tcl/board: fix all the remaining boards that were sourcing ft2232 configs

This was reported in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751372 .

Change-Id: I258f3d40593ff2966ce3ca61c13a23699d1b162f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2230
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
__archive__
Paul Fertser 2014-07-28 22:10:45 +04:00 committed by Andreas Fritiofson
parent 91e47f3ab8
commit e2b1f06f93
12 changed files with 12 additions and 12 deletions

View File

@ -11,7 +11,7 @@
# include the FT2232 interface config for on-board JTAG interface # include the FT2232 interface config for on-board JTAG interface
# NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional! # NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional!
# so is using in JTAG mode, as done here. # so is using in JTAG mode, as done here.
source [find interface/luminary.cfg] source [find interface/ftdi/luminary.cfg]
# include the target config # include the target config
set WORKAREASIZE 0x2000 set WORKAREASIZE 0x2000

View File

@ -6,7 +6,7 @@
# NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional! # NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional!
# so is using it in JTAG mode, as done here. # so is using it in JTAG mode, as done here.
source [find interface/luminary.cfg] source [find interface/ftdi/luminary.cfg]
# 20k working area # 20k working area
set WORKAREASIZE 0x4000 set WORKAREASIZE 0x4000

View File

@ -6,7 +6,7 @@
# NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional! # NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional!
# so is using it in JTAG mode, as done here. # so is using it in JTAG mode, as done here.
source [find interface/luminary.cfg] source [find interface/ftdi/luminary.cfg]
# 20k working area # 20k working area
set WORKAREASIZE 0x5000 set WORKAREASIZE 0x5000

View File

@ -6,7 +6,7 @@
# NOTE: newer 811-EK boards (rev C and above) shouldn't use this. # NOTE: newer 811-EK boards (rev C and above) shouldn't use this.
# use board/ek-lm3s811.cfg # use board/ek-lm3s811.cfg
source [find interface/luminary-lm3s811.cfg] source [find interface/ftdi/luminary-lm3s811.cfg]
# include the target config # include the target config
set WORKAREASIZE 0x2000 set WORKAREASIZE 0x2000

View File

@ -7,7 +7,7 @@
# NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional! # NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional!
# so is using it in JTAG mode, as done here. # so is using it in JTAG mode, as done here.
# NOTE: older '811-EK boards (before rev C) shouldn't use this. # NOTE: older '811-EK boards (before rev C) shouldn't use this.
source [find interface/luminary.cfg] source [find interface/ftdi/luminary.cfg]
# include the target config # include the target config
set WORKAREASIZE 0x2000 set WORKAREASIZE 0x2000

View File

@ -6,7 +6,7 @@
# NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional! # NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional!
# so is using it in JTAG mode, as done here. # so is using it in JTAG mode, as done here.
source [find interface/luminary.cfg] source [find interface/ftdi/luminary.cfg]
# 64k working area # 64k working area
set WORKAREASIZE 0x10000 set WORKAREASIZE 0x10000

View File

@ -7,7 +7,7 @@
# NOTE: using the bundled FT2232 JTAG/SWD/SWO interface is optional! # NOTE: using the bundled FT2232 JTAG/SWD/SWO interface is optional!
# so is using in JTAG mode, as done here. # so is using in JTAG mode, as done here.
source [find interface/luminary-icdi.cfg] source [find interface/ftdi/luminary-icdi.cfg]
set WORKAREASIZE 0x4000 set WORKAREASIZE 0x4000
set CHIPNAME lm3s9b9x set CHIPNAME lm3s9b9x

View File

@ -6,7 +6,7 @@
# NOTE: using the bundled FT2232 JTAG/SWD/SWO interface is optional! # NOTE: using the bundled FT2232 JTAG/SWD/SWO interface is optional!
# so is using in JTAG mode, as done here. # so is using in JTAG mode, as done here.
source [find interface/luminary-icdi.cfg] source [find interface/ftdi/luminary-icdi.cfg]
# 64k working area # 64k working area
set WORKAREASIZE 0x10000 set WORKAREASIZE 0x10000

View File

@ -2,7 +2,7 @@
reset_config trst_and_srst reset_config trst_and_srst
source [find interface/stm32-stick.cfg] source [find interface/ftdi/stm32-stick.cfg]
set CHIPNAME stm32_hitex set CHIPNAME stm32_hitex
source [find target/stm32f1x.cfg] source [find target/stm32f1x.cfg]

View File

@ -2,7 +2,7 @@
# http://www.hitex.com/index.php?id=383 # http://www.hitex.com/index.php?id=383
# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2. # This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
source [find interface/hitex_str9-comstick.cfg] source [find interface/ftdi/hitex_str9-comstick.cfg]
# set jtag speed # set jtag speed
adapter_khz 3000 adapter_khz 3000

View File

@ -1,6 +1,6 @@
# Marvell OpenRD # Marvell OpenRD
source [find interface/openrd.cfg] source [find interface/ftdi/openrd.cfg]
source [find target/feroceon.cfg] source [find target/feroceon.cfg]
$_TARGETNAME configure \ $_TARGETNAME configure \

View File

@ -1,6 +1,6 @@
# Marvell SheevaPlug # Marvell SheevaPlug
source [find interface/sheevaplug.cfg] source [find interface/ftdi/sheevaplug.cfg]
source [find target/feroceon.cfg] source [find target/feroceon.cfg]
$_TARGETNAME configure \ $_TARGETNAME configure \