diff --git a/tcl/board/tp-link_tl-mr3020.cfg b/tcl/board/tp-link_tl-mr3020.cfg
index 7e040b325..48fb69893 100644
--- a/tcl/board/tp-link_tl-mr3020.cfg
+++ b/tcl/board/tp-link_tl-mr3020.cfg
@@ -1,39 +1,5 @@
 source [find target/atheros_ar9331.cfg]
 
-proc ar9331_25mhz_pll_init {} {
-	mww 0xb8050008 0x00018004	;# bypass PLL; AHB_POST_DIV - ratio 4
-	mww 0xb8050004 0x00000352	;# 34000(ns)/40ns(25MHz) = 0x352 (850)
-	mww 0xb8050000 0x40818000	;# Power down control for CPU PLL
-					;# OUTDIV | REFDIV | DIV_INT
-	mww 0xb8050010 0x001003e8	;# CPU PLL Dither FRAC Register
-					;# (disabled?)
-	mww 0xb8050000 0x00818000	;# Power on | OUTDIV | REFDIV | DIV_INT
-	mww 0xb8050008 0x00008000	;# remove bypass;
-					;# AHB_POST_DIV - ratio 2
-}
-
-proc ar9331_ddr1_init {} {
-	mww 0xb8000000 0x7fbc8cd0       ;# DDR_CONFIG - lots of DRAM confs
-	mww 0xb8000004 0x9dd0e6a8	;# DDR_CONFIG2 - more DRAM confs
-
-	mww 0xb8000010 0x8	;# Forces a PRECHARGE ALL cycle
-	mww 0xb8000008 0x133	;# mode reg: 0x133 - default
-	mww 0xb8000010 0x1	;# Forces an MRS update cycl
-	mww 0xb800000c 0x2	;# Extended mode register value.
-				;# default 0x2 - Reset to weak driver, DLL on
-	mww 0xb8000010 0x2	;# Forces an EMRS update cycle
-	mww 0xb8000010 0x8	;# Forces a PRECHARGE ALL cycle
-	mww 0xb8000008 0x33	;# mode reg: remove some bit?
-	mww 0xb8000010 0x1	;# Forces an MRS update cycl
-	mww 0xb8000014 0x4186	;# enable refres: bit(14) - set refresh rate
-	mww 0xb800001c 0x8	;# This register is used along with DQ Lane 0,
-				;# DQ[7:0], DQS_0
-	mww 0xb8000020 0x9	;# This register is used along with DQ Lane 1,
-				;# DQ[15:8], DQS_1.
-	mww 0xb8000018 0xff	;# DDR read and capture bit mask.
-				;# Each bit represents a cycle of valid data.
-}
-
 $_TARGETNAME configure -event reset-init {
 	ar9331_25mhz_pll_init
 	sleep 1
diff --git a/tcl/target/atheros_ar9331.cfg b/tcl/target/atheros_ar9331.cfg
index c5609bb1d..cd6918339 100644
--- a/tcl/target/atheros_ar9331.cfg
+++ b/tcl/target/atheros_ar9331.cfg
@@ -14,3 +14,37 @@ jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME mips_m4k -endian big -chain-position $_TARGETNAME
+
+proc ar9331_25mhz_pll_init {} {
+	mww 0xb8050008 0x00018004	;# bypass PLL; AHB_POST_DIV - ratio 4
+	mww 0xb8050004 0x00000352	;# 34000(ns)/40ns(25MHz) = 0x352 (850)
+	mww 0xb8050000 0x40818000	;# Power down control for CPU PLL
+					;# OUTDIV | REFDIV | DIV_INT
+	mww 0xb8050010 0x001003e8	;# CPU PLL Dither FRAC Register
+					;# (disabled?)
+	mww 0xb8050000 0x00818000	;# Power on | OUTDIV | REFDIV | DIV_INT
+	mww 0xb8050008 0x00008000	;# remove bypass;
+					;# AHB_POST_DIV - ratio 2
+}
+
+proc ar9331_ddr1_init {} {
+	mww 0xb8000000 0x7fbc8cd0       ;# DDR_CONFIG - lots of DRAM confs
+	mww 0xb8000004 0x9dd0e6a8	;# DDR_CONFIG2 - more DRAM confs
+
+	mww 0xb8000010 0x8	;# Forces a PRECHARGE ALL cycle
+	mww 0xb8000008 0x133	;# mode reg: 0x133 - default
+	mww 0xb8000010 0x1	;# Forces an MRS update cycl
+	mww 0xb800000c 0x2	;# Extended mode register value.
+				;# default 0x2 - Reset to weak driver, DLL on
+	mww 0xb8000010 0x2	;# Forces an EMRS update cycle
+	mww 0xb8000010 0x8	;# Forces a PRECHARGE ALL cycle
+	mww 0xb8000008 0x33	;# mode reg: remove some bit?
+	mww 0xb8000010 0x1	;# Forces an MRS update cycl
+	mww 0xb8000014 0x4186	;# enable refres: bit(14) - set refresh rate
+	mww 0xb800001c 0x8	;# This register is used along with DQ Lane 0,
+				;# DQ[7:0], DQS_0
+	mww 0xb8000020 0x9	;# This register is used along with DQ Lane 1,
+				;# DQ[15:8], DQS_1.
+	mww 0xb8000018 0xff	;# DDR read and capture bit mask.
+				;# Each bit represents a cycle of valid data.
+}