bcm2835gpio: Add SWD support, Raspberry Pi 2 support.

Added support for SWD transport similar to sysfsgpio driver.
Added configurable peripheral base address to support Raspberry Pi 2.

Change-Id: If76d45fbe74ce49f1f22af72e5f246e973237e04
Signed-off-by: Christoph Pittracher <pitt@segfault.info>
Reviewed-on: http://openocd.zylin.com/2802
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
__archive__
Christoph Pittracher 2015-06-04 09:25:10 +02:00 committed by Spencer Oliver
parent 33d220d10a
commit e3f8db54e6
3 changed files with 202 additions and 9 deletions

View File

@ -30,10 +30,10 @@
#include <sys/mman.h>
#define BCM2835_PERI_BASE 0x20000000
#define BCM2835_GPIO_BASE (BCM2835_PERI_BASE + 0x200000) /* GPIO controller */
uint32_t bcm2835_peri_base = 0x20000000;
#define BCM2835_GPIO_BASE (bcm2835_peri_base + 0x200000) /* GPIO controller */
#define BCM2835_PADS_GPIO_0_27 (BCM2835_PERI_BASE + 0x100000)
#define BCM2835_PADS_GPIO_0_27 (bcm2835_peri_base + 0x100000)
#define BCM2835_PADS_GPIO_0_27_OFFSET (0x2c / 4)
/* GPIO setup macros */
@ -55,6 +55,9 @@ static int bcm2835gpio_read(void);
static void bcm2835gpio_write(int tck, int tms, int tdi);
static void bcm2835gpio_reset(int trst, int srst);
static int bcm2835_swdio_read(void);
static void bcm2835_swdio_drive(bool is_output);
static int bcm2835gpio_init(void);
static int bcm2835gpio_quit(void);
@ -62,6 +65,8 @@ static struct bitbang_interface bcm2835gpio_bitbang = {
.read = bcm2835gpio_read,
.write = bcm2835gpio_write,
.reset = bcm2835gpio_reset,
.swdio_read = bcm2835_swdio_read,
.swdio_drive = bcm2835_swdio_drive,
.blink = NULL
};
@ -78,6 +83,10 @@ static int trst_gpio = -1;
static int trst_gpio_mode;
static int srst_gpio = -1;
static int srst_gpio_mode;
static int swclk_gpio = -1;
static int swclk_gpio_mode;
static int swdio_gpio = -1;
static int swdio_gpio_mode;
/* Transition delay coefficients */
static int speed_coeff = 113714;
@ -101,6 +110,18 @@ static void bcm2835gpio_write(int tck, int tms, int tdi)
asm volatile ("");
}
static void bcm2835gpio_swd_write(int tck, int tms, int tdi)
{
uint32_t set = tck<<swclk_gpio | tdi<<swdio_gpio;
uint32_t clear = !tck<<swclk_gpio | !tdi<<swdio_gpio;
GPIO_SET = set;
GPIO_CLR = clear;
for (unsigned int i = 0; i < jtag_delay; i++)
asm volatile ("");
}
/* (1) assert or (0) deassert reset lines */
static void bcm2835gpio_reset(int trst, int srst)
{
@ -121,6 +142,19 @@ static void bcm2835gpio_reset(int trst, int srst)
GPIO_CLR = clear;
}
static void bcm2835_swdio_drive(bool is_output)
{
if (is_output)
OUT_GPIO(swdio_gpio);
else
INP_GPIO(swdio_gpio);
}
static int bcm2835_swdio_read(void)
{
return !!(GPIO_LEV & 1 << swdio_gpio);
}
static int bcm2835gpio_khz(int khz, int *jtag_speed)
{
if (!khz) {
@ -222,6 +256,40 @@ COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionum_trst)
return ERROR_OK;
}
COMMAND_HANDLER(bcm2835gpio_handle_swd_gpionums)
{
if (CMD_ARGC == 2) {
COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swclk_gpio);
COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], swdio_gpio);
} else if (CMD_ARGC != 0) {
return ERROR_COMMAND_SYNTAX_ERROR;
}
command_print(CMD_CTX,
"BCM2835 GPIO nums: swclk = %d, swdio = %d",
swclk_gpio, swdio_gpio);
return ERROR_OK;
}
COMMAND_HANDLER(bcm2835gpio_handle_swd_gpionum_swclk)
{
if (CMD_ARGC == 1)
COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swclk_gpio);
command_print(CMD_CTX, "BCM2835 num: swclk = %d", swclk_gpio);
return ERROR_OK;
}
COMMAND_HANDLER(bcm2835gpio_handle_swd_gpionum_swdio)
{
if (CMD_ARGC == 1)
COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swdio_gpio);
command_print(CMD_CTX, "BCM2835 num: swdio = %d", swdio_gpio);
return ERROR_OK;
}
COMMAND_HANDLER(bcm2835gpio_handle_speed_coeffs)
{
if (CMD_ARGC == 2) {
@ -231,6 +299,13 @@ COMMAND_HANDLER(bcm2835gpio_handle_speed_coeffs)
return ERROR_OK;
}
COMMAND_HANDLER(bcm2835gpio_handle_peripheral_base)
{
if (CMD_ARGC == 1)
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], bcm2835_peri_base);
return ERROR_OK;
}
static const struct command_registration bcm2835gpio_command_handlers[] = {
{
.name = "bcm2835gpio_jtag_nums",
@ -263,6 +338,25 @@ static const struct command_registration bcm2835gpio_command_handlers[] = {
.mode = COMMAND_CONFIG,
.help = "gpio number for tdi.",
},
{
.name = "bcm2835gpio_swd_nums",
.handler = &bcm2835gpio_handle_swd_gpionums,
.mode = COMMAND_CONFIG,
.help = "gpio numbers for swclk, swdio. (in that order)",
.usage = "(swclk swdio)* ",
},
{
.name = "bcm2835gpio_swclk_num",
.handler = &bcm2835gpio_handle_swd_gpionum_swclk,
.mode = COMMAND_CONFIG,
.help = "gpio number for swclk.",
},
{
.name = "bcm2835gpio_swdio_num",
.handler = &bcm2835gpio_handle_swd_gpionum_swdio,
.mode = COMMAND_CONFIG,
.help = "gpio number for swdio.",
},
{
.name = "bcm2835gpio_srst_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_srst,
@ -281,14 +375,24 @@ static const struct command_registration bcm2835gpio_command_handlers[] = {
.mode = COMMAND_CONFIG,
.help = "SPEED_COEFF and SPEED_OFFSET for delay calculations.",
},
{
.name = "bcm2835gpio_peripheral_base",
.handler = &bcm2835gpio_handle_peripheral_base,
.mode = COMMAND_CONFIG,
.help = "peripheral base to access GPIOs (RPi1 0x20000000, RPi2 0x3F000000).",
},
COMMAND_REGISTRATION_DONE
};
static const char * const bcm2835_transports[] = { "jtag", "swd", NULL };
struct jtag_interface bcm2835gpio_interface = {
.name = "bcm2835gpio",
.supported = DEBUG_CAP_TMS_SEQ,
.execute_queue = bitbang_execute_queue,
.transports = jtag_only,
.transports = bcm2835_transports,
.swd = &bitbang_swd,
.speed = bcm2835gpio_speed,
.khz = bcm2835gpio_khz,
.speed_div = bcm2835gpio_speed_div,
@ -297,15 +401,49 @@ struct jtag_interface bcm2835gpio_interface = {
.quit = bcm2835gpio_quit,
};
static bool bcm2835gpio_jtag_mode_possible(void)
{
if (!is_gpio_valid(tck_gpio))
return 0;
if (!is_gpio_valid(tms_gpio))
return 0;
if (!is_gpio_valid(tdi_gpio))
return 0;
if (!is_gpio_valid(tdo_gpio))
return 0;
return 1;
}
static bool bcm2835gpio_swd_mode_possible(void)
{
if (!is_gpio_valid(swclk_gpio))
return 0;
if (!is_gpio_valid(swdio_gpio))
return 0;
return 1;
}
static int bcm2835gpio_init(void)
{
bitbang_interface = &bcm2835gpio_bitbang;
if (!is_gpio_valid(tdo_gpio) || !is_gpio_valid(tdi_gpio) ||
!is_gpio_valid(tck_gpio) || !is_gpio_valid(tms_gpio) ||
(trst_gpio != -1 && !is_gpio_valid(trst_gpio)) ||
(srst_gpio != -1 && !is_gpio_valid(srst_gpio)))
LOG_INFO("BCM2835 GPIO JTAG/SWD bitbang driver");
if (bcm2835gpio_jtag_mode_possible()) {
if (bcm2835gpio_swd_mode_possible())
LOG_INFO("JTAG and SWD modes enabled");
else
LOG_INFO("JTAG only mode enabled (specify swclk and swdio gpio to add SWD mode)");
if (!is_gpio_valid(trst_gpio) && !is_gpio_valid(srst_gpio)) {
LOG_ERROR("Require at least one of trst or srst gpios to be specified");
return ERROR_JTAG_INIT_FAILED;
}
} else if (bcm2835gpio_swd_mode_possible()) {
LOG_INFO("SWD only mode enabled (specify tck, tms, tdi and tdo gpios to add JTAG mode)");
} else {
LOG_ERROR("Require tck, tms, tdi and tdo gpios for JTAG mode and/or swclk and swdio gpio for SWD mode");
return ERROR_JTAG_INIT_FAILED;
}
dev_mem_fd = open("/dev/mem", O_RDWR | O_SYNC);
if (dev_mem_fd < 0) {
@ -339,18 +477,22 @@ static int bcm2835gpio_init(void)
tdi_gpio_mode = MODE_GPIO(tdi_gpio);
tck_gpio_mode = MODE_GPIO(tck_gpio);
tms_gpio_mode = MODE_GPIO(tms_gpio);
swclk_gpio_mode = MODE_GPIO(swclk_gpio);
swdio_gpio_mode = MODE_GPIO(swdio_gpio);
/*
* Configure TDO as an input, and TDI, TCK, TMS, TRST, SRST
* as outputs. Drive TDI and TCK low, and TMS/TRST/SRST high.
*/
INP_GPIO(tdo_gpio);
GPIO_CLR = 1<<tdi_gpio | 1<<tck_gpio;
GPIO_CLR = 1<<tdi_gpio | 1<<tck_gpio | 1<<swdio_gpio | 1<<swclk_gpio;
GPIO_SET = 1<<tms_gpio;
OUT_GPIO(tdi_gpio);
OUT_GPIO(tck_gpio);
OUT_GPIO(tms_gpio);
OUT_GPIO(swclk_gpio);
OUT_GPIO(swdio_gpio);
if (trst_gpio != -1) {
trst_gpio_mode = MODE_GPIO(trst_gpio);
GPIO_SET = 1 << trst_gpio;
@ -366,6 +508,11 @@ static int bcm2835gpio_init(void)
"tdo %d trst %d srst %d", tck_gpio_mode, tms_gpio_mode,
tdi_gpio_mode, tdo_gpio_mode, trst_gpio_mode, srst_gpio_mode);
if (swd_mode) {
bcm2835gpio_bitbang.write = bcm2835gpio_swd_write;
bitbang_switch_to_swd();
}
return ERROR_OK;
}
@ -375,6 +522,8 @@ static int bcm2835gpio_quit(void)
SET_MODE_GPIO(tdi_gpio, tdi_gpio_mode);
SET_MODE_GPIO(tck_gpio, tck_gpio_mode);
SET_MODE_GPIO(tms_gpio, tms_gpio_mode);
SET_MODE_GPIO(swclk_gpio, swclk_gpio_mode);
SET_MODE_GPIO(swdio_gpio, swdio_gpio_mode);
if (trst_gpio != -1)
SET_MODE_GPIO(trst_gpio, trst_gpio_mode);
if (srst_gpio != -1)

View File

@ -10,6 +10,8 @@
interface bcm2835gpio
bcm2835gpio_peripheral_base 0x20000000
# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
# bcm2835gpio_speed SPEED_COEFF SPEED_OFFSET

View File

@ -0,0 +1,42 @@
#
# Config for using Raspberry Pi's expansion header
#
# This is best used with a fast enough buffer but also
# is suitable for direct connection if the target voltage
# matches RPi's 3.3V and the cable is short enough.
#
# Do not forget the GND connection, pin 6 of the expansion header.
#
interface bcm2835gpio
bcm2835gpio_peripheral_base 0x3F000000
# Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
# These depend on system clock, calibrated for stock 700MHz
# bcm2835gpio_speed SPEED_COEFF SPEED_OFFSET
bcm2835gpio_speed_coeffs 146203 36
# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
# Header pin numbers: 23 22 19 21
# bcm2835gpio_jtag_nums 11 25 10 9
# or if you have both connected,
# reset_config trst_and_srst srst_push_pull
# Each of the SWD lines need a gpio number set: swclk swdio
# Header pin numbers: 22 18
bcm2835gpio_swd_nums 25 24
# If you define trst or srst, use appropriate reset_config
# Header pin numbers: TRST - 26, SRST - 18
# bcm2835gpio_trst_num 7
# reset_config trst_only
bcm2835gpio_srst_num 18
reset_config srst_only srst_push_pull
# or if you have both connected,
# reset_config trst_and_srst srst_push_pull