ARM11: use standard single step simulation

The previous stuff was needed because the ARM11 code wasn't using
the standard ARM base type and register access ... but now those
mechanisms work, so we can switch out that special-purpose glue.

This should resolve all the "FIXME -- handle Thumb single stepping"
comments too, and properly handle the processor's mode.  (Modulo
the issue that this code doesn't yet handle two-byte breakpoints.)

Clarify the comments about the the hardware single stepping.  When
we eventually share breakpoint code with Cortex-A8, we can just make
that be the default on cores which support it.  We may still want an
override command, not just to facilitate testing but to cope with
"instruction address mismatch" not quite being true single-step.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

TODO

@@ -167,8 +167,7 @@ https://lists.berlios.de/pipermail/openocd-development/2009-October/011506.html
   mdw 0xb80005f0 0x8, mdh 0xb80005f0 0x10, mdb 0xb80005f0 0x20. mdb returns
   garabage.
   - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...)
-  - thumb support is missing: ISTR ARMv6 requires Thumb.
+- Thumb2 single stepping: ARM1156T2 needs simulator support
-  ARM1156 has Thumb2; ARM1136 doesn't.
 - Cortex A8 support (ML)
   - add target implementation (ML)
 - Generic ARM run_algorithm() interface

src/target/arm11.c

@@ -761,96 +761,6 @@ static int arm11_resume(struct target *target, int current,
 	return ERROR_OK;
 }
 
-
-static int armv4_5_to_arm11(int reg)
-{
-	if (reg < 16)
-		return reg;
-	switch (reg)
-	{
-	case ARMV4_5_CPSR:
-		return ARM11_RC_CPSR;
-	case 16:
-		/* FIX!!! handle thumb better! */
-		return ARM11_RC_CPSR;
-	default:
-		LOG_ERROR("BUG: register translation from armv4_5 to arm11 not supported %d", reg);
-		exit(-1);
-	}
-}
-
-
-static uint32_t arm11_sim_get_reg(struct arm_sim_interface *sim, int reg)
-{
-	struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
-
-	reg=armv4_5_to_arm11(reg);
-
-	return buf_get_u32(arm11->reg_list[reg].value, 0, 32);
-}
-
-static void arm11_sim_set_reg(struct arm_sim_interface *sim,
-		int reg, uint32_t value)
-{
-	struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
-
-	reg=armv4_5_to_arm11(reg);
-
-	buf_set_u32(arm11->reg_list[reg].value, 0, 32, value);
-}
-
-static uint32_t arm11_sim_get_cpsr(struct arm_sim_interface *sim,
-		int pos, int bits)
-{
-	struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
-
-	return buf_get_u32(arm11->reg_list[ARM11_RC_CPSR].value, pos, bits);
-}
-
-static enum armv4_5_state arm11_sim_get_state(struct arm_sim_interface *sim)
-{
-//	struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
-
-	/* FIX!!!! we should implement thumb for arm11 */
-	return ARMV4_5_STATE_ARM;
-}
-
-static void arm11_sim_set_state(struct arm_sim_interface *sim,
-		enum armv4_5_state mode)
-{
-//	struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
-
-	/* FIX!!!! we should implement thumb for arm11 */
-	LOG_ERROR("Not implemented: %s", __func__);
-}
-
-
-static enum armv4_5_mode arm11_sim_get_mode(struct arm_sim_interface *sim)
-{
-	//struct arm11_common * arm11 = (struct arm11_common *)sim->user_data;
-
-	/* FIX!!!! we should implement something that returns the current mode here!!! */
-	return ARMV4_5_MODE_USR;
-}
-
-static int arm11_simulate_step(struct target *target, uint32_t *dry_run_pc)
-{
-	struct arm_sim_interface sim;
-
-	sim.user_data=target->arch_info;
-	sim.get_reg=&arm11_sim_get_reg;
-	sim.set_reg=&arm11_sim_set_reg;
-	sim.get_reg_mode=&arm11_sim_get_reg;
-	sim.set_reg_mode=&arm11_sim_set_reg;
-	sim.get_cpsr=&arm11_sim_get_cpsr;
-	sim.get_mode=&arm11_sim_get_mode;
-	sim.get_state=&arm11_sim_get_state;
-	sim.set_state=&arm11_sim_set_state;
-
-	return arm_simulate_step_core(target, dry_run_pc, &sim);
-
-}
-
 static int arm11_step(struct target *target, int current,
 		uint32_t address, int handle_breakpoints)
 {
@@ -919,24 +829,41 @@ static int arm11_step(struct target *target, int current,
 
 		if (arm11_config_hardware_step)
 		{
-			/* hardware single stepping be used if possible or is it better to
+			/* Hardware single stepping ("instruction address
-			 * always use the same code path? Hardware single stepping is not supported
+			 * mismatch") is used if enabled.  It's not quite
-			 * on all hardware
+			 * exactly "run one instruction"; "branch to here"
+			 * loops won't break, neither will some other cases,
+			 * but it's probably the best default.
+			 *
+			 * Hardware single stepping isn't supported on v6
+			 * debug modules.  ARM1176 and v7 can support it...
+			 *
+			 * FIXME Thumb stepping likely needs to use 0x03
+			 * or 0xc0 byte masks, not 0x0f.
 			 */
 			 brp[0].value	= R(PC);
-			 brp[1].value	= 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (2 << 21);
+			 brp[1].value	= 0x1 | (3 << 1) | (0x0F << 5)
+					| (0 << 14) | (0 << 16) | (0 << 20)
+					| (2 << 21);
 		} else
 		{
-			/* sets a breakpoint on the next PC(calculated by simulation),
+			/* Sets a breakpoint on the next PC, as calculated
+			 * by instruction set simulation.
+			 *
+			 * REVISIT stepping Thumb on ARM1156 requires Thumb2
+			 * support from the simulator.
 			 */
 			uint32_t next_pc;
 			int retval;
-			retval = arm11_simulate_step(target, &next_pc);
+
+			retval = arm_simulate_step(target, &next_pc);
 			if (retval != ERROR_OK)
 				return retval;
 
 			brp[0].value	= next_pc;
-			brp[1].value	= 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (0 << 21);
+			brp[1].value	= 0x1 | (3 << 1) | (0x0F << 5)
+					| (0 << 14) | (0 << 16) | (0 << 20)
+					| (0 << 21);
 		}
 
 		CHECK_RETVAL(arm11_sc7_run(arm11, brp, ARRAY_SIZE(brp)));
@@ -1826,6 +1753,13 @@ static int arm11_build_reg_cache(struct target *target)
 	return ERROR_OK;
 }
 
+/* FIXME all these BOOL_WRAPPER things should be modifying
+ * per-instance state, not shared state; ditto the vector
+ * catch register support.  Scan chains with multiple cores
+ * should be able to say "work with this core like this,
+ * that core like that".  Example, ARM11 MPCore ...
+ */
+
 #define ARM11_BOOL_WRAPPER(name, print_name)	\
 		COMMAND_HANDLER(arm11_handle_bool_##name) \
 		{ \