ARM11: remove old mrc/mcr commands
Switch to new commands in config scripts Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>__archive__
Øyvind Harboe
parent
1f357869c1
commit
c202ba7d34
|
|
@ -1502,7 +1502,7 @@ proc setc15 @{regs value@} @{
|
|||
|
||||
echo [format "set p15 0x%04x, 0x%08x" $regs $value]
|
||||
|
||||
arm11 mcr $TARGETNAME 15 [expr ($regs>>12)&0x7] \
|
||||
mcr 15 [expr ($regs>>12)&0x7] \
|
||||
[expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] \
|
||||
[expr ($regs>>8)&0x7] $value
|
||||
@}
|
||||
|
|
@ -5796,15 +5796,6 @@ Without arguments, the current settings are displayed.
|
|||
@subsection ARM11 specific commands
|
||||
@cindex ARM11
|
||||
|
||||
@deffn Command {arm11 mcr} pX opc1 CRn CRm opc2 value
|
||||
Write @var{value} to a coprocessor @var{pX} register
|
||||
passing parameters @var{CRn},
|
||||
@var{CRm}, opcodes @var{opc1} and @var{opc2},
|
||||
and the MCR instruction.
|
||||
(The difference beween this and the MCR2 instruction is
|
||||
one bit in the encoding, effecively a fifth parameter.)
|
||||
@end deffn
|
||||
|
||||
@deffn Command {arm11 memwrite burst} [value]
|
||||
Displays the value of the memwrite burst-enable flag,
|
||||
which is enabled by default. Burst writes are only used
|
||||
|
|
@ -5821,15 +5812,6 @@ which is enabled by default.
|
|||
If @var{value} is defined, first assigns that.
|
||||
@end deffn
|
||||
|
||||
@deffn Command {arm11 mrc} pX opc1 CRn CRm opc2
|
||||
Read a coprocessor @var{pX} register passing parameters @var{CRn},
|
||||
@var{CRm}, opcodes @var{opc1} and @var{opc2},
|
||||
and the MRC instruction.
|
||||
(The difference beween this and the MRC2 instruction is
|
||||
one bit in the encoding, effecively a fifth parameter.)
|
||||
Displays the result.
|
||||
@end deffn
|
||||
|
||||
@deffn Command {arm11 step_irq_enable} [value]
|
||||
Displays the value of the flag controlling whether
|
||||
IRQs are enabled during single stepping;
|
||||
|
|
|
|||
|
|
@ -2087,101 +2087,6 @@ static arm11_common_t * arm11_find_target(const char * arg)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int arm11_handle_mrc_mcr(struct command_context_s *cmd_ctx,
|
||||
char *cmd, char **args, int argc, bool read)
|
||||
{
|
||||
int retval;
|
||||
|
||||
if (argc != (read ? 6 : 7))
|
||||
{
|
||||
LOG_ERROR("Invalid number of arguments.");
|
||||
return ERROR_COMMAND_SYNTAX_ERROR;
|
||||
}
|
||||
|
||||
arm11_common_t * arm11 = arm11_find_target(args[0]);
|
||||
|
||||
if (!arm11)
|
||||
{
|
||||
LOG_ERROR("Parameter 1 is not a the JTAG chain position of an ARM11 device.");
|
||||
return ERROR_COMMAND_SYNTAX_ERROR;
|
||||
}
|
||||
|
||||
if (arm11->target->state != TARGET_HALTED)
|
||||
{
|
||||
LOG_WARNING("target was not halted");
|
||||
return ERROR_TARGET_NOT_HALTED;
|
||||
}
|
||||
|
||||
uint32_t values[6];
|
||||
|
||||
for (size_t i = 0; i < (read ? 5 : 6); i++)
|
||||
{
|
||||
COMMAND_PARSE_NUMBER(u32, args[i + 1], values[i]);
|
||||
|
||||
if (values[i] > arm11_coproc_instruction_limits[i])
|
||||
{
|
||||
LOG_ERROR("Parameter %ld out of bounds (%" PRId32 " max).",
|
||||
(long)(i + 2),
|
||||
arm11_coproc_instruction_limits[i]);
|
||||
return ERROR_COMMAND_SYNTAX_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
uint32_t instr = 0xEE000010 |
|
||||
(values[0] << 8) |
|
||||
(values[1] << 21) |
|
||||
(values[2] << 16) |
|
||||
(values[3] << 0) |
|
||||
(values[4] << 5);
|
||||
|
||||
if (read)
|
||||
instr |= 0x00100000;
|
||||
|
||||
retval = arm11_run_instr_data_prepare(arm11);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
if (read)
|
||||
{
|
||||
uint32_t result;
|
||||
retval = arm11_run_instr_data_from_core_via_r0(arm11, instr, &result);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
LOG_INFO("MRC p%d, %d, R0, c%d, c%d, %d = 0x%08" PRIx32 " (%" PRId32 ")",
|
||||
(int)(values[0]),
|
||||
(int)(values[1]),
|
||||
(int)(values[2]),
|
||||
(int)(values[3]),
|
||||
(int)(values[4]), result, result);
|
||||
}
|
||||
else
|
||||
{
|
||||
retval = arm11_run_instr_data_to_core_via_r0(arm11, instr, values[5]);
|
||||
if (retval != ERROR_OK)
|
||||
return retval;
|
||||
|
||||
LOG_INFO("MRC p%d, %d, R0 (#0x%08" PRIx32 "), c%d, c%d, %d",
|
||||
(int)(values[0]), (int)(values[1]),
|
||||
values[5],
|
||||
(int)(values[2]), (int)(values[3]), (int)(values[4]));
|
||||
}
|
||||
|
||||
return arm11_run_instr_data_finish(arm11);
|
||||
}
|
||||
|
||||
static int arm11_handle_mrc(struct command_context_s *cmd_ctx,
|
||||
char *cmd, char **args, int argc)
|
||||
{
|
||||
return arm11_handle_mrc_mcr(cmd_ctx, cmd, args, argc, true);
|
||||
}
|
||||
|
||||
static int arm11_handle_mcr(struct command_context_s *cmd_ctx,
|
||||
char *cmd, char **args, int argc)
|
||||
{
|
||||
return arm11_handle_mrc_mcr(cmd_ctx, cmd, args, argc, false);
|
||||
}
|
||||
|
||||
static int arm11_mrc_inner(target_t *target, int cpnum,
|
||||
uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm,
|
||||
uint32_t *value, bool read)
|
||||
|
|
@ -2300,10 +2205,6 @@ int arm11_register_commands(struct command_context_s *cmd_ctx)
|
|||
"DEBUG ONLY - Hardware single stepping"
|
||||
" (default: disabled)");
|
||||
|
||||
register_command(cmd_ctx, top_cmd, "mcr",
|
||||
arm11_handle_mcr, COMMAND_ANY,
|
||||
"Write Coprocessor register. mcr <jtag_target> <coprocessor> <opcode 1> <CRn> <CRm> <opcode 2> <32bit value to write>. All parameters are numbers only.");
|
||||
|
||||
mw_cmd = register_command(cmd_ctx, top_cmd, "memwrite",
|
||||
NULL, COMMAND_ANY, NULL);
|
||||
register_command(cmd_ctx, mw_cmd, "burst",
|
||||
|
|
@ -2315,9 +2216,6 @@ int arm11_register_commands(struct command_context_s *cmd_ctx)
|
|||
"Terminate program if transfer error was found"
|
||||
" (default: enabled)");
|
||||
|
||||
register_command(cmd_ctx, top_cmd, "mrc",
|
||||
arm11_handle_mrc, COMMAND_ANY,
|
||||
"Read Coprocessor register. mrc <jtag_target> <coprocessor> <opcode 1> <CRn> <CRm> <opcode 2>. All parameters are numbers only.");
|
||||
register_command(cmd_ctx, top_cmd, "step_irq_enable",
|
||||
arm11_handle_bool_step_irq_enable, COMMAND_ANY,
|
||||
"Enable interrupts while stepping"
|
||||
|
|
|
|||
|
|
@ -19,13 +19,13 @@ proc csb732_init { } {
|
|||
# We assume the interpreter latency is enough.
|
||||
|
||||
# Allow access to all coprocessors
|
||||
arm11 mcr imx35.cpu 15 0 15 1 0 0x2001
|
||||
mcr 15 0 15 1 0 0x2001
|
||||
|
||||
# Disable MMU, caches, write buffer
|
||||
arm11 mcr imx35.cpu 15 0 1 0 0 0x78
|
||||
mcr 15 0 1 0 0 0x78
|
||||
|
||||
# Grant manager access to all domains
|
||||
arm11 mcr imx35.cpu 15 0 3 0 0 0xFFFFFFFF
|
||||
mcr 15 0 3 0 0 0xFFFFFFFF
|
||||
|
||||
# Set ARM clock to 532 MHz, AHB to 133 MHz
|
||||
mww 0x53F80004 0x1000
|
||||
|
|
|
|||
|
|
@ -436,22 +436,22 @@ proc initC100 {} {
|
|||
# */
|
||||
# mov r0, #0
|
||||
# mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
|
||||
arm11 mcr c100.cpu 15 0 7 7 0 0x0
|
||||
mcr 15 0 7 7 0 0x0
|
||||
# mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
||||
arm11 mcr c100.cpu 15 0 8 7 0 0x0
|
||||
mcr 15 0 8 7 0 0x0
|
||||
|
||||
# /*
|
||||
# * disable MMU stuff and caches
|
||||
# */
|
||||
# mrc p15, 0, r0, c1, c0, 0
|
||||
arm11 mrc c100.cpu 15 0 1 0 0
|
||||
mrc 15 0 1 0 0
|
||||
# bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
|
||||
# bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
|
||||
# orr r0, r0, #0x00000002 @ set bit 2 (A) Align
|
||||
# orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
|
||||
# orr r0, r0, #0x00400000 @ set bit 22 (U)
|
||||
# mcr p15, 0, r0, c1, c0, 0
|
||||
arm11 mcr c100.cpu 15 0 1 0 0 0x401002
|
||||
mcr 15 0 1 0 0 0x401002
|
||||
# This is from bsp_init() in u-boot/boards/mindspeed/ooma-darwin/board.c
|
||||
# APB init
|
||||
# // Setting APB Bus Wait states to 1, set post write
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ proc setc15 {regs value} {
|
|||
|
||||
echo [format "set p15 0x%04x, 0x%08x" $regs $value]
|
||||
|
||||
arm11 mcr $TARGETNAME 15 [expr ($regs>>12)&0x7] [expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] [expr ($regs>>8)&0x7] $value
|
||||
mcr 15 [expr ($regs>>12)&0x7] [expr ($regs>>0)&0xf] [expr ($regs>>4)&0xf] [expr ($regs>>8)&0x7] $value
|
||||
}
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue