1aba820519
Add -DPKGLIBDIR to AM_CPPFLAGS.
...
This is required so the OpenULINK driver knows the install location of the OpenULINK
firmware image.
2011-06-26 17:43:51 +02:00
5141ab3e69
Include ULINK driver in src/jtag/drivers/Makefile.am
...
A new variable "nobase_dist_pkglib_DATA" is introduced to install
the OpenULINK firmware image to $PREFIX/lib/openocd/OpenULINK/ulink_firmware.hex
Also, the variable "EXTRA_DIST" is used to include the OpenULINK firmware source
in the OpenOCD source distribution.
2011-06-26 17:43:51 +02:00
29f6f6ae5f
Include ULINK driver in src/Makefile.am
2011-06-26 17:43:51 +02:00
379abb9167
Include ULINK driver in configure.in
2011-06-26 17:43:51 +02:00
b4bbe33d17
Add ULINK interface script
2011-06-26 17:43:51 +02:00
f279e54347
Include ULINK driver in src/jtag/interfaces.c
2011-06-26 17:43:51 +02:00
3c3f3c4247
Add OpenULINK firmware
...
Build requires SDCC, the Small Device C Compiler.
2011-06-26 17:43:51 +02:00
03e4ae8481
Add source code for new ULINK driver
2011-06-26 17:43:50 +02:00
37aaa28292
Fix load_image for ELF with all p_paddr set to zero
...
So far image_load command tries to load ELF binaries to address
discovered by reading p_paddr member of a Program header of an ELF
segment.
However, ELF specifications says for p_paddr : ...Because System V
ignores physical addressing for application programs, this member has
unspecified contents for executable files and shared objects.
ARM ELF specifiaction goes even further, demanding that this member
be set to zero, using the p_vaddr as a segment load address.
To avoid the cases to wrong addr where p_paddr is zero,
we are now using p_vaddr to as a load destination in case that *all*
p_paddr == 0. Basically, this patch re-implements the approach present in
BDF's elf.c, which is used by GDB also (so that we can be consistent).
2011-06-24 11:00:35 +02:00
e7c611deea
build: do not included generated files in distribution
...
We have to use this method as automake seems to ignore nodist_ on libs.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-17 12:22:37 +01:00
16cbe1216a
build: add missing files to make dist
...
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-17 12:21:01 +01:00
9cac49caee
build: pass correct flags to jimtcl during make distcheck
...
This is only for the case of a make distcheck.
During a normal release build these flags will be created by configure.gnu
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-17 09:31:13 +01:00
3428035a7e
build: add missing files from dist release
...
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-17 09:31:13 +01:00
37d5ac6378
ADAPTER: Fixed transport selection mechanism to support transports other than jtag (if defined).
2011-06-16 19:49:54 +02:00
9f40d41f68
OPENOCD: Renamed ambiguous main2() into openocd_thread() to show possible solution for thread support in future.
2011-06-16 17:27:12 +02:00
523c172280
Added Olimex STM32 {H,P}107.cfg board
2011-06-16 16:53:49 +02:00
c8b5719802
transport: move files over to transport folder
...
as we introduce swd and jtag as two transports, we want
to start up with a new transport folder to organize the
code a bit.
2011-06-13 15:51:04 +02:00
1b0862c189
HACKING: add tip on how to write comments
2011-06-12 11:33:37 +02:00
5227ae7162
added minimodule interface
2011-06-12 11:18:27 +02:00
47aa65b3e8
doxy more
2011-06-12 11:18:27 +02:00
d343941386
doxy & cleanup
2011-06-12 11:18:27 +02:00
cbe201fe6b
fix protection behavior
2011-06-12 11:18:27 +02:00
7b0ead520d
cleanup trailing whitespaces
2011-06-12 11:18:27 +02:00
f4b9a2fc8b
flash speed improved
2011-06-12 11:18:27 +02:00
ca76e4a423
removed unnecessary actions/controls
2011-06-12 11:18:27 +02:00
c4bcb0b95a
cleanup flash module command
2011-06-12 11:18:27 +02:00
d539fc856f
fix read for verify_image
2011-06-12 11:18:27 +02:00
f42353d821
fix read speed improved by queueing commands
2011-06-12 11:18:27 +02:00
f4a3db0d4a
fix flash driver size, sector erase
2011-06-12 11:18:27 +02:00
56d3927abf
Added minimodule (ftdi) interface
2011-06-12 11:18:27 +02:00
e899fcaca0
Added configuration file for STM3220G-EVAL board.
2011-06-08 07:19:43 +02:00
01c0ffe98f
Added configuration file for stm32f2xxx.
2011-06-08 07:19:39 +02:00
33f9bec9ec
Silence -O3 warning
2011-06-07 17:58:41 +02:00
1cfb2287a6
Fix "unused variable" warnings (errors) detected with GCC 4.7.0 - leftover changes
2011-06-07 17:53:33 +02:00
5d9b7cdd2b
mips: add nor flash write from memory block
2011-06-05 22:45:21 +02:00
c989de0cea
crc check on flashed data
2011-06-04 09:52:14 +02:00
d09bef2622
code cleanup
2011-06-04 09:52:14 +02:00
f499bab698
Fix "unused variable" warnings (errors) detected with GCC 4.7.0 - dubious fixes
2011-06-04 09:46:48 +02:00
f6315d5e5b
Fix "unused variable" warnings (errors) detected with GCC 4.7.0 - trivial fixes
2011-06-04 09:35:13 +02:00
ae02a0e517
uptech2410
2011-06-02 12:17:28 +02:00
fa1f2682d4
bootstrap: Various code improvements
...
- Do not specify -e twice.
- Use "which" instead of calling commands that might not exist.
- Fix bashism ("==" is C not sh)
- Carefully quote potentially empty variables
- Check command arguments before doing anything
- Rewrite argument checking to be more easily extensible
- Consistent indentation
- UNIX style error messages
2011-06-01 21:45:50 +02:00
796086cd49
mips: fixup fastdata
...
fixup fastdata
2011-06-01 07:23:42 +02:00
524d79ebe7
mips: fix some more endian madness
2011-06-01 07:23:35 +02:00
4da551732e
bootstrap: fix argument handling
...
- no argument => run submodule init
- "nosubmoudle" => do not run submodule
- other values => error message
2011-06-01 07:21:11 +02:00
096fd6bcc0
Board definition for mini6410/tiny6410 (ARM1176)
...
The following mini6410/tiny6410 functions are available:
init_6410 - initialize clock, timer, DRAM
init_6410_flash - initializes NAND flash support
install_6410_uboot - copies u-boot image into RAM and runs it
2011-05-29 23:42:09 +02:00
875298bc53
mips: fix swapping if running on big endian host
2011-05-29 23:21:23 +02:00
ba576920cf
SMDK6410 is not target, move file to board
2011-05-29 20:05:01 +02:00
9b4628ddab
Fixed values for Samung NAND chips
2011-05-28 19:44:17 +02:00
db91a36fdd
Improve NAND flash detection
...
Detect based on both manufacturer id and chip id
if manufacturer id is defined in table
2011-05-28 14:30:58 +02:00
acdf14eb43
Reorganize NAND flash table
...
- added manufacturer field
- name moved to the end for better text alignment
2011-05-28 14:27:48 +02:00
Martin Schmölzer
Drasko DRASKOVIC
Spencer Oliver
Tomek CEDRO
Dale Lukas Peterson
Øyvind Harboe
rlrosa
Rodrigo L. Rosa
Laurent Charpentier
Freddie Chopin
Stefan Mahr
Bear
Tormod Volden
Damjan Marion