There is no DEBUG() macro; don't call one! Always at
least *parse* debug code, to help prevent such errors.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
In target_type.h it's documented that the target must be
halted for add_breakpoint() ... and with slight ambiguity,
also for its add_watchpoint() sibling. So rather than
verifying that constraint in the CPU drivers, do it in the
target_add_{break,watch}point() routines.
Add minor paranoia on the remove_*point() paths too: save
the return value, and print it out in in the LOG_DEBUG message
in case it's nonzero.
Note that with some current cores, like all ARMv7 ones I've
looked at, there's no technical issue preventing watchpoint or
breakpoint add/remove operations on active cores. This model
seems deeply wired into OpenOCD though.
ALSO: the ARM targets were fairly "good" about enforcing that
constraint themselves. The MIPS ones were relied on other code
to catch such stuff, but it's not clear such code existed ...
keep an eye out for new issues on MIPS.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use the new "reset-assert" event; else SRST; else fail.
Tested on an OMAP3, using the event.
NOTE: still doesn't handle "reset halt". For some reason
neither VCR nor PRCR seemed effective; they held the value
that was written, but VCR didn't trigger debug entry when
the reset vector fired (maybe the vector needs configuring?)
and PRCR refused to hold the chip in reset until deassert()
could force the core into debug state.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This defines a "reset-assert" event and a supporting utility
routine, and documents both how targets should implement it
and how config scripts should use it. Core-specific updates
are needed to make this work.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When writing to a chip's "reset yourself" register, the ARM11 code
was reporting a spurious failure. Just don't bother checking for
correctly incremented pointers given single-unit writes ... it's
a bit faster that way too. (Reads should likely do the same thing.
For that matter, such checks are usually just a waste...)
Shrink an overlong parameter name, and associated lines'o'code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The command refactoring caused subcommand handlers to produce duplicate
output when run. The problem was introduced by failing to ensure all
such invocations went through a top-level "catcher" script, prefixing
the command name with the 'ocd_' prefix and consuming its results.
The fix is to ensure such a top-level "catcher" script gets created
for each top-level command, regardless of whether it has a handler.
Indeed, this patch removes all command registrations for sub-commands,
which would not have worked in the new registration scheme anyway.
For now, dispatch of subcommands continues to be handled by the new
'unknown' command handler, which gets fixed here to strip the 'ocd_'
prefix if searching for the top-level command name fails initially.
Some Jim commands may be registered with this prefix, and that situation
seems to require the current fallback approach. Otherwise, that prefix
could be stripped unconditionally and the logic made a little simpler.
The same problem must be handled by the 'help' command handler too,
so its lookup process works as intended.
Overall, the command dispatching remains more complicated than desired,
but this patch fixes the immediate regressions.
Move device argument parsing after check for number of arguments;
otherwise, calling this command without any arguments would access
argv[0] before checking whether it even existed.
Fixed the header file to properly specify the doxygen documentation for the
items defined in it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This updates the functions in the file to all have doxygen comments
describing what they do.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Created a function for copying code to the working area on
a target. The NAND write and read functions are updated to
include use of this function.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Implementation of the NAND read function for ARM NAND I/O that
includes running a local algorithm on a device to increase the
performance of block reads.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Just make these fail, instead of letting them write over
potentially random memory. Users should be able to work
around the lack of real implementations by disbling the
MMU by hand ... until someone provides a Real Fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Command upgrading introduced two off-by-one bugs in the flash commands.
This patch fixes the 'flash {protect,erase_sector}' commands to check
that they have been passed the correct number of arguments.
Ammended during commit to fix help text for 'erase_address' too.
Several of the sites now using target_type_name() really
ought to be using an instance-specific name. Create a
function called target_name(), accessing the instance's
own (command) name.
Use it in several places that really should be displaying
instance-specific names. Also in several places which
were already doing so, but which had no wrapper to call.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
There are two names that may matter on a per-target basis.
One is a per-instance name (for example, "at91sam7s.cpu").
The other is the name of its type (for example, "arm7tdmi"),
which is shared among multiple targets.
Currently target_get_name() returns the type name, which is
misleading and is rarely appropriate for target diagnostics.
Rename that as target_type_name().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Removes redundant assignment of start_ms from log_register_commands().
Eliminates command_context parameter and return value.
Adds Doxygen comment block for this API call.
Alliteration aside, this should provide the final piece of the puzzle
for developers that want to get started writing a new target type.
In this way, it also seeks to complement the 'dummy' interface driver
and 'faux' NOR flash driver.
Removes hello and foo commands from top-level registration. Instead,
the dummy interface driver and faux flash driver have been augmented
to register these commands as sub-commands.
Factors log capture while running script commands, eliminating
duplicated code between script_command and jim_capture. Factors
setting a command's Jim "retval" into a new helper as well.
Using these new helpers in the new unknown command handler's
fixes possible regressions caused by these bits being missing.
The add_usage_text command uses the same C handler, which was updated
to support its new polymorphic role. This patch updates the two script
commands that needed this support: 'find' and 'script'.
Updates httpd_start() to use register_commands() for 'readform' and
'writeform' commands. Adds server/httpd.h to export the new signatures
for this function (and httpd_stop), which allows removing the obsoleted
declarations inside openocd.c.
Adding jim_handler field to command_registration allows removing the
register_jim helper. All command registrations now go through the
register_command{,s}() functions.
Converts callback to an array of command_registration records.
Moves oocd_trace driver definition to end of file to eliminate
useless forward declaration.
Uses chaining of command_registration structures to eliminate all
target_type register_callback routines. Exports the command_handler
registration arrays for those target types that are used by others.
Changes the jtag_interface->register_callbacks field to a list of
commands to be registered. Changes callback to invocation of
register_commands() with that command registration list. Removes all
JTAG interface driver register_command callback functions, which the
previous commits had converted into identical calls.
Use register_commands() with command registration array.
---
This module was broken by previous changes, but no one has complained.
Are there still users for this modules?
Use the new command registration chaining capabilities to eliminate
the foo_register_commands helper, folding its remaining command
handler setup into the hello_command_handlers registration array.
David Brownell
Zachary T Welch
Øyvind Harboe
Dean Glazeski
Uwe Hermann
Eric Wetzel