFLAGS to the configure environment.

Change-Id: I826e378dd1e0d101a549a573b2c63212a7e00b64
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1467
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13 21:43:18 +00:00
Paul Fertser 10df176b0f README* refactoring
This is an attempt to bring the README files in line with the current
status of the OpenOCD development.

- remove some obsolete information and duplicated instructions
- reword some statements
- restructure in a way more appealing to a regular user
- add a supported hardware list to allow a potential user to determine
  if his/her usecase is covered by a freetext keyword search through
  the document
- Add OSX notes (courtesy GrizzlyAdams and inca)

Since most ftdi-based adapters are now covered by the ftdi driver, I
think it's ok to remove some of the libftdi/ftd2xx instructions, the
few users who still need them should refer to upstream docs instead.

I'm not sure if README.Windows should come with the DOS line endings,
but i'd expect many windows users to use their silly notepad to view
it, and notepad ignores LF apparently. (Decided to use LF anyway.)

I understand discussing and reviewing such a massive README change is
a somewhat demanding task but I feel it's a necessity to move forward
maintaining proper documentation.

Change-Id: Idfde3014c72dd5c32ad292ee1ab205322e51a138
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1503
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-13 21:34:14 +00:00
Paul Fertser ab90b87778 configure: remove AM_MAINTAINER_MODE, effectively always enabling all the rules
There're strong arguments against using this macro (mostly regarding
build consistency), so remove it altogether.

Change-Id: I90c8e9a86a24571019366435bd868a6799a09c45
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1476
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-15 10:13:51 +00:00
Paul Fertser 6be2a55bde configure: remove --enable-libusb0 option, rework libusb selection
This makes libusb handling more consistent: if any driver requires
libusb, first check for libusb-1 availability, if not found and
libusb0 is ok for this case, try libusb0.

A user-visible bug fixed by this is that when a user was selecting a
driver that required libusb-1 but was lacking the necessary dev files
or libraries, configure didn't complain (but the build was failing of
course).

--enable-stlink doesn't really require libusb-1 but since it's using the
same automake symbol HLAADAPTER, ti_icdi is getting built too which needs
libusb1 unconditionally. Since using libusb-0.1 makes little sense anyway,
leave that as is.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: I630a4ad9e4583743d45b2233bf5d8f4e5c0aab82
Reviewed-on: http://openocd.zylin.com/1434
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12 14:40:29 +00:00
Freddie Chopin 1936646fc2 Improve clone command in README
Without the explicit dir at the end the repository will be cloned to "code".

Change-Id: Icd8b55b4ba74f23b214c3844e2fb785377768119
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1349
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: jenkins
2013-04-20 07:59:04 +00:00
Spencer Oliver fe97fab6a0 docs: update incorrect urls
These were missed when git was moved to the new SF platform during Nov 2012.

Change-Id: I7b4ae9dea010d95f9bf4c26841b5b724f41768be
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1248
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2013-03-28 23:24:40 +00:00
Spencer Oliver adb8ec32dc icdi: add TI icdi interface
This is the new proprietary interface replacing the older FTDI based adapters.
It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad.

Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/922
Tested-by: jenkins
2012-12-23 21:46:20 +00:00
Spencer Oliver 9fe0457c51 readme: update missing configure args
Change-Id: I495a4557f161290f8f99788de27958f7dc08d6f6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/900
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-07 13:28:01 +00:00
Spencer Oliver 1b2cb095ba docs: update interface support in README
Change-Id: Id4b982ee426dedc85b643a71c1cdba67d0dd0ffd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/682
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-29 18:03:59 +00:00
Øyvind Harboe 39650e2273 ecosboard: delete bit-rotted eCos code
Change-Id: Iff7943eb9da3f41dcc45492acd0f36cf63b3497f
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/503
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: jenkins
2012-03-13 19:11:11 +00:00
Spencer Oliver ca0cc39f5f docs: update project url's
Change-Id: I54fc3aff722ed25143aad85e58d19b72fcecbba0
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-10-12 09:32:59 +01:00
Spencer Oliver cf692abe83 replace berlios url's with sourceforge url's
Change-Id: I1c9957bb64df87cee7c5e832f21453eb8934a5fb
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-10-11 17:18:05 +01:00
Martin Schmölzer 5e2637a4e0 Add description for configure argument "--enable-ulink" to README file 2011-06-26 17:43:51 +02:00
Øyvind Harboe fdae51287c httpd: retire this server
this never panned out and there are enough mistakes in
the code that probably nobody used this.

Use the tcl server and implement a standalone http
app instead works fine.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-11-15 09:18:21 +01:00
David Brownell 74113cf725 README: update libftdi version
The FT2232H really wants libftdi 0.17 or newer; some notable
bugs got fixed in that version.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-05 19:00:08 -08:00
David Brownell 4aa0a4d811 User's Guide mentions OS-specific installation
Specifically the Linux issue of needing "udev" rules, and MS-Windows
needing driver configuration.

Also, update the existing udev note to use the correct name of that
rules file in the source tree.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-21 09:29:24 -08:00
Uwe Hermann cfc02ccca2 fix typos in documentation
Fixes some minor typos in the top-level documentation files.

Signed-off-by: Zachary T Welch <zw@superlucidity.net>
2009-11-26 10:12:22 -08:00
Zachary T Welch 0091e59d2a allow documentation to be configured
Add --disable-doxygen-html and --enable-doxygen-pdf options to the
configure script, allowing user to change the defaults.  These
update the proess of munging the Doxygen configuration file to
use the settings thusly provided.  Add options in README.
2009-11-17 11:42:48 -08:00
David Brownell 7252a72465 Houston, we have Mirror! 2009-10-07 19:11:37 -07:00
dbrownell 03c9e48f88 Change most in-tree references from SVN to GIT.
Also, talk about "mainline" not "trunk".

The release.txt and release.sh files need more updates.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2825 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-08 00:13:50 +00:00
ntfreak ef30f22fd3 - remove enable-ft2232-highspeed configure option, high speed ftdi support is now detected during the configure stage
- warning now issued if high speed ftdi device found and openocd was built using an old driver

git-svn-id: svn://svn.berlios.de/openocd/trunk@2599 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-20 07:54:49 +00:00
ntfreak a634b5d52e Jonas Horberg [jhorberg@sauer-danfoss.com]
https://lists.berlios.de/pipermail/openocd-development/2009-August/009939.html

1. It can only be built with the FTD2XX driver. libftdi supports FT2232H/FT4232H 
since version 0.16 

2. A speed value of 0 is used as a RTCK request indicator. This clashes with the 
valid clock division value 0 that provide the highest fixed clock frequency. 

3. The ft2232_speed_div function return the maximum selectable frequency (30MHz) 
when RTCK is activated. It should return 0. 

4. The ft2232_khz function return ERROR_OK when RTCK is requested even for 
devices lacking RTCK support. It should return ERROR_FAIL so the upper driver layers 
can detect this and try to fallback to a fixed frequency. 

5. FT2232H/FT4232H have a backward compatibility function that divide the clock 
by 5 to get the same frequency range as FT2232D. There is no code that disable 
this functionality. I can not find anything about if this is enabled or disabled by default. 
I think it is safest to actively disable it. 


git-svn-id: svn://svn.berlios.de/openocd/trunk@2591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18 14:41:58 +00:00
oharboe 8b82de60c7 David Brownell <david-b@pacbell.net> mention udev, and correct D2XX speed mentions
git-svn-id: svn://svn.berlios.de/openocd/trunk@2526 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14 18:24:59 +00:00
zwelch ff5170a979 Split Windows README instructions into new file, with a few fixes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2515 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14 07:35:29 +00:00