zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

add at91rm9200-ek board support 

tested with jlink sam-ice v5 while loading barebox

(gdb) load
Loading section .text, size 0x2f190 lma 0x21f00000
Loading section .rodata, size 0x931c lma 0x21f2f190
Loading section .data, size 0x29e8 lma 0x21f384ac
Loading section .barebox_cmd, size 0x78c lma 0x21f3ae94
Loading section .barebox_initcalls, size 0x80 lma 0x21f3b620
Start address 0x21f00000, load size 243360
Transfer rate: 26 KB/sec, 13520 bytes/write.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
__archive__
Jean-Christophe PLAGNIOL-VILLARD 2011-02-21 18:59:50 +01:00 committed by Øyvind Harboe
parent 05abfbadf1
commit f26cd96740
1 changed files with 112 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

112
tcl/board/at91rm9200-ek.cfg Normal file
View File

@ -0,0 +1,112 @@
#
# Copyright 2010 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
#
# under GPLv2 Only
#
# This is for the "at91rm9200-ek" eval board.
#
#
# It has atmel at91rm9200 chip.
source [find target/at91rm9200.cfg]
reset_config trst_and_srst
$_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { at91rm9200_ek_init }
## flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0x10000000 0x00800000 2 2 $_TARGETNAME
proc at91rm9200_ek_init { } {
# Try to run at 1khz... Yea, that slow!
# Chip is really running @ 32khz
adapter_khz 8
mww 0xfffffc64 0xffffffff
## disable all clocks but system clock
mww 0xfffffc04 0xfffffffe
## disable all clocks to pioa and piob
mww 0xfffffc14 0xffffffc3
## master clock = slow cpu = slow
## (means the CPU is running at 32khz!)
mww 0xfffffc30 0
## main osc enable
mww 0xfffffc20 0x0000ff01
## MC_PUP
mww 0xFFFFFF50 0x00000000
## MC_PUER: Memory controller protection unit disable
mww 0xFFFFFF54 0x00000000
## EBI_CFGR
mww 0xFFFFFF64 0x00000000
## SMC2_CSR[0]: 16bit, 2 TDF, 4 WS
mww 0xFFFFFF70 0x00003284
## Init Clocks
## CKGR_PLLAR
mww 0xFFFFFC28 0x2000BF05
## PLLAR: 179,712000 MHz for PCK
mww 0xFFFFFC28 0x20263E04
sleep 100
## PMC_MCKR
mww 0xFFFFFC30 0x00000100
sleep 100
## ;MCKR : PCK/3 = MCK Master Clock = 59,904000MHz from PLLA
mww 0xFFFFFC30 0x00000202
sleep 100
#========================================
# CPU now runs at 180mhz
# SYS runs at 60mhz.
adapter_khz 40000
#========================================
## Init SDRAM
## PIOC_ASR: Configure PIOC as peripheral (D16/D31)
mww 0xFFFFF870 0xFFFF0000
## PIOC_BSR:
mww 0xFFFFF874 0x00000000
## PIOC_PDR:
mww 0xFFFFF804 0xFFFF0000
## EBI_CSA : CS1=SDRAM
mww 0xFFFFFF60 0x00000002
## EBI_CFGR:
mww 0xFFFFFF64 0x00000000
## SDRC_CR :
mww 0xFFFFFF98 0x2188c155
## SDRC_MR : Precharge All
mww 0xFFFFFF90 0x00000002
## access SDRAM
mww 0x20000000 0x00000000
## SDRC_MR : Refresh
mww 0xFFFFFF90 0x00000004
## access SDRAM
mww 0x20000000 0x00000000
## access SDRAM
mww 0x20000000 0x00000000
## access SDRAM
mww 0x20000000 0x00000000
## access SDRAM
mww 0x20000000 0x00000000
## access SDRAM
mww 0x20000000 0x00000000
## access SDRAM
mww 0x20000000 0x00000000
## access SDRAM
mww 0x20000000 0x00000000
## access SDRAM
mww 0x20000000 0x00000000
## SDRC_MR : Load Mode Register
mww 0xFFFFFF90 0x00000003
## access SDRAM
mww 0x20000080 0x00000000
## SDRC_TR : Write refresh rate
mww 0xFFFFFF94 0x000002E0
## access SDRAM
mww 0x20000000 0x00000000
## SDRC_MR : Normal Mode
mww 0xFFFFFF90 0x00000000
## access SDRAM
mww 0x20000000 0x00000000
}