Commit Graph

191 Commits (0d8f60e28f0f6e2bf65c674154b129fffae9eca8)

Author SHA1 Message Date
Øyvind Harboe da9f72ca0a zy1000: it has a CFI chip, no need for the ecosflash driver
The ecosflash driver is no longer used by any of the config
scripts. It is more useful to get more testing of CFI.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-04-30 02:51:05 +02:00
Marek Vasut 56a21c9cb1 Add Voipac PXA270 module support
This patch adds support for the Voipac PXA270 module. Including NOR flash.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-04-26 07:08:55 +02:00
Marek Vasut e0285dbe73 Add VPACLink interface definition
This patch adds definition file for the Voipac VPACLink JTAG adaptor. The
adaptor is combined JTAG/UART device.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-04-26 07:08:52 +02:00
michal smulski c6cd253ae1 telo: update configuration scripts to matched master branch
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-04-24 16:51:34 +02:00
Antonio Borneo d31bbc33fa TCL SCRIPTS: fix command name
Some tcl script has underline between the words "flash bank"
resulting in 'invalid command name "flash_bank"'.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-04-15 19:10:36 +02:00
Antonio Borneo 27b98c2fa5 TCL scripts: update to current "flash bank" syntax
While "flash bank" syntax has been changed long ago,
several tcl script are still not fully update.

Fix following cases related with "cfi" driver:
- syntax error: the mandatory <name> parameter is missing
- warning: the <target> parameter is a number, instead of
  the target name
- the comment line above the command does not report
  actual syntax

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-03-26 08:42:58 +01:00
Spencer Oliver 679f6602fd PARPORT: add PARPORTADDR tcl variable
Add PARPORTADDR tcl variable making it easier to
change parallel port address in scripts.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-16 10:10:21 +00:00
Spencer Oliver 82f44a4708 PIC32: add Microchip Explorer16 cfg
- add Microchip Explorer16 cfg using PIC32MX360F512L PIM.
 - remove reset config from PIC32 target cfg.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-16 10:10:20 +00:00
David Brownell 1bd3ae3986 rename jtag_nsrst_assert_width as adapter_nsrst_assert_width
Globally rename "jtag_nsrst_assert_width" as "adapter_nsrst_assert_width",
and move it out of the "jtag" command group ...  it needs to be used with
non-JTAG transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:42:26 -07:00
David Brownell b559b273b5 rename jtag_nsrst_delay as adapter_nsrst_delay
Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it
out of the "jtag" command group ...  it needs to be used with non-JTAG
transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:41:30 -07:00
David Brownell 96f9790279 rename jtag_khz as adapter_khz
Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag"
command group ...  it needs to be used with non-JTAG transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.  (We may want to
update it to include a nag message too.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:37:43 -07:00
Spencer Oliver de761e350b PIC32MX: update cfg script
The default config script will now dynamically setup the BMX registers
in the reset init script.
This will also work if the user overrides the default working area.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-15 09:38:46 +00:00
Michal Demin 24e1e3dd26 Add support for Bus Pirate as a JTAG adapter.
This includes a driver and matching config file.  This support needs to be
enabled through the initial "configure" (use "--enable-buspirate").

Signed-off-by: Michal Demin <michaldemin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-11 11:35:50 -08:00
Spencer Oliver 257a764582 PIC32: add flash algorithm support
Add flash algorithm support for the PIC32MX.
Still a few things todo but this dramatically decreases
the programing time, eg. approx programming for 2.5k test file.
 - without fastload: 60secs
 - with fastload: 45secs
 - with fastload and algorithm: 2secs.

Add new devices to supported list.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-10 21:03:22 +00:00
David Brownell c6e323b983 doc: not all debug adapters are "dongles"
Talk more about "debug adapters" instead of only "dongles".  Not all
adapters are discrete widgets; some are integrated onto boards.  If
we only talk about "dongles" we rule out many valid setups, and help
confuse some users (who may be using Dongle-free environments).

Also start bringing out the point that JTAG isn't the only transport
protocol, even though OpenOCD historically presumes "all is JTAG".
(Not all debug adapters are JTAG adapters, or JTAG-only adapters.)

Plus a few minor fixes (spelling etc) in the vicinity of those changes,
and updates about FT2232H clocking issues (they can go faster than the
older chips, and can support adaptive clocking).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-05 21:09:03 -08:00
David Brownell 53b3d4dd53 LPC1768 updates, IAR board support
Fix some issues with the generic LPC1768 config file:

 - Handle the post-reset clock config:  4 MHz internal RC, no PLL.
   This affects flash and JTAG clocking.

 - Remove JTAG adapter config; they don't all support trst_and_srst

 - Remove the rest of the bogus "reset-init" event handler.

 - Allow explicit CCLK configuration, instead of assuming 12 MHz;
   some boards will use 100 Mhz (or the post-reset 4 MHz).

 - Simplify: rely on defaults for endianness and IR-Capture value

 - Update some comments too

Build on those fixes to make a trivial config for the IAR LPC1768
kickstart board (by Olimex) start working.

Also, add doxygen to the lpc2000 flash driver, primarily to note a
configuration problem with driver: it wrongly assumes the core clock
rate never changes.  Configs that are safe for updating flash after
"reset halt" will thus often be unsafe later ... e.g. for LPC1768,
after switching to use PLL0 at 100 MHz.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-02 15:02:01 -08:00
Mariano Alvira 0324eb2496 Add board/redbee-usb.cfg
The Redbee USB is a small form-factor usb stick from Redwire, LLC
(www.redwirellc.com/store), built around a Freescale MC13224V
ARM7TDMI + 802.15.4 radio (plus antenna).

It includes an FT2232H for debugging, with Channel B connected to the
mc13224v's JTAG interface (unusual) and Channel A connected to UART1.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-28 10:33:46 -08:00
Mariano Alvira 63763345d9 add board/redbee-econotag.cfg and JTAG support
The Redbee Econotag is an open hardware development kit from
Redwire, LLC (www.redwirellc.com/store), for the Freescale
MC13224V ARM7TDMI + 802.15.4 radio.

It includes both an MC13224V and an FT2232H (for JTAG and UART
support).  It has flexible power supply options.

Additional features are:

  - inverted-F pcb antenna
  - 36 GPIO brought out to 0.1" pin header
    (includes all peripheral pins)
  - Reset button
  - Two push buttons (on kbi1-5 and kbi0-4)
  - USB-A connector, powered from USB
  - up to 16V external input
  - pads for optional buck inductor
  - pads for optional 32.768kHz crystal
  - 2x LEDS on TX_ON and RX_ON

[ dbrownell@users.sourceforge.net: shrink lines; texi ]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-27 22:52:34 -08:00
Mariano Alvira e4a40d257d Add target/mc13224v.cfg
The MC13224V is a FreeScale ARM7TDMI based IEEE802.15.4 platform for
Zigbee and similar low-power wireless applications. Using PIP
(Platform In Package) technology, it integrates: an RF balun and
matching network; a buck converter (only an external inductor is
necessary); 96KB of SRAM; and 128KB of non-volatile memory.

It has an integrated bootloader and can boot from a variety of sources:
external SPI or I2C non-volatile memory, an image loaded over UART1,
or the internal non-volatile memory. The image loaded from one of these
sources is executed directly from SRAM starting at location 0x00400000.

Open source development code at http://mc1322x.devl.org

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-27 22:51:41 -08:00
David Brownell 57d5673dea CSB337 board cleanup (quasi-regression)
Get rid of new nasty warning:

NOTE! Severe performance degradation without fast memory access enabled...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-20 20:47:38 -08:00
David Brownell 5869992314 LPC1768.cfg -- partial fixes for bogus reset-init handler
Cortex-M targets don't support ARM instructions.

Leave the NVIC.VTOR setup alone, but comment how the whole
routine looks like one big bug...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-15 13:39:16 -08:00
Viktar Palstsiuk 32188c5004 target library: configuration files for openocd tested with Atmel SAM-ICE V6 JTAG.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-02-11 21:10:51 +01:00
Spencer Oliver f899c2aa97 str730.cfg: fix incorrect mem regions
- update str73x mem regions to correct values.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-02-09 14:49:47 +00:00
Ethan Eade 8b049fdba5 scripts: Phytec/LPC2350 config scripts
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-02-04 10:25:44 +01:00
Harald Kipp 18969466c9 AT91R40008/Ethernut 3 configuration
Moved board specific settings from target/at91r40008.cfg to a new
file board/ethernut3.cfg.

Set correct CPUTAPID.  Reset delay increased, see MIC2775 data sheet.
Increased work area size from 16k to 128k.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 11:09:53 -08:00
Edgar Grimberg cc440ca1d4 tcl/str7x: Reset init unlocks the flash
For STR7x flash, the device cannot be queried for the protect status.
The solution is to remove the protection on reset init. The driver
also initialises the sector protect field to unprotected.

[dbrownell@users.sourceforge.net: line length shrinkage]

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 09:30:33 -08:00
Edgar Grimberg 503f6139c7 flash/str7x: After reset init the flash is unlocked
The default state of the STR7 flash after a reset init is unlocked.
The information in the flash driver now reflects this.

The information about the lock status cannot be read from the
flash chip, so the user is informed that flash info might not
contain accurate information.

[dbrownell@users.sourceforge.net: line length shrinkage]

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 09:30:33 -08:00
Edgar Grimberg dfba7fa949 interface: Changed parport address to LPT1
Changed the parport address to LPT1, since it's the most obvious default value.

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
2010-01-21 15:58:59 +01:00
David Brownell 22d25e6921 board configs -- unique names for flash chips
Don't give the same names to both flash chips on two OMAP boards.

For OSK, enable DCC downloads (removing a warning).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-20 10:46:53 -08:00
Michael Grzeschik d036f17001 tcl/target/at91sam3u4e.cfg: changed case in dependent file
openocd does not start with the target configfile due to the case in the
dependent config file.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-20 10:32:53 -08:00
Vladimir Zapolskiy 1de107a5a2 Added Openmoko USB JTAG interface config file.
Added interface config file for JTAG/RS232 debug board originally
integrated to Neo 1973 and Neo FreeRunner phones.
Adapter was tested with i.MX31, S3C2410 and AT91SAM9260 processors.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
2010-01-11 15:58:13 +01:00
David Brownell ff647e6bb4 parport (mostly) doc fixes
The "parport_port" commands generally don't *require* a port_number;
they're of the "apply any parameter, then print result" variety.  Update
the User's Guide accordingly.

Some of those commands are intended to be write-once: parport_port,
and parport_cable.  Say so.

Use proper EBNF for the parport_write_on_exit parameter.

Parport address 0xc8b8 is evidently mutant.  Say so in the "parport.cfg"
file, to avoid breaking anyone with that mutant config.  But update the
User's Guide to include a sane example for the LP2 port.

Finally document the "presto_serial" command.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-09 21:56:11 -08:00
Spencer Oliver ba96fc3e9d PIC32: enable ram execution
add reset-init script to allow ram execution from reset, this is required for ejtag fastdata access.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-01-05 19:54:37 +00:00
Antonio Borneo 668f20d0ab Added ST FlashLINK interface config file.
The relevant cable config is already in OpenOCD, but not a config for
the JTAG adapter.  I have tested with FlashLINK on ARM926.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-02 01:50:57 -08:00
Antonio Borneo c116d8f6bc Fix parport_dcl5 config file.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2009-12-30 19:07:44 +01:00
Piotr Esden-Tempski d4bef466c3 Added Open-BLDC board config file. 2009-12-29 12:41:43 +01:00
Piotr Esden-Tempski aa81462618 Added floss-jtag interface config file. 2009-12-29 12:41:43 +01:00
David Brownell ec297e4bf1 Fix Luminary FT2232 layout docs/configs
Most of this patch updates documentation and comments for various
Luminary boards, supporting two bug fixes by helping to make sense
of the current mess:

 - Recent rev C lm3s811 eval boards didn't work.  They must use
   the ICDI layout, which sets up some signals that the older
   boards didn't need.  This is actually safe and appropriate
   for *all* recent boards ... so just make "luminary.cfg" use
   the ICDI layout.

 - "luminary-lm3s811.cfg", was previously unusable!  No VID/PID;
   and the wrong vendor string.  Make it work, but reserve it
   for older boards where the ICDI layout is wrong.

 - Default the LM3748 eval board to "luminary.cfg", like the
   other boards.  If someone uses an external JTAG adapter, all
   boards will use the same workaround (override that default).

The difference between the two FT2232 layouts is that eventually
the EVB layout will fail cleanly when asked to enable SWO trace,
but the ICDI layout will as cleanly be able to enable it.  Folk
using "luminary.cfg" with Rev B boards won't see anything going
wrong until SWO support is (someday) added.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28 12:59:47 -08:00
David Brownell 3ace333663 create tcl/board/dm365evm.cfg
This config is only lightly tested, and doesn't work well yet;
but it's a start.

 * Notably missing is PLL configuration, since each DaVinci
   does that just a bit differently; and thus DDR2 setup.

 * The SRST workaround needed for the goof in the CPLD's VHDL
   depends on at least the not-yet-merged patch letting ARM9
   (and ARM7) chips perform resets that don't use SRST.

So this isn't yet suitable for debugging U-Boot.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-27 12:16:55 -08:00
Catalin Patulea 84dbf8ab5a Driver for USB-JTAG, Altera USB-Blaster and compatibles
The 10-pin JTAG layout used with these adapters is used by
a variety of platforms including AVR.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 15:05:06 -08:00
Dean Glazeski 900d745567 Olimex SAM9-L9260 board configuration update.
This updates the board configuration for the SAM9-L9260 board with the
configuration for the on-board NAND and dataflash.  Included are commands
for configuring the AT91SAM9 NAND flash driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 13:08:24 -08:00
Spencer Oliver 3616b93eee target.cfg: update to use new flash configuration syntax
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2009-12-17 11:39:09 +00:00
David Brownell 960ad2f776 Remove duplicate Olimex-"tiny" interface
We already have tcl/interface/olimex-jtag-tiny.cfg and
don't need a clone of it.
2009-12-16 14:21:06 -08:00
David Brownell 4a2f4e3433 more tcl/{board,target} cleanup
Remove more remnants of the old "jtag_device" syntax.

Don't [format "%s.cpu" $_CHIPNAME] ... it's needless complexity.

Remove various non-supported "-variant" target options; they're not
needed often at all.

Flag some of the board files as needing to have and use target files
for the TAP and target declarations.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-15 14:45:26 -08:00
David Brownell 80a757d82e testing/examples/.../*cfg: rm jtag_device calls
That syntax has been obsolete forever and is now gone; remove a few
remaining references.  Shows how seldom this stuff gets used.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-15 14:45:26 -08:00
mkdorg@users.sourceforge.net 646ce814b4 target: add basic dsp563xx support 2009-12-15 18:38:52 +01:00
Øyvind Harboe d6aff79f1a imx31: move srst delay into config script
reset init/run now works again.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-12-15 07:55:20 +01:00
David Brownell c86a64dff7 lm3748: use new Stellaris config file
Use the new file, and remove the old target/lm3s3748.cfg one.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-14 16:29:53 -08:00
Yegor Yefremov a1009509fb Common target file for Stellaris chips
Common target.cfg file for LM3S CPU family

[dbrownell@users.sourceforge.net: rename, generalize more]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-14 16:29:31 -08:00
David Brownell ecd709fa55 OMAP2420: define reset-assert event
Behave like OMAP3530:  force global software reset.  Given the
patch to teach ARM11 how to use these events, and use VCR to
catch the reset vector, this works better than either the
current reset logic or than using SRST.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-07 14:57:43 -08:00