- add missing svn props from 1323 commit
git-svn-id: svn://svn.berlios.de/openocd/trunk@1324 b42882b7-edfa-0310-969c-e2dbd0fdcd60__archive__
ntfreak
parent
2e0f28149d
commit
cb3f970b6c
|
|
@ -1,101 +1,101 @@
|
||||||
# The IMX31PDK eval board has a single IMX31 chip
|
# The IMX31PDK eval board has a single IMX31 chip
|
||||||
source [find target/imx31.cfg]
|
source [find target/imx31.cfg]
|
||||||
$_TARGETNAME configure -event gdb-attach { reset init }
|
$_TARGETNAME configure -event gdb-attach { reset init }
|
||||||
$_TARGETNAME configure -event reset-init { imx31pdk_init }
|
$_TARGETNAME configure -event reset-init { imx31pdk_init }
|
||||||
|
|
||||||
proc imx31pdk_init { } {
|
proc imx31pdk_init { } {
|
||||||
# This setup puts RAM at 0x80000000
|
# This setup puts RAM at 0x80000000
|
||||||
|
|
||||||
# reset the board correctly
|
# reset the board correctly
|
||||||
reset run
|
reset run
|
||||||
reset halt
|
reset halt
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# Init CCM
|
# Init CCM
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0x53FC0000 0x040
|
mww 0x53FC0000 0x040
|
||||||
mww 0x53F80000 0x074B0B7D
|
mww 0x53F80000 0x074B0B7D
|
||||||
|
|
||||||
sleep 100
|
sleep 100
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
|
# 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0x53F80004 0xFF871D50
|
mww 0x53F80004 0xFF871D50
|
||||||
mww 0x53F80010 0x00271C1B
|
mww 0x53F80010 0x00271C1B
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# Configure CPLD on CS5
|
# Configure CPLD on CS5
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0xb8002050 0x0000DCF6
|
mww 0xb8002050 0x0000DCF6
|
||||||
mww 0xb8002054 0x444A4541
|
mww 0xb8002054 0x444A4541
|
||||||
mww 0xb8002058 0x44443302
|
mww 0xb8002058 0x44443302
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# SDCLK
|
# SDCLK
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0x43FAC26C 0
|
mww 0x43FAC26C 0
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# CAS
|
# CAS
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0x43FAC270 0
|
mww 0x43FAC270 0
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# RAS
|
# RAS
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0x43FAC274 0
|
mww 0x43FAC274 0
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# CS2 (CSD0)
|
# CS2 (CSD0)
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0x43FAC27C 0x1000
|
mww 0x43FAC27C 0x1000
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# DQM3
|
# DQM3
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0x43FAC284 0
|
mww 0x43FAC284 0
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
|
# DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0x43FAC288 0
|
mww 0x43FAC288 0
|
||||||
mww 0x43FAC28C 0
|
mww 0x43FAC28C 0
|
||||||
mww 0x43FAC290 0
|
mww 0x43FAC290 0
|
||||||
mww 0x43FAC294 0
|
mww 0x43FAC294 0
|
||||||
mww 0x43FAC298 0
|
mww 0x43FAC298 0
|
||||||
mww 0x43FAC29C 0
|
mww 0x43FAC29C 0
|
||||||
mww 0x43FAC2A0 0
|
mww 0x43FAC2A0 0
|
||||||
mww 0x43FAC2A4 0
|
mww 0x43FAC2A4 0
|
||||||
mww 0x43FAC2A8 0
|
mww 0x43FAC2A8 0
|
||||||
mww 0x43FAC2AC 0
|
mww 0x43FAC2AC 0
|
||||||
mww 0x43FAC2B0 0
|
mww 0x43FAC2B0 0
|
||||||
mww 0x43FAC2B4 0
|
mww 0x43FAC2B4 0
|
||||||
mww 0x43FAC2B8 0
|
mww 0x43FAC2B8 0
|
||||||
mww 0x43FAC2BC 0
|
mww 0x43FAC2BC 0
|
||||||
mww 0x43FAC2C0 0
|
mww 0x43FAC2C0 0
|
||||||
mww 0x43FAC2C4 0
|
mww 0x43FAC2C4 0
|
||||||
mww 0x43FAC2C8 0
|
mww 0x43FAC2C8 0
|
||||||
mww 0x43FAC2CC 0
|
mww 0x43FAC2CC 0
|
||||||
mww 0x43FAC2D0 0
|
mww 0x43FAC2D0 0
|
||||||
mww 0x43FAC2D4 0
|
mww 0x43FAC2D4 0
|
||||||
mww 0x43FAC2D8 0
|
mww 0x43FAC2D8 0
|
||||||
mww 0x43FAC2DC 0
|
mww 0x43FAC2DC 0
|
||||||
|
|
||||||
# ========================================
|
# ========================================
|
||||||
# Initialization script for 32 bit DDR on MX31 PDK
|
# Initialization script for 32 bit DDR on MX31 PDK
|
||||||
# ========================================
|
# ========================================
|
||||||
mww 0xB8001010 0x00000004
|
mww 0xB8001010 0x00000004
|
||||||
mww 0xB8001004 0x006ac73a
|
mww 0xB8001004 0x006ac73a
|
||||||
mww 0xB8001000 0x92100000
|
mww 0xB8001000 0x92100000
|
||||||
mww 0x80000f00 0x12344321
|
mww 0x80000f00 0x12344321
|
||||||
mww 0xB8001000 0xa2100000
|
mww 0xB8001000 0xa2100000
|
||||||
mww 0x80000000 0x12344321
|
mww 0x80000000 0x12344321
|
||||||
mww 0x80000000 0x12344321
|
mww 0x80000000 0x12344321
|
||||||
mww 0xB8001000 0xb2100000
|
mww 0xB8001000 0xb2100000
|
||||||
mwb 0x80000033 0xda
|
mwb 0x80000033 0xda
|
||||||
mwb 0x81000000 0xff
|
mwb 0x81000000 0xff
|
||||||
mww 0xB8001000 0x82226080
|
mww 0xB8001000 0x82226080
|
||||||
mww 0x80000000 0xDEADBEEF
|
mww 0x80000000 0xDEADBEEF
|
||||||
mww 0xB8001010 0x0000000c
|
mww 0xB8001010 0x0000000c
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -1,42 +1,42 @@
|
||||||
# This will make the test program for a Freescale iMX27 ADS Board with a
|
# This will make the test program for a Freescale iMX27 ADS Board with a
|
||||||
# FreeScale iMX27 CPU
|
# FreeScale iMX27 CPU
|
||||||
|
|
||||||
PROC=arm
|
PROC=arm
|
||||||
TYPE=926ejs-linux
|
TYPE=926ejs-linux
|
||||||
LDSCRIPT=ldscript
|
LDSCRIPT=ldscript
|
||||||
|
|
||||||
PATH:=/opt/freescale/usr/local/gcc-4.1.1-glibc-2.4-nptl-sf-1/arm-926ejs-linux/bin/:$(PATH)
|
PATH:=/opt/freescale/usr/local/gcc-4.1.1-glibc-2.4-nptl-sf-1/arm-926ejs-linux/bin/:$(PATH)
|
||||||
CC=$(PROC)-$(TYPE)-gcc
|
CC=$(PROC)-$(TYPE)-gcc
|
||||||
AS=$(PROC)-$(TYPE)-as
|
AS=$(PROC)-$(TYPE)-as
|
||||||
AR=$(PROC)-$(TYPE)-ar
|
AR=$(PROC)-$(TYPE)-ar
|
||||||
LD=$(PROC)-$(TYPE)-ld
|
LD=$(PROC)-$(TYPE)-ld
|
||||||
NM=$(PROC)-$(TYPE)-nm
|
NM=$(PROC)-$(TYPE)-nm
|
||||||
OBJDUMP=$(PROC)-$(TYPE)-objdump
|
OBJDUMP=$(PROC)-$(TYPE)-objdump
|
||||||
CFLAGS= -g -c -mcpu=arm920t
|
CFLAGS= -g -c -mcpu=arm920t
|
||||||
|
|
||||||
all: test.elf
|
all: test.elf
|
||||||
|
|
||||||
# Make a little endian image:
|
# Make a little endian image:
|
||||||
# In Eclipse, add the line :
|
# In Eclipse, add the line :
|
||||||
# source gdbinit
|
# source gdbinit
|
||||||
# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)
|
# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)
|
||||||
# To start gdb from a window use : arm-elf-gdb --command=gdbinit
|
# To start gdb from a window use : arm-elf-gdb --command=gdbinit
|
||||||
test.elf: test.c Makefile ldscript crt0.S
|
test.elf: test.c Makefile ldscript crt0.S
|
||||||
$(CC) $(CFLAGS) -o crt0.o crt0.S
|
$(CC) $(CFLAGS) -o crt0.o crt0.S
|
||||||
$(CC) $(CFLAGS) -o test.o test.c
|
$(CC) $(CFLAGS) -o test.o test.c
|
||||||
$(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o
|
$(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o
|
||||||
$(NM) test.elf
|
$(NM) test.elf
|
||||||
|
|
||||||
|
|
||||||
dump:
|
dump:
|
||||||
$(OBJDUMP) --all-headers test.elf
|
$(OBJDUMP) --all-headers test.elf
|
||||||
|
|
||||||
dump_test:
|
dump_test:
|
||||||
$(OBJDUMP) --disassemble test.elf
|
$(OBJDUMP) --disassemble test.elf
|
||||||
|
|
||||||
dump_full:
|
dump_full:
|
||||||
$(OBJDUMP) --full-contents test.elf
|
$(OBJDUMP) --full-contents test.elf
|
||||||
|
|
||||||
clean:
|
clean:
|
||||||
-/bin/rm -f *.o *~ test.elf
|
-/bin/rm -f *.o *~ test.elf
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,47 +1,47 @@
|
||||||
/* Sample initialization file */
|
/* Sample initialization file */
|
||||||
|
|
||||||
.extern main
|
.extern main
|
||||||
.extern exit
|
.extern exit
|
||||||
|
|
||||||
/* .text is used instead of .section .text so it works with arm-aout too. */
|
/* .text is used instead of .section .text so it works with arm-aout too. */
|
||||||
.text
|
.text
|
||||||
.code 32
|
.code 32
|
||||||
.align 0
|
.align 0
|
||||||
|
|
||||||
.global _mainCRTStartup
|
.global _mainCRTStartup
|
||||||
.global _start
|
.global _start
|
||||||
.global start
|
.global start
|
||||||
start:
|
start:
|
||||||
_start:
|
_start:
|
||||||
_mainCRTStartup:
|
_mainCRTStartup:
|
||||||
|
|
||||||
/* Start by setting up a stack */
|
/* Start by setting up a stack */
|
||||||
/* Set up the stack pointer to end of bss */
|
/* Set up the stack pointer to end of bss */
|
||||||
ldr r3, .LC2
|
ldr r3, .LC2
|
||||||
mov sp, r3
|
mov sp, r3
|
||||||
|
|
||||||
sub sl, sp, #512 /* Still assumes 512 bytes below sl */
|
sub sl, sp, #512 /* Still assumes 512 bytes below sl */
|
||||||
|
|
||||||
mov a2, #0 /* Second arg: fill value */
|
mov a2, #0 /* Second arg: fill value */
|
||||||
mov fp, a2 /* Null frame pointer */
|
mov fp, a2 /* Null frame pointer */
|
||||||
mov r7, a2 /* Null frame pointer for Thumb */
|
mov r7, a2 /* Null frame pointer for Thumb */
|
||||||
|
|
||||||
ldr a1, .LC1 /* First arg: start of memory block */
|
ldr a1, .LC1 /* First arg: start of memory block */
|
||||||
ldr a3, .LC2 /* Second arg: end of memory block */
|
ldr a3, .LC2 /* Second arg: end of memory block */
|
||||||
sub a3, a3, a1 /* Third arg: length of block */
|
sub a3, a3, a1 /* Third arg: length of block */
|
||||||
|
|
||||||
mov r0, #0 /* no arguments */
|
mov r0, #0 /* no arguments */
|
||||||
mov r1, #0 /* no argv either */
|
mov r1, #0 /* no argv either */
|
||||||
|
|
||||||
bl main
|
bl main
|
||||||
bl exit /* Should not return */
|
bl exit /* Should not return */
|
||||||
|
|
||||||
/* For Thumb, constants must be after the code since only
|
/* For Thumb, constants must be after the code since only
|
||||||
positive offsets are supported for PC relative addresses. */
|
positive offsets are supported for PC relative addresses. */
|
||||||
|
|
||||||
.align 0
|
.align 0
|
||||||
.LC1:
|
.LC1:
|
||||||
.word __bss_start__
|
.word __bss_start__
|
||||||
.LC2:
|
.LC2:
|
||||||
.word __bss_end__
|
.word __bss_end__
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,36 +1,36 @@
|
||||||
echo Script to load ledtest on iMX27ADS.\n
|
echo Script to load ledtest on iMX27ADS.\n
|
||||||
|
|
||||||
# Note: you need to startup openocd with "-f board/imx27ads.cfg"
|
# Note: you need to startup openocd with "-f board/imx27ads.cfg"
|
||||||
# in order to it initialize RAM memory.
|
# in order to it initialize RAM memory.
|
||||||
|
|
||||||
# SETUP GDB :
|
# SETUP GDB :
|
||||||
#
|
#
|
||||||
# Common gdb setup for ARM CPUs
|
# Common gdb setup for ARM CPUs
|
||||||
set complaints 1
|
set complaints 1
|
||||||
set output-radix 10
|
set output-radix 10
|
||||||
set input-radix 10
|
set input-radix 10
|
||||||
set prompt (arm-gdb)
|
set prompt (arm-gdb)
|
||||||
set endian little
|
set endian little
|
||||||
dir .
|
dir .
|
||||||
|
|
||||||
# CONNECT TO TARGET :
|
# CONNECT TO TARGET :
|
||||||
target remote 127.0.0.1:3333
|
target remote 127.0.0.1:3333
|
||||||
|
|
||||||
# LOAD IMAGE :
|
# LOAD IMAGE :
|
||||||
#
|
#
|
||||||
|
|
||||||
# Load the program executable called "u-boot"
|
# Load the program executable called "u-boot"
|
||||||
load test.elf
|
load test.elf
|
||||||
|
|
||||||
# Load the symbols for the program.
|
# Load the symbols for the program.
|
||||||
symbol-file test.elf
|
symbol-file test.elf
|
||||||
|
|
||||||
# RUN TO MAIN :
|
# RUN TO MAIN :
|
||||||
#
|
#
|
||||||
# Set a breakpoint at main().
|
# Set a breakpoint at main().
|
||||||
#b reset
|
#b reset
|
||||||
b main
|
b main
|
||||||
|
|
||||||
# Run to the breakpoint.
|
# Run to the breakpoint.
|
||||||
c
|
c
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,18 +1,18 @@
|
||||||
SECTIONS
|
SECTIONS
|
||||||
{
|
{
|
||||||
. = 0xA0000000;
|
. = 0xA0000000;
|
||||||
.text : { *(.text) }
|
.text : { *(.text) }
|
||||||
.data ALIGN(0x10): { *(.data) }
|
.data ALIGN(0x10): { *(.data) }
|
||||||
.bss ALIGN(0x10): {
|
.bss ALIGN(0x10): {
|
||||||
__bss_start__ = ABSOLUTE(.);
|
__bss_start__ = ABSOLUTE(.);
|
||||||
*(.bss)
|
*(.bss)
|
||||||
. += 0x100;
|
. += 0x100;
|
||||||
}
|
}
|
||||||
__bss_end__ = .;
|
__bss_end__ = .;
|
||||||
PROVIDE (__stack = .);
|
PROVIDE (__stack = .);
|
||||||
_end = .;
|
_end = .;
|
||||||
.debug_info 0 : { *(.debug_info) }
|
.debug_info 0 : { *(.debug_info) }
|
||||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
.debug_line 0 : { *(.debug_line) }
|
.debug_line 0 : { *(.debug_line) }
|
||||||
.debug_frame 0 : { *(.debug_frame) }
|
.debug_frame 0 : { *(.debug_frame) }
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -1,60 +1,60 @@
|
||||||
/***************************************************************************
|
/***************************************************************************
|
||||||
* Copyright (C) 2009 by Alan Carvalho de Assis *
|
* Copyright (C) 2009 by Alan Carvalho de Assis *
|
||||||
* acassis@gmail.com *
|
* acassis@gmail.com *
|
||||||
* *
|
* *
|
||||||
* This program is free software; you can redistribute it and/or modify *
|
* This program is free software; you can redistribute it and/or modify *
|
||||||
* it under the terms of the GNU General Public License as published by *
|
* it under the terms of the GNU General Public License as published by *
|
||||||
* the Free Software Foundation; either version 2 of the License, or *
|
* the Free Software Foundation; either version 2 of the License, or *
|
||||||
* (at your option) any later version. *
|
* (at your option) any later version. *
|
||||||
* *
|
* *
|
||||||
* This program is distributed in the hope that it will be useful, *
|
* This program is distributed in the hope that it will be useful, *
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
||||||
* GNU General Public License for more details. *
|
* GNU General Public License for more details. *
|
||||||
* *
|
* *
|
||||||
* You should have received a copy of the GNU General Public License *
|
* You should have received a copy of the GNU General Public License *
|
||||||
* along with this program; if not, write to the *
|
* along with this program; if not, write to the *
|
||||||
* Free Software Foundation, Inc., *
|
* Free Software Foundation, Inc., *
|
||||||
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
|
||||||
***************************************************************************/
|
***************************************************************************/
|
||||||
|
|
||||||
void delay()
|
void delay()
|
||||||
{
|
{
|
||||||
int i;
|
int i;
|
||||||
for (i = 0; i < 500000; i++);
|
for (i = 0; i < 500000; i++);
|
||||||
}
|
}
|
||||||
|
|
||||||
/* MAIN ARM FUNTION */
|
/* MAIN ARM FUNTION */
|
||||||
int main (void)
|
int main (void)
|
||||||
{
|
{
|
||||||
int i;
|
int i;
|
||||||
volatile unsigned char *ledoff = ((volatile unsigned char *)0xD4000008);
|
volatile unsigned char *ledoff = ((volatile unsigned char *)0xD4000008);
|
||||||
volatile unsigned char *ledon = ((volatile unsigned char *)0xD400000C);
|
volatile unsigned char *ledon = ((volatile unsigned char *)0xD400000C);
|
||||||
|
|
||||||
for (i = 0; i < 10000; i++)
|
for (i = 0; i < 10000; i++)
|
||||||
{
|
{
|
||||||
*ledon = 0x30;
|
*ledon = 0x30;
|
||||||
delay();
|
delay();
|
||||||
*ledoff = 0x30;
|
*ledoff = 0x30;
|
||||||
delay();
|
delay();
|
||||||
} /* FOR */
|
} /* FOR */
|
||||||
|
|
||||||
} /* MAIN */
|
} /* MAIN */
|
||||||
|
|
||||||
__gccmain()
|
__gccmain()
|
||||||
{
|
{
|
||||||
} /* GCCMAIN */
|
} /* GCCMAIN */
|
||||||
|
|
||||||
|
|
||||||
void exit(int exit_code)
|
void exit(int exit_code)
|
||||||
{
|
{
|
||||||
while(1);
|
while(1);
|
||||||
} /* EXIT */
|
} /* EXIT */
|
||||||
|
|
||||||
|
|
||||||
atexit()
|
atexit()
|
||||||
{
|
{
|
||||||
while(1);
|
while(1);
|
||||||
} /* ATEXIT */
|
} /* ATEXIT */
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,5 +1,5 @@
|
||||||
/***************************************************************************
|
/***************************************************************************
|
||||||
* Copyright (C) 2009 by Alan Carvalho de Assis *
|
* Copyright (C) 2009 by Alan Carvalho de Assis *
|
||||||
* acassis@gmail.com *
|
* acassis@gmail.com *
|
||||||
* *
|
* *
|
||||||
* This program is free software; you can redistribute it and/or modify *
|
* This program is free software; you can redistribute it and/or modify *
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue