diff --git a/testing/results/v0.4.0-rc1/AT91FR40162.html b/testing/results/v0.4.0-rc1/AT91FR40162.html new file mode 100755 index 000000000..0baa31e6b --- /dev/null +++ b/testing/results/v0.4.0-rc1/AT91FR40162.html @@ -0,0 +1,856 @@ + + +Test results for revision 1.62 + + + + +

SAM7

+ +

Connectivity

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
CON001AT91FR40162ZY1000Telnet connectionPower on, jtag target attachedOn console, type
telnet ip port
Open On-Chip Debugger
>
Open On-Chip Debugger
>
PASS
CON002AT91FR40162ZY1000GDB server connectionPower on, jtag target attachedOn GDB console, type
target remote ip:port
Remote debugging using 10.0.0.73:3333 + (gdb) tar remo 10.0.0.138:3333
+ Remote debugging using 10.0.0.138:3333
+ 0x000155b8 in ?? ()
+
PASS
+ +

Reset

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RES001AT91FR40162ZY1000Reset halt on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ + > mdw 0x01000000 32
+ 0x01000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > reset halt
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0x600000d3 pc: 0x00008a70
+ >
+
+
PASS
RES002AT91FR40162ZY1000Reset init on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset init
Reset should return without error and the output should contain
executing reset script 'name_of_the_script'
+ + > reset init
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0x600000d3 pc: 0x00008ea4
+ >
+
+
PASS
+ NOTE! Even if there is no message, the reset script is being executed (proved by side effects)
RES003AT91FR40162ZY1000Reset after a power cycle of the targetReset the target then power cycle the targetConnect via the telnet interface and type
reset halt after the power was detected
Reset should return without error and the output should contain
target state: halted
+ + Sensed nSRST asserted
+ Sensed power dropout.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0xd5dff7e6
+ Sensed power restore.
+ Sensed nSRST deasserted
+ > reset halt
+ JTAG device found: 0x3f0f0f0f (Manufacturer: 0x787, Part: 0xf0f0, Version: 0x3)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0x0000072c
+ >
+
+
PASS
RES004AT91FR40162ZY1000Reset halt on a blank target where reset halt is supportedErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
pc = 0
+ > reset halt
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0x00008b38
+ >
+
PASS
RES005AT91FR40162ZY1000Reset halt on a blank target using return clockErase all the content of the flash, set the configuration script to use RCLKConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ + N/A, At91EB40A does NOT have support for RCLK + + N/A
+ +

JTAG Speed

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetZY1000DescriptionInitial stateInputExpected outputActual outputPass/Fail
SPD001AT91FR40162ZY100016MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > reset halt
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0x00008ae8
+ > jtag_khz 16000
+ jtag_speed 4 => JTAG clk=16.000000
+ 16000 kHz
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+
+
PASS
SPD002AT91FR40162ZY10008MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > reset halt
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0x00008c14
+ > jtag_khz 8000
+ jtag_speed 8 => JTAG clk=8.000000
+ 8000 kHz
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ >
+
+
PASS
SPD003AT91FR40162ZY10004MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > reset halt
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0x00008bc4
+ > jtag_khz 4000
+ jtag_speed 16 => JTAG clk=4.000000
+ 4000 kHz
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ >
+
+
PASS
SPD004AT91FR40162ZY10002MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > reset halt
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0x00009678
+ > jtag_khz 2000
+ jtag_speed 32 => JTAG clk=2.000000
+ 2000 kHz
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ >
+
+
PASS
SPD005AT91FR40162ZY1000RCLK on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 0
+ RCLK - adaptive
+ RCLK timeout
+
+ N/A for this target +
N/A for this target
+ +

Debugging

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
DBG001AT91FR40162ZY1000Load is workingReset init is working, RAM is accesible, GDB server is startedOn the console of the OS:
+ $ arm-none-eabi-gdb redboot_ram.elf
+ (gdb) target remote ip:port
+ (gdb) load +
Load should return without error, typical output looks like:
+ + Loading section .text, size 0x14c lma 0x0
+ Start address 0x40, load size 332
+ Transfer rate: 180 bytes/sec, 332 bytes/write.
+
+
+ (gdb) load
+ Loading section .rom_vectors, size 0x40 lma 0xc000
+ Loading section .text, size 0x103e8 lma 0xc040
+ Loading section .rodata, size 0x1a84 lma 0x1c428
+ Loading section .data, size 0x3ec lma 0x1deac
+ Start address 0xc040, load size 74392
+ Transfer rate: 572 KB/sec, 9299 bytes/write.
+ (gdb) +
PASS
DBG002AT91FR40162ZY1000Software breakpointLoad the redboot_ram.elf application, use instructions from GDB001In the GDB console:
+ + (gdb) monitor arm7_9 dbgrq enable
+ software breakpoints enabled
+ (gdb) break cyg_start
+ Breakpoint 1 at 0xec: file src/main.c, line 71.
+ (gdb) continue
+ Continuing. +
+
The software breakpoint should be reached, a typical output looks like:
+ + Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ + (gdb) monitor arm7_9 dbgrq enable
+ use of EmbeddedICE dbgrq instead of breakpoint for target halt enabled
+ (gdb) break cyg_start
+
+ Breakpoint 1 at 0x155b8: file /home/edgar/temp/ecosboard/packages/redboot/current/src/main.c, line 264.
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 1, cyg_start ()
+ at /home/edgar/temp/ecosboard/packages/redboot/current/src/main.c:264
+ 264 CYGACC_CALL_IF_MONITOR_VERSION_SET(RedBoot_version);
+ (gdb)
+
+
PASS
DBG003AT91FR40162ZY1000Single step in a RAM applicationLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
(gdb) step
The next instruction should be reached, typical output:
+ + (gdb) step
+ 70 DWORD b = 2; + +
+
+ + (gdb) step
+ 266 CYGACC_CALL_IF_MONITOR_RETURN_SET(return_to_redboot);
+ (gdb)
+
+
PASS
DBG004AT91FR40162ZY1000Software break points are working after a resetLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
+ (gdb) monitor reset init
+ (gdb) load
+ (gdb) continue
+
The breakpoint should be reached, typical output:
+ + Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1; +
+
+ (gdb) moni reset init
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0x600000d3 pc: 0x00008ae8
+ (gdb) load
+ Loading section .rom_vectors, size 0x40 lma 0xc000
+ Loading section .text, size 0x103e8 lma 0xc040
+ Loading section .rodata, size 0x1a84 lma 0x1c428
+ Loading section .data, size 0x3ec lma 0x1deac
+ Start address 0xc040, load size 74392
+ Transfer rate: 576 KB/sec, 9299 bytes/write.
+ (gdb) c
+ Continuing.
+
+ Breakpoint 1, cyg_start ()
+ at /home/edgar/temp/ecosboard/packages/redboot/current/src/main.c:264
+ 264 CYGACC_CALL_IF_MONITOR_VERSION_SET(RedBoot_version);
+ (gdb)
+
PASS
DBG005AT91FR40162ZY1000Hardware breakpointFlash the redboot_rom.elf application. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset init
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor arm7_9 force_hw_bkpts enable
+ force hardware breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+
+
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ + (gdb) load
+ Loading section .rom_vectors, size 0x40 lma 0x1000000
+ Loading section .text, size 0x10638 lma 0x1000040
+ Loading section .rodata, size 0x1a84 lma 0x1010678
+ Loading section .data, size 0x428 lma 0x10120fc
+ Start address 0x1000040, load size 75044
+ Transfer rate: 33 KB/sec, 9380 bytes/write.
+ (gdb) break cyg_start
+ Breakpoint 1 at 0x100979c: file /home/edgar/temp/ecosboard/packages/redboot/current/src/main.c, line 264.
+ (gdb) c
+ Continuing.
+ Note: automatically using hardware breakpoints for read-only addresses.
+
+ Breakpoint 1, cyg_start () at /home/edgar/temp/ecosboard/packages/redboot/current/src/main.c:264
+ 264 CYGACC_CALL_IF_MONITOR_VERSION_SET(RedBoot_version);
+ (gdb)
+
+
PASS
DBG006AT91FR40162ZY1000Hardware breakpoint is set after a resetFollow the instructions to flash and insert a hardware breakpoint from DBG005In GDB, type
+ + (gdb) monitor reset
+ (gdb) monitor reg pc 0x100000
+ pc (/32): 0x00100000
+ (gdb) continue +

+ where the value inserted in PC is the start address of the application +
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ + (gdb) moni reset init
+ JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0x200000d3 pc: 0x01000200
+ (gdb) moni reg pc 0x1000000
+ pc (/32): 0x01000000
+ (gdb) c
+ Continuing.
+
+ Breakpoint 1, cyg_start () at /home/edgar/temp/ecosboard/packages/redboot/current/src/main.c:264
+ 264 CYGACC_CALL_IF_MONITOR_VERSION_SET(RedBoot_version);
+ (gdb)
+
+
PASS
DBG007AT91FR40162ZY1000Single step in ROMFlash the test_rom.elf application and set a breakpoint in main, use DBG005. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor arm7_9 force_hw_bkpts enable
+ force hardware breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) step +
+
The breakpoint should be reached, typical output:
+ + target state: halted
+ target halted in ARM state due to single step, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x0010013c
+ 70 DWORD b = 2;
+
+
+ Breakpoint 1, cyg_start () at /home/edgar/temp/ecosboard/packages/redboot/current/src/main.c:264
+ 264 CYGACC_CALL_IF_MONITOR_VERSION_SET(RedBoot_version);
+ (gdb) step
+ 266 CYGACC_CALL_IF_MONITOR_RETURN_SET(return_to_redboot);
+
PASS
+ +

RAM access

+Note: these tests are not designed to test/debug the target, but to test functionalities! + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RAM001AT91FR40162ZY100032 bit Write/read RAMReset init is workingOn the telnet interface
+ > mww ram_address 0xdeadbeef 16
+ > mdw ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 32bit long containing 0xdeadbeef.
+ + > mww 0x0 0xdeadbeef 16
+ > mdw 0x0 32
+ 0x00000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000040: e1a00000 e59fa51c e59f051c e04aa000 00080017 00009388 00009388 00009388
+ 0x00000060: 00009388 0002c2c0 0002c2c0 000094f8 000094f4 00009388 00009388 00009388
+
+
+ > mww 0 0xdeadbeef 16
+ > mdw 0x0 32
+ 0x00000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000040: 15aadc6d 425b6f33 e789f955 d390dcc2 00080017 010067b4 010067b4 010067b4
+ 0x00000060: 010067b4 00006e74 00006e74 010067b4 010067b4 010067b4 010067b4 010067b4
+
PASS
RAM002AT91FR40162ZY100016 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwh ram_address 0xbeef 16
+ > mdh ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 16bit long containing 0xbeef.
+ + > mwh 0x0 0xbeef 16
+ > mdh 0x0 32
+ 0x00000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+ 0x00000020: 00e0 0000 021c 0000 0240 0000 026c 0000 0288 0000 0000 0000 0388 0000 0350 0000
+ > +
+
+ > mwh 0 0xbeef 16
+ > mdh 0x0 32
+ 0x00000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+ 0x00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+
PASS
There is a problem with the formatting of the output
RAM003AT91FR40162ZY10008 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwb ram_address 0xab 16
+ > mdb ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 8bit long containing 0xab.
+ + > mwb ram_address 0xab 16
+ > mdb ram_address 32
+ 0x00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ > +
+
+ > mwb 0x0 0xab 16
+ > mdb 0x0 32
+ 0x00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+
PASS
+ + + +

Flash access

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
FLA001AT91FR40162ZY1000Flash probeReset init is workingOn the telnet interface:
+ > flash probe 0 +
The command should execute without error. The output should state the name of the flash and the starting address. An example of output:
+ flash 'ecosflash' found at 0x01000000 +
+ + > flash probe 0 + flash 'ecosflash' found at 0x01000000 + + PASS
FLA002AT91FR40162ZY1000flash fillwReset init is working, flash is probedOn the telnet interface
+ > flash fillw 0x100000 0xdeadbeef 16 + +
The commands should execute without error. The output looks like:
+ + wrote 64 bytes to 0x0100000 in 11.610000s (0.091516 kb/s) +
+ To verify the contents of the flash:
+ + > mdw 0x100000 32
+ 0x0100000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x0100020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x0100040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x0100060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+ > flash fillw 0x01000000 0xdeadbeef 16
+ wrote 64 bytes to 0x01000000 in 0.010000s (6.250 kb/s)
+ > mdw 0x1000000 32
+ 0x01000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x01000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
PASS
FLA003AT91FR40162ZY1000Flash eraseReset init is working, flash is probedOn the telnet interface
+ > flash erase_address 0x100000 0x2000 + +
The commands should execute without error.
+ + erased address 0x0100000 length 8192 in 4.970000s + + To check that the flash has been erased, read at different addresses. The result should always be 0xff. + + > mdw 0x100000 32
+ 0x0100000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x0100020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x0100040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x0100060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+ > flash erase_address 0x1000000 0x10000
+ erased address 0x01000000 (length 65536) in 0.840000s (76.190 kb/s)
+ > mdw 0x1000000 32
+ 0x01000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+
PASS
FLA004AT91FR40162ZY1000Loading to flash from GDBReset init is working, flash is probed, connectivity to GDB server is workingStart GDB using a ROM elf image, eg: arm-elf-gdb test_rom.elf.
+ + (gdb) target remote ip:port
+ (gdb) monitor reset halt
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor verify_image path_to_elf_file +
+
The output should look like:
+ + verified 404 bytes in 5.060000s +
+ The failure message is something like:
+ Verify operation failed address 0x00200000. Was 0x00 instead of 0x18 +
+ + (gdb) load
+ Loading section .rom_vectors, size 0x40 lma 0x1000000
+ Loading section .text, size 0x10638 lma 0x1000040
+ Loading section .rodata, size 0x1a84 lma 0x1010678
+ Loading section .data, size 0x428 lma 0x10120fc
+ Start address 0x1000040, load size 75044
+ Transfer rate: 34 KB/sec, 9380 bytes/write.
+ (gdb) moni verify_image /tftp/10.0.0.190/redboot_rom.elf
+ keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (1820). Workaround: increase "set remotetimeout" in GDB
+ verified 75044 bytes in 1.960000s (37.390 kb/s)
+
+
PASS
+ + + \ No newline at end of file diff --git a/testing/results/v0.4.0-rc1/LPC2148.html b/testing/results/v0.4.0-rc1/LPC2148.html new file mode 100755 index 000000000..425b52484 --- /dev/null +++ b/testing/results/v0.4.0-rc1/LPC2148.html @@ -0,0 +1,933 @@ + + +Test results for revision 1.62 + + + + +

LPC2148

+ +

Connectivity

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
CON001LPC2148ZY1000Telnet connectionPower on, jtag target attachedOn console, type
telnet ip port
Open On-Chip Debugger
>
Open On-Chip Debugger
>
PASS
CON002LPC2148ZY1000GDB server connectionPower on, jtag target attachedOn GDB console, type
target remote ip:port
Remote debugging using 10.0.0.73:3333 + (gdb) tar remo 10.0.0.73:3333
+ Remote debugging using 10.0.0.73:3333
+ 0x00000000 in ?? ()
+
PASS
+ +

Reset

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RES001LPC2148ZY1000Reset halt on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ + > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > reset halt
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: Supervisor
+ cpsr: 0xa00000f3 pc: 0x7fffd2d6
+ > +
+
PASS
RES002LPC2148ZY1000Reset init on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset init
Reset should return without error and the output should contain
executing reset script 'name_of_the_script'
+ + > reset init
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: Supervisor
+ cpsr: 0xa00000f3 pc: 0x7fffd2da
+ core state: ARM
+ > +
+
PASS
+ NOTE! Even if there is no message, the reset script is being executed (proved by side effects)
RES003LPC2148ZY1000Reset after a power cycle of the targetReset the target then power cycle the targetConnect via the telnet interface and type
reset halt after the power was detected
Reset should return without error and the output should contain
target state: halted
+ + nsed nSRST asserted.
+ nsed power dropout.
+ nsed power restore.
+ SRST took 186ms to deassert
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: Supervisor
+ cpsr: 0xa00000f3 pc: 0x7fffd2d6
+ core state: ARM
+ > reset halt
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: Supervisor
+ cpsr: 0xa00000f3 pc: 0x7fffd2d6
+ > +
+
PASS
RES004LPC2148ZY1000Reset halt on a blank target where reset halt is supportedErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
pc = 0
+ + > reset halt
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: Supervisor
+ cpsr: 0xa00000f3 pc: 0x7fffd2d6
+ > +
+
PASS
RES005LPC2148ZY1000Reset halt on a blank target using return clockErase all the content of the flash, set the configuration script to use RCLKConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ + > jtag_khz 0
+ RCLK - adaptive
+ > reset init
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: Supervisor
+ cpsr: 0xa00000f3 pc: 0x7fffd2d6
+ core state: ARM
+ > +
+
PASS
+ +

JTAG Speed

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetZY1000DescriptionInitial stateInputExpected outputActual outputPass/Fail
SPD001LPC2148ZY100016MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 16000
+ jtag_speed 4 => JTAG clk=16.000000
+ 16000 kHz
+ > reset halt
+ JTAG scan chain interrogation failed: all zeroes
+ Check JTAG interface, timings, target power, etc.
+ error: -100
+ Command handler execution failed
+ in procedure 'reset' called at file "command.c", line 638
+ called at file "/home/laurentiu/workspace/zy1000/build/../openocd/src/helper/command.c", line 352
+ invalid mode value encountered 0
+ cpsr contains invalid mode value - communication failure
+ ThumbEE -- incomplete support
+ target state: halted
+ target halted in ThumbEE state due to debug-request, current mode: System
+ cpsr: 0x1fffffff pc: 0xfffffffa
+ invalid mode value encountered 0
+ cpsr contains invalid mode value - communication failure
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: System
+ cpsr: 0xc00003ff pc: 0xfffffff0
+ invalid mode value encountered 0
+ cpsr contains invalid mode value - communication failure
+ invalid mode value encountered 0
+ cpsr contains invalid mode value - communication failure
+ invalid mode value encountered 0
+ cpsr contains invalid mode value - communication failure
+ invalid mode value encountered 0
+ cpsr contains invalid mode value - communication failure
+ ThumbEE -- incomplete support
+ target state: halted
+ target halted in ThumbEE state due to debug-request, current mode: System
+ cpsr: 0xffffffff pc: 0xfffffffa
+ > +
+
FAIL
SPD002LPC2148ZY10008MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 8000
+ jtag_speed 8 => JTAG clk=8.000000
+ 8000 kHz
+ > reset halt
+ JTAG scan chain interrogation failed: all zeroes
+ Check JTAG interface, timings, target power, etc.
+ error: -100
+ Command handler execution failed
+ in procedure 'reset' called at file "command.c", line 638
+ called at file "/home/laurentiu/workspace/zy1000/build/../openocd/src/helper/command.c", line 352
+ invalid mode value encountered 0
+ cpsr contains invalid mode value - communication failure
+ invalid mode value encountered 0
+ cpsr contains invalid mode value - communication failure
+ > +
+
FAIL
SPD003LPC2148ZY10004MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 4000
+ jtag_speed 16 => JTAG clk=4.000000
+ 4000 kHz
+ > reset halt
+ JTAG tap: lpc2148.cpu tap/device found: 0xc79f0f87 (mfg: 0x7c3, part: 0x79f0, ver: 0xc)
+ JTAG tap: lpc2148.cpu UNEXPECTED: 0xc79f0f87 (mfg: 0x7c3, part: 0x79f0, ver: 0xc)
+ JTAG tap: lpc2148.cpu expected 1 of 1: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ Unexpected idcode after end of chain: 64 0x0000007f
+ Unexpected idcode after end of chain: 160 0x0000007f
+ Unexpected idcode after end of chain: 192 0x0000007f
+ Unexpected idcode after end of chain: 320 0x0000007f
+ Unexpected idcode after end of chain: 352 0x0000007f
+ Unexpected idcode after end of chain: 384 0x0000007f
+ Unexpected idcode after end of chain: 480 0x0000007f
+ Unexpected idcode after end of chain: 512 0x0000007f
+ Unexpected idcode after end of chain: 544 0x0000007f
+ double-check your JTAG setup (interface, speed, missing TAPs, ...)
+ error: -100
+ Command handler execution failed
+ in procedure 'reset' called at file "command.c", line 638
+ called at file "/home/laurentiu/workspace/zy1000/build/../openocd/src/helper/command.c", line 352
+ > +
+
FAIL
SPD004LPC2148ZY10002MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 2000
+ jtag_speed 32 => JTAG clk=2.000000
+ 2000 kHz
+ > reset halt
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: Supervisor
+ cpsr: 0xa00000f3 pc: 0x7fffd2da
+ > mdw 0 32
+ 0x00000000: e59f4034 e3a05002 e5845000 e3a05003 e5845004 e59f201c e3a03000 e1020093
+ 0x00000020: e2822028 e1021093 e3c03007 e5023028 e51ff004 7fffd1c4 e002c014 e01fc000
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
+
PASS
SPD005LPC2148ZY1000RCLK on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 0
+ RCLK - adaptive
+ > mdw 0 32
+ 0x00000000: e59f4034 e3a05002 e5845000 e3a05003 e5845004 e59f201c e3a03000 e1020093
+ 0x00000020: e2822028 e1021093 e3c03007 e5023028 e51ff004 7fffd1c4 e002c014 e01fc000
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
+
PASS
+ +

Debugging

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
DBG001LPC2148ZY1000Load is workingReset init is working, RAM is accesible, GDB server is startedOn the console of the OS:
+ arm-elf-gdb test_ram.elf
+ (gdb) target remote ip:port
+ (gdb) load +
Load should return without error, typical output looks like:
+ + Loading section .text, size 0x14c lma 0x0
+ Start address 0x40, load size 332
+ Transfer rate: 180 bytes/sec, 332 bytes/write.
+
+
+ (gdb) load
+ Loading section .text, size 0x16c lma 0x40000000
+ Start address 0x40000040, load size 364
+ Transfer rate: 32 KB/sec, 364 bytes/write.
+ (gdb) +
PASS
DBG002LPC2148ZY1000Software breakpointLoad the test_ram.elf application, use instructions from GDB001In the GDB console:
+ + (gdb) monitor gdb_breakpoint_override soft
+ software breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0xec: file src/main.c, line 71.
+ (gdb) continue
+ Continuing. +
+
The software breakpoint should be reached, a typical output looks like:
+ + target state: halted
+ target halted in ARM state due to breakpoint, current mode: Supervisor
+ cpsr: 0x000000d3 pc: 0x000000ec
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1; +
+
+ + (gdb) monitor gdb_breakpoint_override soft
+ force soft breakpoints
+ Current language: auto
+ The current source language is "auto; currently asm".
+ (gdb) break main
+ Breakpoint 1 at 0x4000010c: file src/main.c, line 71.
+ (gdb) c
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1;
+ Current language: auto
+ The current source language is "auto; currently c".
+ (gdb) +
+
PASS
DBG003LPC2148ZY1000Single step in a RAM applicationLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
(gdb) step
The next instruction should be reached, typical output:
+ + (gdb) step
+ target state: halted
+ target halted in ARM state due to single step, current mode: Abort
+ cpsr: 0x20000097 pc: 0x000000f0
+ target state: halted
+ target halted in ARM state due to single step, current mode: Abort
+ cpsr: 0x20000097 pc: 0x000000f4
+ 72 DWORD b = 2; +
+
+ + (gdb) step
+ 72 DWORD b = 2;
+ (gdb) +
+
PASS
DBG004LPC2148ZY1000Software break points are working after a resetLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
+ (gdb) monitor reset init
+ (gdb) load
+ (gdb) continue
+
The breakpoint should be reached, typical output:
+ + target state: halted
+ target halted in ARM state due to breakpoint, current mode: Supervisor
+ cpsr: 0x000000d3 pc: 0x000000ec
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1; +
+
+ (gdb) moni reset init
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in Thumb state due to debug-request, current mode: Supervisor
+ cpsr: 0xa00000f3 pc: 0x7fffd2d6
+ core state: ARM
+ (gdb) load
+ Loading section .text, size 0x16c lma 0x40000000
+ Start address 0x40000040, load size 364
+ Transfer rate: 27 KB/sec, 364 bytes/write.
+ (gdb) c
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1;
+ (gdb) +
PASS
DBG005LPC2148ZY1000Hardware breakpointFlash the test_rom.elf application. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset init
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor gdb_breakpoint_override hard
+ force hard breakpoints
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+
+
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ + (gdb) monitor gdb_breakpoint_override hard
+ force hard breakpoints
+ (gdb) break main
+ Breakpoint 1 at 0x10c: file src/main.c, line 71.
+ (gdb) continue
+ Continuing.
+ Note: automatically using hardware breakpoints for read-only addresses.
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1;
+ Current language: auto
+ The current source language is "auto; currently c".
+ (gdb) +
+
PASS NOTE: This test is failing from time to time, not able to describe a cause
DBG006LPC2148ZY1000Hardware breakpoint is set after a resetFollow the instructions to flash and insert a hardware breakpoint from DBG005In GDB, type
+ + (gdb) monitor reset
+ (gdb) monitor reg pc 0x100000
+ pc (/32): 0x00100000
+ (gdb) continue +

+ where the value inserted in PC is the start address of the application +
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ + (gdb) monitor reset init
+ JTAG tap: lpc2148.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x00000160
+ core state: ARM
+ (gdb) monitor reg pc 0x40
+ pc (/32): 0x00000040
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1;
+ (gdb) +
+
PASS
DBG007LPC2148ZY1000Single step in ROMFlash the test_rom.elf application and set a breakpoint in main, use DBG005. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor gdb_breakpoint_override hard
+ force hard breakpoints
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) step +
+
The breakpoint should be reached, typical output:
+ + target state: halted
+ target halted in ARM state due to single step, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x0010013c
+ 70 DWORD b = 2;
+
+
+ (gdb) load
+ Loading section .text, size 0x16c lma 0x0
+ Start address 0x40, load size 364
+ Transfer rate: 637 bytes/sec, 364 bytes/write.
+ (gdb) monitor gdb_breakpoint_override hard
+ force hard breakpoints
+ Current language: auto
+ The current source language is "auto; currently asm".
+ (gdb) break main
+ Breakpoint 1 at 0x10c: file src/main.c, line 71.
+ (gdb) continue
+ Continuing.
+ Note: automatically using hardware breakpoints for read-only addresses.
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1;
+ Current language: auto
+ The current source language is "auto; currently c".
+ (gdb) step
+ 72 DWORD b = 2;
+ (gdb) + +
PASS
+ +

RAM access

+Note: these tests are not designed to test/debug the target, but to test functionalities! + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RAM001LPC2148ZY100032 bit Write/read RAMReset init is workingOn the telnet interface
+ > mww ram_address 0xdeadbeef 16
+ > mdw ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 32bit long containing 0xdeadbeef.
+ + > mww 0x0 0xdeadbeef 16
+ > mdw 0x0 32
+ 0x00000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000040: e1a00000 e59fa51c e59f051c e04aa000 00080017 00009388 00009388 00009388
+ 0x00000060: 00009388 0002c2c0 0002c2c0 000094f8 000094f4 00009388 00009388 00009388
+
+
+ > mww 0x40000000 0xdeadbeef 16
+ > mdw 0x40000000 32
+ 0x40000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x40000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x40000040: e1a00000 e1a00000 e1a00000 e1a00000 e1a00000 e1a00000 e1a00000 e1a00000
+ 0x40000060: e321f0db e59fd07c e321f0d7 e59fd078 e321f0d1 e59fd074 e321f0d2 e59fd070
+ > +
PASS
RAM002LPC2148ZY100016 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwh ram_address 0xbeef 16
+ > mdh ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 16bit long containing 0xbeef.
+ + > mwh 0x0 0xbeef 16
+ > mdh 0x0 32
+ 0x00000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+ 0x00000020: 00e0 0000 021c 0000 0240 0000 026c 0000 0288 0000 0000 0000 0388 0000 0350 0000
+ > +
+
+ > mwh 0x40000000 0xbeef 16
+ > mdh 0x40000000 32
+ 0x40000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+ 0x40000020: beef dead beef dead beef dead beef dead beef dead beef dead beef dead beef dead
+ > +
PASS
RAM003LPC2148ZY10008 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwb ram_address 0xab 16
+ > mdb ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 8bit long containing 0xab.
+ + > mwb ram_address 0xab 16
+ > mdb ram_address 32
+ 0x00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ > +
+
+ > mwb 0x40000000 0xab 16 + > mdb 0x40000000 32 + 0x40000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ef be ef be ef be ef be ef be ef be ef be ef be + > + + PASS
+ + + +

Flash access

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
FLA001LPC2148ZY1000Flash probeReset init is workingOn the telnet interface:
+ > flash probe 0 +
The command should execute without error. The output should state the name of the flash and the starting address. An example of output:
+ flash 'ecosflash' found at 0x01000000 +
+ + > flash probe 0
+ flash 'lpc2000' found at 0x00000000 +
+
PASS
FLA002LPC2148ZY1000flash fillwReset init is working, flash is probedOn the telnet interface
+ > flash fillw 0x1000000 0xdeadbeef 16 + +
The commands should execute without error. The output looks like:
+ + wrote 64 bytes to 0x01000000 in 11.610000s (0.091516 kb/s) +
+ To verify the contents of the flash:
+ + > mdw 0x1000000 32
+ 0x01000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x01000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+ > flash fillw 0x0 0xdeadbeef 16
+ Verification will fail since checksum in image (0xdeadbeef) to be written to flash is different from calculated vector checksum (0xe93fc777).
+ To remove this warning modify build tools on developer PC to inject correct LPC vector checksum.
+ wrote 64 bytes to 0x00000000 in 0.040000s (1.563 kb/s)
+ > mdw 0 32
+ 0x00000000: deadbeef deadbeef deadbeef deadbeef deadbeef e93fc777 deadbeef deadbeef
+ 0x00000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
FAIL
FLA003LPC2148ZY1000Flash eraseReset init is working, flash is probedOn the telnet interface
+ > flash erase_address 0x1000000 0x2000 + +
The commands should execute without error.
+ + erased address 0x01000000 length 8192 in 4.970000s + + To check that the flash has been erased, read at different addresses. The result should always be 0xff. + + > mdw 0x1000000 32
+ 0x01000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+ > flash erase_address 0 0x2000
+ erased address 0x00000000 (length 8192) in 0.510000s (15.686 kb/s)
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
PASS
FLA004LPC2148ZY1000Loading to flash from GDBReset init is working, flash is probed, connectivity to GDB server is workingStart GDB using a ROM elf image, eg: arm-elf-gdb test_rom.elf.
+ + (gdb) target remote ip:port
+ (gdb) monitor reset
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write. + (gdb) monitor verify_image path_to_elf_file +
+
The output should look like:
+ + verified 404 bytes in 5.060000s +
+ The failure message is something like:
+ Verify operation failed address 0x00200000. Was 0x00 instead of 0x18 +
+ + (gdb) moni verify_image /tftp/10.0.0.194/test_rom.elf
+ checksum mismatch - attempting binary compare
+ Verify operation failed address 0x00000014. Was 0x58 instead of 0x60
+
+ Command handler execution failed
+ in procedure 'verify_image' called at file "command.c", line 647
+ called at file "command.c", line 361
+ (gdb) +
+
FAIL
+ + + \ No newline at end of file diff --git a/testing/results/v0.4.0-rc1/SAM7.html b/testing/results/v0.4.0-rc1/SAM7.html new file mode 100755 index 000000000..a400a476f --- /dev/null +++ b/testing/results/v0.4.0-rc1/SAM7.html @@ -0,0 +1,853 @@ + + +Test results for revision 1.62 + + + + +

SAM7

+ +

Connectivity

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
CON001SAM7S64ZY1000Telnet connectionPower on, jtag target attachedOn console, type
telnet ip port
Open On-Chip Debugger
>
Open On-Chip Debugger
>
PASS
CON002SAM7S64ZY1000GDB server connectionPower on, jtag target attachedOn GDB console, type
target remote ip:port
Remote debugging using 10.0.0.73:3333 + (gdb) tar remo 10.0.0.73:3333
+ Remote debugging using 10.0.0.73:3333
+ 0x00100174 in ?? ()
+
PASS
+ +

Reset

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RES001SAM7S64ZY1000Reset halt on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ + > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > reset halt
+ SRST took 2ms to deassert
+ JTAG device found: 0x3f0f0f0f (Manufacturer: 0x787, Part: 0xf0f0, Version: 0x3)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0x600000d3 pc: 0x000003c4
+ > +
+
PASS
RES002SAM7S64ZY1000Reset init on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset init
Reset should return without error and the output should contain
executing reset script 'name_of_the_script'
+ + > reset init
+ SRST took 2ms to deassert
+ JTAG device found: 0x3f0f0f0f (Manufacturer: 0x787, Part: 0xf0f0, Version: 0x3)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0x600000d3 pc: 0x000003c0
+ > +
+
PASS
+ NOTE! Even if there is no message, the reset script is being executed (proved by side effects)
RES003SAM7S64ZY1000Reset after a power cycle of the targetReset the target then power cycle the targetConnect via the telnet interface and type
reset halt after the power was detected
Reset should return without error and the output should contain
target state: halted
+ + Sensed nSRST asserted
+ Sensed power dropout.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0xd5dff7e6
+ Sensed power restore.
+ Sensed nSRST deasserted
+ > reset halt
+ JTAG device found: 0x3f0f0f0f (Manufacturer: 0x787, Part: 0xf0f0, Version: 0x3)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0xf00000d3 pc: 0x0000072c
+ > +
+
PASS
RES004SAM7S64ZY1000Reset halt on a blank target where reset halt is supportedErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
pc = 0
+ + > reset halt
+ SRST took 2ms to deassert
+ JTAG device found: 0x3f0f0f0f (Manufacturer: 0x787, Part: 0xf0f0, Version: 0x3)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0x300000d3 pc: 0x000003c0 +
+
PASS
RES005SAM7S64ZY1000Reset halt on a blank target using return clockErase all the content of the flash, set the configuration script to use RCLKConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ + > jtag_khz 0
+ jtag_khz: 0
+ > reset init
+ SRST took 2ms to deassert
+ JTAG device found: 0x3f0f0f0f (Manufacturer: 0x787, Part: 0xf0f0, Version: 0x3)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0x300000d3 pc: 0x000003c0
+ executing event/sam7s256_reset.script
+ > +
+
PASS
+ +

JTAG Speed

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetZY1000DescriptionInitial stateInputExpected outputActual outputPass/Fail
SPD001SAM7S64ZY100016MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 16000
+ jtag_speed 4 => JTAG clk=16.000000
+ jtag_khz: 16000
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
+
PASS
SPD002SAM7S64ZY10008MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 8000
+ jtag_speed 8 => JTAG clk=8.000000
+ jtag_khz: 8000
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+
+
PASS
SPD003SAM7S64ZY10004MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 4000
+ jtag_speed 16 => JTAG clk=4.000000
+ jtag_khz: 4000
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
+
PASS
SPD004SAM7S64ZY10002MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 2000
+ jtag_speed 32 => JTAG clk=2.000000
+ jtag_khz: 2000
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
+
PASS
SPD005SAM7S64ZY1000RCLK on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + + > jtag_khz 0
+ jtag_khz: 0
+ > mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
+
PASS
+ +

Debugging

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
DBG001SAM7S64ZY1000Load is workingReset init is working, RAM is accesible, GDB server is startedOn the console of the OS:
+ arm-elf-gdb test_ram.elf
+ (gdb) target remote ip:port
+ (gdb) load +
Load should return without error, typical output looks like:
+ + Loading section .text, size 0x14c lma 0x0
+ Start address 0x40, load size 332
+ Transfer rate: 180 bytes/sec, 332 bytes/write.
+
+
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x200000
+ Start address 0x200040, load size 404
+ Transfer rate: 443 bytes/sec, 404 bytes/write.
+ (gdb) +
PASS
DBG002SAM7S64ZY1000Software breakpointLoad the test_ram.elf application, use instructions from GDB001In the GDB console:
+ + (gdb) monitor arm7_9 dbgrq enable
+ software breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0xec: file src/main.c, line 71.
+ (gdb) continue
+ Continuing. +
+
The software breakpoint should be reached, a typical output looks like:
+ + Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ + (gdb) monitor arm7_9 dbgrq enable
+ use of EmbeddedICE dbgrq instead of breakpoint for target halt enabled
+ (gdb) break main
+ Breakpoint 1 at 0x200134: file src/main.c, line 69.
+ (gdb) c
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ Current language: auto
+ The current source language is "auto; currently c".
+ (gdb) +
+
PASS
DBG003SAM7S64ZY1000Single step in a RAM applicationLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
(gdb) step
The next instruction should be reached, typical output:
+ + (gdb) step
+ 70 DWORD b = 2; + +
+
+ + (gdb) step
+ 70 DWORD b = 2; + (gdb) +
+
PASS
DBG004SAM7S64ZY1000Software break points are working after a resetLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
+ (gdb) monitor reset init
+ (gdb) load
+ (gdb) continue
+
The breakpoint should be reached, typical output:
+ + Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1; +
+
+ (gdb) monitor reset init
+ JTAG tap: sam7x256.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug-request, current mode: Supervisor
+ cpsr: 0x600000d3 pc: 0x0000031c
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x200000
+ Start address 0x200040, load size 404
+ Transfer rate: 26 KB/sec, 404 bytes/write.
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) +
PASS
DBG005SAM7S64ZY1000Hardware breakpointFlash the test_rom.elf application. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset init
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor arm7_9 force_hw_bkpts enable
+ force hardware breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+
+
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ + (gdb) monitor arm7_9 force_hw_bkpts enable
+ force hardware breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+ Continuing.
+ Note: automatically using hardware breakpoints for read-only addresses.
+ target state: halted
+ target halted in ARM state due to breakpoint, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x00100134
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) +
+
PASS
DBG006SAM7S64ZY1000Hardware breakpoint is set after a resetFollow the instructions to flash and insert a hardware breakpoint from DBG005In GDB, type
+ + (gdb) monitor reset
+ (gdb) monitor reg pc 0x100000
+ pc (/32): 0x00100000
+ (gdb) continue +

+ where the value inserted in PC is the start address of the application +
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ + (gdb) monitor reset init
+ SRST took 3ms to deassert
+ JTAG device found: 0x3f0f0f0f (Manufacturer: 0x787, Part: 0xf0f0, Version: 0x3)
+ srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+ target state: halted
+ target halted in ARM state due to debug request, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x00100168
+ executing event/sam7s256_reset.script
+ (gdb) monitor reg pc 0x100000
+ pc (/32): 0x00100000
+ (gdb) continue
+ Continuing.
+ target state: halted
+ target halted in ARM state due to single step, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x00100040
+ target state: halted
+ target halted in ARM state due to breakpoint, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x00100134
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) +
+
PASS
DBG007SAM7S64ZY1000Single step in ROMFlash the test_rom.elf application and set a breakpoint in main, use DBG005. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor arm7_9 force_hw_bkpts enable
+ force hardware breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) step +
+
The breakpoint should be reached, typical output:
+ + target state: halted
+ target halted in ARM state due to single step, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x0010013c
+ 70 DWORD b = 2;
+
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) step
+ target state: halted
+ target halted in ARM state due to single step, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x00100138
+ target state: halted
+ target halted in ARM state due to single step, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x0010013c
+ 70 DWORD b = 2;
+ (gdb) +
PASS
+ +

RAM access

+Note: these tests are not designed to test/debug the target, but to test functionalities! + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RAM001SAM7S64ZY100032 bit Write/read RAMReset init is workingOn the telnet interface
+ > mww ram_address 0xdeadbeef 16
+ > mdw ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 32bit long containing 0xdeadbeef.
+ + > mww 0x0 0xdeadbeef 16
+ > mdw 0x0 32
+ 0x00000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000040: e1a00000 e59fa51c e59f051c e04aa000 00080017 00009388 00009388 00009388
+ 0x00000060: 00009388 0002c2c0 0002c2c0 000094f8 000094f4 00009388 00009388 00009388
+
+
+ > mww 0x00200000 0xdeadbeef 16
+ > mdw 0x00200000 32
+ 0x00200000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00200020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00200040: e59f10b4 e3a00902 e5810004 e59f00ac e59f10ac e5810000 e3e010ff e59f00a4
+ 0x00200060: e5810060 e59f10a0 e3e00000 e5810130 e5810124 e321f0db e59fd090 e321f0d7 +
PASS
RAM002SAM7S64ZY100016 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwh ram_address 0xbeef 16
+ > mdh ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 16bit long containing 0xbeef.
+ + > mwh 0x0 0xbeef 16
+ > mdh 0x0 32
+ 0x00000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+ 0x00000020: 00e0 0000 021c 0000 0240 0000 026c 0000 0288 0000 0000 0000 0388 0000 0350 0000
+ > +
+
+ > mwh 0x00200000 0xbeef 16
+ > mdh 0x00200000 32
+ 0x00200000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+ 0x00200020: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 +
PASS
RAM003SAM7S64ZY10008 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwb ram_address 0xab 16
+ > mdb ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 8bit long containing 0xab.
+ + > mwb ram_address 0xab 16
+ > mdb ram_address 32
+ 0x00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ > +
+
+ > mwb 0x00200000 0xab 16
+ > mdb 0x00200000 32
+ 0x00200000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +
PASS
+ + + +

Flash access

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
FLA001SAM7S64ZY1000Flash probeReset init is workingOn the telnet interface:
+ > flash probe 0 +
The command should execute without error. The output should state the name of the flash and the starting address. An example of output:
+ flash 'ecosflash' found at 0x01000000 +
+ + > flash probe 0
+ flash 'at91sam7' found at 0x00100000 +
+
PASS
FLA002SAM7S64ZY1000flash fillwReset init is working, flash is probedOn the telnet interface
+ > flash fillw 0x100000 0xdeadbeef 16 + +
The commands should execute without error. The output looks like:
+ + wrote 64 bytes to 0x0100000 in 11.610000s (0.091516 kb/s) +
+ To verify the contents of the flash:
+ + > mdw 0x100000 32
+ 0x0100000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x0100020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x0100040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x0100060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+ > flash fillw 0x100000 0xdeadbeef 16
+ wrote 64 bytes to 0x00100000 in 0.040000s (26.562500 kb/s)
+ > mdw 0x100000 32
+ 0x00100000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00100020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00100040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00100060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
PASS
FLA003SAM7S64ZY1000Flash eraseReset init is working, flash is probedOn the telnet interface
+ > flash erase_address 0x100000 0x2000 + +
The commands should execute without error.
+ + erased address 0x0100000 length 8192 in 4.970000s + + To check that the flash has been erased, read at different addresses. The result should always be 0xff. + + > mdw 0x100000 32
+ 0x0100000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x0100020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x0100040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x0100060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+ > flash erase_address 0x100000 0x2000
+ erased address 0x00100000 length 8192 in 0.020000s
+ > mdw 0x100000 32
+ 0x00100000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00100020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00100040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x00100060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
PASS
FLA004SAM7S64ZY1000Loading to flash from GDBReset init is working, flash is probed, connectivity to GDB server is workingStart GDB using a ROM elf image, eg: arm-elf-gdb test_rom.elf.
+ + (gdb) target remote ip:port
+ (gdb) monitor reset halt
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor verify_image path_to_elf_file +
+
The output should look like:
+ + verified 404 bytes in 5.060000s +
+ The failure message is something like:
+ Verify operation failed address 0x00200000. Was 0x00 instead of 0x18 +
+ + (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 4 KB/sec, 404 bytes/write.
+ (gdb) moni verify_image /tftp/10.0.0.9/c:/temp/testing/examples/SAM7S256Test/test_rom.elf
+ verified 404 bytes in 0.570000s +
+
PASS
+ + + \ No newline at end of file diff --git a/testing/results/v0.4.0-rc1/STR710.html b/testing/results/v0.4.0-rc1/STR710.html new file mode 100755 index 000000000..1a18ad0e6 --- /dev/null +++ b/testing/results/v0.4.0-rc1/STR710.html @@ -0,0 +1,907 @@ + + +Test results for version 1.62 + + + + +

STR710

+ +

Connectivity

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
CON001STR912ZY1000Telnet connectionPower on, jtag target attachedOn console, type
telnet ip port
Open On-Chip Debugger
>
> telnet 10.0.0.142
+ Trying 10.0.0.142...
+ Connected to 10.0.0.142.
+ Escape character is '^]'.
+ Open On-Chip Debugger
+ > +
PASS
CON002STR912ZY1000GDB server connectionPower on, jtag target attachedOn GDB console, type
target remote ip:port
Remote debugging using 10.0.0.73:3333 + (gdb) tar remo 10.0.0.142:3333
+ Remote debugging using 10.0.0.142:3333
+ 0x00016434 in ?? ()
+ (gdb) +
PASS
+ +

Reset

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RES001STR912ZY1000Reset halt on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ +> mdw 0 32
+0x00000000: 75755000 8a930104 65696f65 939a3e98 214751f1 fa0edb9b 6664686d 931a989e
+0x00000020: 676c65e4 9a0a0982 25653445 da02ba90 c4ed3165 9b9a8a9a 65676365 01981292
+0x00000040: 212e0982 82ba3f8b 34674765 96ba1a9a 6175e7e5 9b9ab91a 0789644d 120a9a18
+0x00000060: 65446167 80d20982 6d6d6565 187090ca 65277d65 9a9a0b81 6960416c 9ffe88b8
+> reset
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+>
+
+
PASS
RES002STR912ZY1000Reset init on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset init
Reset should return without error and the output should contain
executing reset script 'name_of_the_script'
+ +> reset init
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+target state: halted
+target halted in ARM state due to debug-request, current mode: Undefined instruction
+cpsr: 0xf00000db pc: 0x00000004
+jtag_speed 10 => JTAG clk=6.400000
+6400 kHz +
+
PASS
RES003STR912ZY1000Reset after a power cycle of the targetReset the target then power cycle the targetConnect via the telnet interface and type
reset halt after the power was detected
Reset should return without error and the output should contain
target state: halted
+ + nsed power dropout.
+ nsed power dropout.
+ nsed nSRST deasserted.
+ invalid mode value encountered 0
+cpsr contains invalid mode value - communication failure
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x100000d3 pc: 0x0000001c
+jtag_speed 10 => JTAG clk=6.400000
+6400 kHz
+ nsed power restore.
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x500000d3 pc: 0x00000000
+jtag_speed 10 => JTAG clk=6.400000
+6400 kHz
+> reset init
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x500000d3 pc: 0x00000000
+jtag_speed 10 => JTAG clk=6.400000
+6400 kHz
+> +
+
PASS
RES004STR912ZY1000Reset halt on a blank target where reset halt is supportedErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ +> reset halt
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x200000d3 pc: 0xfe50cba4
+> +
+
PASS
RES005STR912ZY1000Reset halt on a blank target using return clockErase all the content of the flash, set the configuration script to use RCLKConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ + > jtag_khz 0
+RCLK - adaptive
+RCLK timeout
+RCLK timeout
+RCLK timeout
+ > reset halt
+ RCLK timeout
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x200000d3 pc: 0xfe50cb50
+
+
FAIL
+ +

JTAG Speed

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetZY1000DescriptionInitial stateInputExpected outputActual outputPass/Fail
SPD001STR912ZY100016MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 16000
+jtag_speed 4 => JTAG clk=16.000000
+16000 kHz
+> mdw 0 32
+0x00000000: 75755000 8a930104 65696f65 939a3e98 214751f1 fa0edb9b 6664686d 931a989e
+0x00000020: 676c65e4 9a0a0982 25653445 da02ba90 c4ed3165 9b9a8a9a 65676365 01981292
+0x00000040: 212e0982 82ba3f8b 34674765 96ba1a9a 6175e7e5 9b9ab91a 0789644d 120a9a18
+0x00000060: 65446167 80d20982 6d6d6565 187090ca 65277d65 9a9a0b81 6960416c 9ffe88b8
+> +
+
PASS
SPD002STR912ZY10008MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 8000
+jtag_speed 8 => JTAG clk=8.000000
+8000 kHz
+> mdw 0 32
+0x00000000: 75755000 8a930104 65696f65 939a3e98 214751f1 fa0edb9b 6664686d 931a989e
+0x00000020: 676c65e4 9a0a0982 25653445 da02ba90 c4ed3165 9b9a8a9a 65676365 01981292
+0x00000040: 212e0982 82ba3f8b 34674765 96ba1a9a 6175e7e5 9b9ab91a 0789644d 120a9a18
+0x00000060: 65446167 80d20982 6d6d6565 187090ca 65277d65 9a9a0b81 6960416c 9ffe88b8
+> +
+
PASS
SPD003STR912ZY10004MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 4000
+jtag_speed 16 => JTAG clk=4.000000
+4000 kHz
+> mdw 0 32
+0x00000000: 75755000 8a930104 65696f65 939a3e98 214751f1 fa0edb9b 6664686d 931a989e
+0x00000020: 676c65e4 9a0a0982 25653445 da02ba90 c4ed3165 9b9a8a9a 65676365 01981292
+0x00000040: 212e0982 82ba3f8b 34674765 96ba1a9a 6175e7e5 9b9ab91a 0789644d 120a9a18
+0x00000060: 65446167 80d20982 6d6d6565 187090ca 65277d65 9a9a0b81 6960416c 9ffe88b8
+> +
+
PASS
SPD004STR912ZY10002MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> > jtag_khz 2000
+jtag_speed 32 => JTAG clk=2.000000
+2000 kHz
+> mdw 0 32
+0x00000000: 75755000 8a930104 65696f65 939a3e98 214751f1 fa0edb9b 6664686d 931a989e
+0x00000020: 676c65e4 9a0a0982 25653445 da02ba90 c4ed3165 9b9a8a9a 65676365 01981292
+0x00000040: 212e0982 82ba3f8b 34674765 96ba1a9a 6175e7e5 9b9ab91a 0789644d 120a9a18
+0x00000060: 65446167 80d20982 6d6d6565 187090ca 65277d65 9a9a0b81 6960416c 9ffe88b8
+> +
+
PASS
SPD005STR912ZY1000RCLK on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 0
+RCLK - adaptive
+RCLK timeout
+RCLK timeout
+RCLK timeout +
+
FAIL
+ +

Debugging

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
DBG001STR912ZY1000Load is workingReset init is working, RAM is accesible, GDB server is startedOn the console of the OS:
+ arm-elf-gdb test_ram.elf
+ (gdb) target remote ip:port
+ (gdb) load +
Load should return without error, typical output looks like:
+ + Loading section .text, size 0x14c lma 0x0
+ Start address 0x40, load size 332
+ Transfer rate: 180 bytes/sec, 332 bytes/write.
+
+
+(gdb) load
+Loading section .text, size 0x1cc lma 0x20000000
+Loading section .vectors, size 0x40 lma 0x200001cc
+Loading section .rodata, size 0x4 lma 0x2000020c
+Start address 0x20000000, load size 528
+Transfer rate: 64 KB/sec, 176 bytes/write.
+(gdb) +
PASS
DBG002STR912ZY1000Software breakpointLoad the test_ram.elf application, use instructions from GDB001In the GDB console:
+ + (gdb) monitor gdb_breakpoint_override soft
+ force soft breakpoints
+ (gdb) break main
+ Breakpoint 1 at 0xec: file src/main.c, line 71.
+ (gdb) continue
+ Continuing. +
+
The software breakpoint should be reached, a typical output looks like:
+ + target state: halted
+ target halted in ARM state due to breakpoint, current mode: Supervisor
+ cpsr: 0x000000d3 pc: 0x000000ec
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1; +
+
+ +(gdb) monitor gdb_breakpoint_override soft
+force soft breakpoints
+Current language: auto
+The current source language is "auto; currently asm".
+(gdb) break main
+Breakpoint 1 at 0x20000170: file src/main.c, line 69.
+(gdb) c
+Continuing.
+
+Breakpoint 1, main () at src/main.c:69
+69 DWORD a = 1;
+Current language: auto
+The current source language is "auto; currently c".
+(gdb) +
+
PASS
DBG003STR912ZY1000Single step in a RAM applicationLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
(gdb) step
The next instruction should be reached, typical output:
+ + (gdb) step
+ target state: halted
+ target halted in ARM state due to single step, current mode: Abort
+ cpsr: 0x20000097 pc: 0x000000f0
+ target state: halted
+ target halted in ARM state due to single step, current mode: Abort
+ cpsr: 0x20000097 pc: 0x000000f4
+ 72 DWORD b = 2; +
+
+ + (gdb) step
+ 70 DWORD b = 2;
+ (gdb) +
+
PASS
DBG004STR912ZY1000Software break points are working after a resetLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
+ (gdb) monitor reset init
+ (gdb) load
+ (gdb) continue
+
The breakpoint should be reached, typical output:
+ + target state: halted
+ target halted in ARM state due to breakpoint, current mode: Supervisor
+ cpsr: 0x000000d3 pc: 0x000000ec
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1; +
+
+((gdb) monitor reset init
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x60000013 pc: 0x200001bc
+jtag_speed 10 => JTAG clk=6.400000
+6400 kHz
+(gdb) load
+Loading section .text, size 0x1cc lma 0x20000000
+Loading section .vectors, size 0x40 lma 0x200001cc
+Loading section .rodata, size 0x4 lma 0x2000020c
+Start address 0x20000000, load size 528
+Transfer rate: 64 KB/sec, 176 bytes/write.
+(gdb) c
+Continuing.
+
+Breakpoint 1, main () at src/main.c:69
+69 DWORD a = 1;
+(gdb) +
PASS
DBG005STR912ZY1000Hardware breakpointFlash the test_rom.elf application. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset init
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor gdb_breakpoint_override hard
+ force hard breakpoints
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+
+
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ +(gdb) monitor gdb_breakpoint_override hard
+force hard breakpoints
+(gdb) break main
+Breakpoint 1 at 0x40000170: file src/main.c, line 69.
+(gdb) c
+Continuing.
+Note: automatically using hardware breakpoints for read-only addresses.
+
+Breakpoint 1, main () at src/main.c:69
+69 DWORD a = 1;
+Current language: auto
+The current source language is "auto; currently c".
+(gdb) +
+
PASS
DBG006STR912ZY1000Hardware breakpoint is set after a resetFollow the instructions to flash and insert a hardware breakpoint from DBG005In GDB, type
+ + (gdb) monitor reset
+ (gdb) monitor reg pc 0x100000
+ pc (/32): 0x00100000
+ (gdb) continue +

+ where the value inserted in PC is the start address of the application +
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ +(gdb) monitor reset init
+jtag_speed 6400 => JTAG clk=0.010000
+10 kHz
+JTAG tap: str710.cpu tap/device found: 0x3f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x3)
+srst pulls trst - can not reset into halted mode. Issuing halt after reset.
+target state: halted
+target halted in ARM state due to debug-request, current mode: Undefined instruction
+cpsr: 0x400000db pc: 0x010aea80
+jtag_speed 10 => JTAG clk=6.400000
+6400 kHz
+(gdb) monitor reg pc 0x40000000
+pc (/32): 0x40000000
+(gdb) c
+Continuing.
+
+Breakpoint 1, main () at src/main.c:69
+69 DWORD a = 1;
+Current language: auto
+The current source language is "auto; currently c".
+(gdb) +
+
PASS
DBG007STR912ZY1000Single step in ROMFlash the test_rom.elf application and set a breakpoint in main, use DBG005. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor arm7_9 force_hw_bkpts enable
+ force hardware breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) step +
+
The breakpoint should be reached, typical output:
+ + target state: halted
+ target halted in ARM state due to single step, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x0010013c
+ 70 DWORD b = 2;
+
+
+Breakpoint 2, main () at src/main.c:69
+69 DWORD a = 1;
+Current language: auto
+The current source language is "auto; currently c".
+(gdb) step
+70 DWORD b = 2;
+(gdb) +
PASS
+ +

RAM access

+Note: these tests are not designed to test/debug the target, but to test functionalities! + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RAM001STR912ZY100032 bit Write/read RAMReset init is workingOn the telnet interface
+ > mww ram_address 0xdeadbeef 16
+ > mdw ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 32bit long containing 0xdeadbeef.
+ + > mww 0x0 0xdeadbeef 16
+ > mdw 0x0 32
+ 0x00000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000040: e1a00000 e59fa51c e59f051c e04aa000 00080017 00009388 00009388 00009388
+ 0x00000060: 00009388 0002c2c0 0002c2c0 000094f8 000094f4 00009388 00009388 00009388
+
+
+> mww 0x20000000 0xdeadbeef 16
+> mdw 0x20000000 32
+0x20000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+0x20000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+0x20000040: e3a0020a e3a01073 e5801018 e5901008 e3110002 0afffffc e3a0020a e59f10d0
+0x20000060: e5801008 e321f0db e59fd0c8 e321f0d7 e59fd0c4 e321f0d1 e59fd0c0 e321f0d2
+> +
PASS
RAM002STR912ZY100016 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwh ram_address 0xbeef 16
+ > mdh ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 16bit long containing 0xbeef.
+ + > mwh 0x0 0xbeef 16
+ > mdh 0x0 32
+ 0x00000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+ 0x00000020: 00e0 0000 021c 0000 0240 0000 026c 0000 0288 0000 0000 0000 0388 0000 0350 0000
+ > +
+
+> mwh 0x20000000 0xbeef 16
+> mdh 0x20000000 32
+0x20000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+0x20000020: beef dead beef dead beef dead beef dead beef dead beef dead beef dead beef dead
+> +
PASS
RAM003STR912ZY10008 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwb ram_address 0xab 16
+ > mdb ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 8bit long containing 0xab.
+ + > mwb ram_address 0xab 16
+ > mdb ram_address 32
+ 0x00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ > +
+
+> mwb 0x20000000 0xab 16
+> mdb 0x20000000 32
+0x20000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ef be ef be ef be ef be ef be ef be ef be ef be
+> +
PASS
+ + + +

Flash access

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
FLA001STR912ZY1000Flash probeReset init is workingOn the telnet interface:
+ > flash probe 0 +
The command should execute without error. The output should state the name of the flash and the starting address. An example of output:
+ flash 'ecosflash' found at 0x01000000 +
+ + > flash probe 0
+ flash 'str7x' found at 0x40000000
+ > +
+
PASS
FLA002STR912ZY1000flash fillwReset init is working, flash is probedOn the telnet interface
+ > flash fillw 0x1000000 0xdeadbeef 16 + +
The commands should execute without error. The output looks like:
+ + wrote 64 bytes to 0x01000000 in 11.610000s (0.091516 kb/s) +
+ To verify the contents of the flash:
+ + > mdw 0x1000000 32
+ 0x01000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x01000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+ > flash fillw 0x40000000 0xdeadbeef 16
+ wrote 64 bytes to 0x40000000 in 0.000000s (inf kb/s)
+ > mdw 0x40000000 32
+ 0x40000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x40000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x40000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x40000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ > +
PASS
FLA003STR912ZY1000Flash eraseReset init is working, flash is probedOn the telnet interface
+ > flash erase_address 0x1000000 0x2000 + +
The commands should execute without error.
+ + erased address 0x01000000 length 8192 in 4.970000s + + To check that the flash has been erased, read at different addresses. The result should always be 0xff. + + > mdw 0x1000000 32
+ 0x01000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+> flash erase_address 0x40000000 0x2000
+erased address 0x40000000 (length 8192) in 0.270000s (29.630 kb/s)
+> mdw 0x40000000 32
+0x40000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x40000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x40000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x40000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+> +
PASS
FLA004STR912ZY1000Loading to flash from GDBReset init is working, flash is probed, connectivity to GDB server is workingStart GDB using a ROM elf image, eg: arm-elf-gdb test_rom.elf.
+ + (gdb) target remote ip:port
+ (gdb) monitor reset
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write. + (gdb) monitor verify_image path_to_elf_file +
+
The output should look like:
+ + verified 404 bytes in 5.060000s +
+ The failure message is something like:
+ Verify operation failed address 0x00200000. Was 0x00 instead of 0x18 +
+ +(gdb) load
+Loading section .text, size 0x1cc lma 0x40000000
+Loading section .vectors, size 0x40 lma 0x400001cc
+Loading section .rodata, size 0x4 lma 0x4000020c
+Start address 0x40000000, load size 528
+Transfer rate: 53 bytes/sec, 176 bytes/write.
+(gdb) monitor verify_image /tftp/10.0.0.194/test_rom.elf
+verified 528 bytes in 4.760000s (0.108 kb/s)
+Current language: auto
+The current source language is "auto; currently asm".
+(gdb) +
+
PASS
+ + + \ No newline at end of file diff --git a/testing/results/v0.4.0-rc1/STR912.html b/testing/results/v0.4.0-rc1/STR912.html new file mode 100755 index 000000000..c8df03488 --- /dev/null +++ b/testing/results/v0.4.0-rc1/STR912.html @@ -0,0 +1,1008 @@ + + +Test results for version 1.62 + + + + +

STR912

+ +

Connectivity

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
CON001STR912ZY1000Telnet connectionPower on, jtag target attachedOn console, type
telnet ip port
Open On-Chip Debugger
>
> telnet 10.0.0.142
+ Trying 10.0.0.142...
+ Connected to 10.0.0.142.
+ Escape character is '^]'.
+ Open On-Chip Debugger
+ > +
PASS
CON002STR912ZY1000GDB server connectionPower on, jtag target attachedOn GDB console, type
target remote ip:port
Remote debugging using 10.0.0.73:3333 + (gdb) tar remo 10.0.0.142:3333
+ Remote debugging using 10.0.0.142:3333
+ 0x00016434 in ?? ()
+ (gdb) +
PASS
+ +

Reset

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RES001STR912ZY1000Reset halt on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ +> reset halt
+RCLK - adaptive
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (mfg: 0x020, part: 0x4570, ver: 0x0)
+JTAG tap: str912.cpu tap/device found: 0x25966041 (mfg: 0x020, part: 0x5966, ver: 0x2)
+JTAG tap: str912.bs tap/device found: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs UNEXPECTED: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs expected 1 of 1: 0x1457f041 (mfg: 0x020, part: 0x457f, ver: 0x1)
+Trying to use configured scan chain anyway...
+Bypassing JTAG setup events due to errors
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
+> +
+
PASS
RES002STR912ZY1000Reset init on a blank targetErase all the content of the flashConnect via the telnet interface and type
reset init
Reset should return without error and the output should contain
executing reset script 'name_of_the_script'
+ +> reset init
+RCLK - adaptive
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (mfg: 0x020, part: 0x4570, ver: 0x0)
+JTAG tap: str912.cpu tap/device found: 0x25966041 (mfg: 0x020, part: 0x5966, ver: 0x2)
+JTAG tap: str912.bs tap/device found: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs UNEXPECTED: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs expected 1 of 1: 0x1457f041 (mfg: 0x020, part: 0x457f, ver: 0x1)
+Trying to use configured scan chain anyway...
+Bypassing JTAG setup events due to errors
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+cleared protection for sectors 0 through 7 on flash bank 0
+NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
+> +
+
PASS
RES003STR912ZY1000Reset after a power cycle of the targetReset the target then power cycle the targetConnect via the telnet interface and type
reset halt after the power was detected
Reset should return without error and the output should contain
target state: halted
+ + nsed nSRST asserted.
+ nsed power dropout.
+ nsed power restore.
+RCLK - adaptive
+SRST took 85ms to deassert
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (mfg: 0x020, part: 0x4570, ver: 0x0)
+JTAG tap: str912.cpu tap/device found: 0x25966041 (mfg: 0x020, part: 0x5966, ver: 0x2)
+JTAG tap: str912.bs tap/device found: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs UNEXPECTED: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs expected 1 of 1: 0x1457f041 (mfg: 0x020, part: 0x457f, ver: 0x1)
+Trying to use configured scan chain anyway...
+Bypassing JTAG setup events due to errors
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+cleared protection for sectors 0 through 7 on flash bank 0
+NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
+> reset halt
+RCLK - adaptive
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (mfg: 0x020, part: 0x4570, ver: 0x0)
+JTAG tap: str912.cpu tap/device found: 0x25966041 (mfg: 0x020, part: 0x5966, ver: 0x2)
+JTAG tap: str912.bs tap/device found: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs UNEXPECTED: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs expected 1 of 1: 0x1457f041 (mfg: 0x020, part: 0x457f, ver: 0x1)
+Trying to use configured scan chain anyway...
+Bypassing JTAG setup events due to errors
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
+> +
+
PASS
RES004STR912ZY1000Reset halt on a blank target where reset halt is supportedErase all the content of the flashConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
pc = 0
+ +> reset halt
+ RCLK - adaptive
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (Manufacturer: 0x020, Part: 0x4570, Version: 0x0)
+JTAG Tap/device matched
+JTAG tap: str912.cpu tap/device found: 0x25966041 (Manufacturer: 0x020, Part: 0x5966, Version: 0x2)
+JTAG Tap/device matched
+JTAG tap: str912.bs tap/device found: 0x2457f041 (Manufacturer: 0x020, Part: 0x457f, Version: 0x2)
+JTAG Tap/device matched
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+> +
PASS
RES005STR912ZY1000Reset halt on a blank target using return clockErase all the content of the flash, set the configuration script to use RCLKConnect via the telnet interface and type
reset halt
Reset should return without error and the output should contain
target state: halted
+ + > reset halt
+RCLK - adaptive
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (mfg: 0x020, part: 0x4570, ver: 0x0)
+JTAG tap: str912.cpu tap/device found: 0x25966041 (mfg: 0x020, part: 0x5966, ver: 0x2)
+JTAG tap: str912.bs tap/device found: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs UNEXPECTED: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs expected 1 of 1: 0x1457f041 (mfg: 0x020, part: 0x457f, ver: 0x1)
+Trying to use configured scan chain anyway...
+Bypassing JTAG setup events due to errors
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
+> +
+
PASS
+ +

JTAG Speed

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetZY1000DescriptionInitial stateInputExpected outputActual outputPass/Fail
SPD001STR912ZY100016MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 16000
+jtag_speed 4 => JTAG clk=16.000000
+16000 kHz
+ThumbEE -- incomplete support
+target state: halted
+target halted in ThumbEE state due to debug-request, current mode: System
+cpsr: 0xfdfdffff pc: 0xfdfdfff9
+> mdw 0 32
+0x00000000: 00000000 00000000 ffffffff ffffffff 00000001 ffffffff 00000001 ffffffff
+0x00000020: 00000001 00000001 00000001 00000001 00000001 fffffffe fffffffe 00000001
+0x00000040: fffffffe 00000000 00000000 00000000 00000000 00000000 00000000 00000000
+0x00000060: 00000000 00000000 00000000 00000000 ffffffff ffffffff 00000001 00000000
+invalid mode value encountered 0
+cpsr contains invalid mode value - communication failure
+ThumbEE -- incomplete support
+target state: halted
+target halted in ThumbEE state due to debug-request, current mode: System
+cpsr: 0xffffffff pc: 0xfffffff8
+> +
+
FAIL
SPD002STR912ZY10008MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 8000
+jtag_speed 8 => JTAG clk=8.000000
+8000 kHz
+> halt
+invalid mode value encountered 0
+cpsr contains invalid mode value - communication failure
+Command handler execution failed
+in procedure 'halt' called at file "command.c", line 647
+called at file "command.c", line 361
+Halt timed out, wake up GDB.
+> +
+
FAIL
SPD003STR912ZY10004MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 4000
+jtag_speed 16 => JTAG clk=4.000000
+4000 kHz
+> halt
+> mdw 0 32
+0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+> +
+
PASS
SPD004STR912ZY10002MHz on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 2000
+jtag_speed 32 => JTAG clk=2.000000
+2000 kHz
+> halt
+> mdw 0 32
+0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+> +
+
PASS
SPD005STR912ZY1000RCLK on normal operationReset init the target according to RES002 Change speed and exercise a memory access over the JTAG, for example
mdw 0x0 32
The command should run without any errors. If any JTAG checking errors happen, the test failed + +> jtag_khz 0
+RCLK - adaptive
+> halt
+> mdw 0 32
+0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+> +
+
PASS
+ +

Debugging

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
DBG001STR912ZY1000Load is workingReset init is working, RAM is accesible, GDB server is startedOn the console of the OS:
+ arm-elf-gdb test_ram.elf
+ (gdb) target remote ip:port
+ (gdb) load +
Load should return without error, typical output looks like:
+ + Loading section .text, size 0x14c lma 0x0
+ Start address 0x40, load size 332
+ Transfer rate: 180 bytes/sec, 332 bytes/write.
+
+
+(gdb) load
+Loading section .text, size 0x1a0 lma 0x4000000
+Loading section .rodata, size 0x4 lma 0x40001a0
+Start address 0x4000000, load size 420
+Transfer rate: 29 KB/sec, 210 bytes/write.
+(gdb) +
PASS
DBG002STR912ZY1000Software breakpointLoad the test_ram.elf application, use instructions from GDB001In the GDB console:
+ + (gdb) monitor gdb_breakpoint_override soft
+ force soft breakpoints
+ (gdb) break main
+ Breakpoint 1 at 0xec: file src/main.c, line 71.
+ (gdb) continue
+ Continuing. +
+
The software breakpoint should be reached, a typical output looks like:
+ + target state: halted
+ target halted in ARM state due to breakpoint, current mode: Supervisor
+ cpsr: 0x000000d3 pc: 0x000000ec
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1; +
+
+ +(gdb) monitor gdb_breakpoint_override soft
+force soft breakpoints
+Current language: auto
+The current source language is "auto; currently asm".
+(gdb) break main
+Breakpoint 1 at 0x4000144: file src/main.c, line 69.
+(gdb) c
+Continuing.
+
+Breakpoint 1, main () at src/main.c:69
+warning: Source file is more recent than executable.
+69 DWORD a = 1;
+Current language: auto
+The current source language is "auto; currently c".
+(gdb) +
+
PASS
DBG003STR912ZY1000Single step in a RAM applicationLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
(gdb) step
The next instruction should be reached, typical output:
+ + (gdb) step
+ target state: halted
+ target halted in ARM state due to single step, current mode: Abort
+ cpsr: 0x20000097 pc: 0x000000f0
+ target state: halted
+ target halted in ARM state due to single step, current mode: Abort
+ cpsr: 0x20000097 pc: 0x000000f4
+ 72 DWORD b = 2; +
+
+ + (gdb) step
+ 70 DWORD b = 2;
+ (gdb)
+
+
PASS
DBG004STR912ZY1000Software break points are working after a resetLoad the test_ram.elf application, use instructions from GDB001, break in main using the instructions from GDB002In GDB, type
+ (gdb) monitor reset init
+ (gdb) load
+ (gdb) continue
+
The breakpoint should be reached, typical output:
+ + target state: halted
+ target halted in ARM state due to breakpoint, current mode: Supervisor
+ cpsr: 0x000000d3 pc: 0x000000ec
+
+ Breakpoint 1, main () at src/main.c:71
+ 71 DWORD a = 1; +
+
+(gdb) monitor reset init
+RCLK - adaptive
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (mfg: 0x020, part: 0x4570, ver: 0x0)
+JTAG tap: str912.cpu tap/device found: 0x25966041 (mfg: 0x020, part: 0x5966, ver: 0x2)
+JTAG tap: str912.bs tap/device found: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs UNEXPECTED: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs expected 1 of 1: 0x1457f041 (mfg: 0x020, part: 0x457f, ver: 0x1)
+Trying to use configured scan chain anyway...
+Bypassing JTAG setup events due to errors
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+cleared protection for sectors 0 through 7 on flash bank 0
+NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
+(gdb) load
+Loading section .text, size 0x1a0 lma 0x4000000
+Loading section .rodata, size 0x4 lma 0x40001a0
+Start address 0x4000000, load size 420
+Transfer rate: 25 KB/sec, 210 bytes/write.
+(gdb) c
+Continuing.
+
+Breakpoint 1, main () at src/main.c:69
+69 DWORD a = 1;
+(gdb) +
PASS
DBG005STR912ZY1000Hardware breakpointFlash the test_rom.elf application. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset init
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor gdb_breakpoint_override hard
+ force hard breakpoints
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+
+
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ +(gdb) monitor reset init
+RCLK - adaptive
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (mfg: 0x020, part: 0x4570, ver: 0x0)
+JTAG tap: str912.cpu tap/device found: 0x25966041 (mfg: 0x020, part: 0x5966, ver: 0x2)
+JTAG tap: str912.bs tap/device found: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs UNEXPECTED: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs expected 1 of 1: 0x1457f041 (mfg: 0x020, part: 0x457f, ver: 0x1)
+Trying to use configured scan chain anyway...
+Bypassing JTAG setup events due to errors
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+cleared protection for sectors 0 through 7 on flash bank 0
+NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
+(gdb) load
+Loading section .text, size 0x1a0 lma 0x0
+Loading section .rodata, size 0x4 lma 0x1a0
+Start address 0x0, load size 420
+Transfer rate: 426 bytes/sec, 210 bytes/write.
+(gdb) monitor gdb_breakpoint_override hard
+force hard breakpoints
+(gdb) break main
+Breakpoint 1 at 0x144: file src/main.c, line 69.
+(gdb) continue
+Continuing.
+Note: automatically using hardware breakpoints for read-only addresses.
+
+Breakpoint 1, main () at src/main.c:69
+warning: Source file is more recent than executable.
+69 DWORD a = 1;
+Current language: auto
+The current source language is "auto; currently c".
+(gdb) +
+
PASS
DBG006STR912ZY1000Hardware breakpoint is set after a resetFollow the instructions to flash and insert a hardware breakpoint from DBG005In GDB, type
+ + (gdb) monitor reset
+ (gdb) monitor reg pc 0x100000
+ pc (/32): 0x00100000
+ (gdb) continue +

+ where the value inserted in PC is the start address of the application +
The breakpoint should be reached, typical output:
+ + Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+
+
+ +(gdb) monitor reset init
+RCLK - adaptive
+SRST took 2ms to deassert
+JTAG tap: str912.flash tap/device found: 0x04570041 (mfg: 0x020, part: 0x4570, ver: 0x0)
+JTAG tap: str912.cpu tap/device found: 0x25966041 (mfg: 0x020, part: 0x5966, ver: 0x2)
+JTAG tap: str912.bs tap/device found: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs UNEXPECTED: 0x2457f041 (mfg: 0x020, part: 0x457f, ver: 0x2)
+JTAG tap: str912.bs expected 1 of 1: 0x1457f041 (mfg: 0x020, part: 0x457f, ver: 0x1)
+Trying to use configured scan chain anyway...
+Bypassing JTAG setup events due to errors
+SRST took 2ms to deassert
+target state: halted
+target halted in ARM state due to debug-request, current mode: Supervisor
+cpsr: 0x000000d3 pc: 0x00000000
+cleared protection for sectors 0 through 7 on flash bank 0
+NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
+(gdb) c
+Continuing.
+
+Breakpoint 1, main () at src/main.c:69
+69 DWORD a = 1;
+(gdb) +
+
PASS
DBG007STR912ZY1000Single step in ROMFlash the test_rom.elf application and set a breakpoint in main, use DBG005. Make this test after FLA004 has passedBe sure that gdb_memory_map and gdb_flash_program are enabled. In GDB, type
+ + (gdb) monitor reset
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write.
+ (gdb) monitor arm7_9 force_hw_bkpts enable
+ force hardware breakpoints enabled
+ (gdb) break main
+ Breakpoint 1 at 0x100134: file src/main.c, line 69.
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 1, main () at src/main.c:69
+ 69 DWORD a = 1;
+ (gdb) step +
+
The breakpoint should be reached, typical output:
+ + target state: halted
+ target halted in ARM state due to single step, current mode: Supervisor
+ cpsr: 0x60000013 pc: 0x0010013c
+ 70 DWORD b = 2;
+
+
+ (gdb) c
+Continuing.
+
+Breakpoint 2, main () at src/main.c:69
+69 DWORD a = 1;
+Current language: auto
+The current source language is "auto; currently c".
+(gdb) step
+70 DWORD b = 2;
+(gdb) +
PASS
+ +

RAM access

+Note: these tests are not designed to test/debug the target, but to test functionalities! + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
RAM001STR912ZY100032 bit Write/read RAMReset init is workingOn the telnet interface
+ > mww ram_address 0xdeadbeef 16
+ > mdw ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 32bit long containing 0xdeadbeef.
+ + > mww 0x0 0xdeadbeef 16
+ > mdw 0x0 32
+ 0x00000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x00000040: e1a00000 e59fa51c e59f051c e04aa000 00080017 00009388 00009388 00009388
+ 0x00000060: 00009388 0002c2c0 0002c2c0 000094f8 000094f4 00009388 00009388 00009388
+
+
+> mww 0x4000000 0xdeadbeef 16
+> mdw 0x4000000 32
+0x04000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+0x04000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+0x04000040: e580100c e3a01802 e5801010 e3a01018 e5801018 e59f00a8 e59f10a8 e5801000
+0x04000060: e3a00806 ee2f0f11 e321f0d7 e59fd098 e321f0db e59fd094 e321f0d3 e59fd090
+> +
PASS
RAM002STR912ZY100016 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwh ram_address 0xbeef 16
+ > mdh ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 16bit long containing 0xbeef.
+ + > mwh 0x0 0xbeef 16
+ > mdh 0x0 32
+ 0x00000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+ 0x00000020: 00e0 0000 021c 0000 0240 0000 026c 0000 0288 0000 0000 0000 0388 0000 0350 0000
+ > +
+
+> mwh 0x4000000 0xbeef 16
+> mdh 0x4000000 32
+0x04000000: beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef beef
+0x04000020: beef dead beef dead beef dead beef dead beef dead beef dead beef dead beef dead
+> +
PASS
RAM003STR912ZY10008 bit Write/read RAMReset init is workingOn the telnet interface
+ > mwb ram_address 0xab 16
+ > mdb ram_address 32 +
+
The commands should execute without error. A clear failure is a memory access exception. The result of running the commands should be a list of 16 locations 8bit long containing 0xab.
+ + > mwb ram_address 0xab 16
+ > mdb ram_address 32
+ 0x00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ > +
+
+> mwb 0x4000000 0xab 16
+> mdb 0x4000000 32
+0x04000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ef be ef be ef be ef be ef be ef be ef be ef be
+> +
PASS
+ + + +

Flash access

+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
IDTargetInterfaceDescriptionInitial stateInputExpected outputActual outputPass/Fail
FLA001STR912ZY1000Flash probeReset init is workingOn the telnet interface:
+ > flash probe 0 +
The command should execute without error. The output should state the name of the flash and the starting address. An example of output:
+ flash 'ecosflash' found at 0x01000000 +
+ + > flash probe 0
+ flash 'str9x' found at 0x00000000
+ > +
+
PASS
FLA002STR912ZY1000flash fillwReset init is working, flash is probedOn the telnet interface
+ > flash fillw 0x1000000 0xdeadbeef 16 + +
The commands should execute without error. The output looks like:
+ + wrote 64 bytes to 0x01000000 in 11.610000s (0.091516 kb/s) +
+ To verify the contents of the flash:
+ + > mdw 0x1000000 32
+ 0x01000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x01000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+> flash fillw 0x0 0xdeadbeef 16
+wrote 64 bytes to 0x00000000 in 0.020000s (3.125 kb/s)
+> mdw 0 32
+0x00000000: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+0x00000020: deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef deadbeef
+0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+> +
PASS
FLA003STR912ZY1000Flash eraseReset init is working, flash is probedOn the telnet interface
+ > flash erase_address 0x1000000 0x20000 + +
The commands should execute without error.
+ + erased address 0x01000000 length 131072 in 4.970000s
+
+ To check that the flash has been erased, read at different addresses. The result should always be 0xff.
+ + > mdw 0x1000000 32
+ 0x01000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+> flash erase_address 0 0x20000
+erased address 0x00000000 (length 131072) in 1.970000s (64.975 kb/s)
+> mdw 0 32
+0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+> +
PASS
FLA004STR912ZY1000Entire flash eraseReset init is working, flash is probedOn the telnet interface
+ > flash erase_address 0x0 0x80000 + +
The commands should execute without error.
+ + erased address 0x01000000 length 8192 in 4.970000s
+
+ To check that the flash has been erased, read at different addresses. The result should always be 0xff.
+ + > mdw 0x1000000 32
+ 0x01000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+ 0x01000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
+
+> flash erase_address 0 0x80000
+ erased address 0x00000000 length 524288 in 1.020000s
+
+> mdw 0 32
+ 0x00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
+0x00000060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff +
PASS
FLA005STR912ZY1000Loading to flash from GDBReset init is working, flash is probed, connectivity to GDB server is workingStart GDB using a ROM elf image, eg: arm-elf-gdb test_rom.elf.
+ + (gdb) target remote ip:port
+ (gdb) monitor reset
+ (gdb) load
+ Loading section .text, size 0x194 lma 0x100000
+ Start address 0x100040, load size 404
+ Transfer rate: 179 bytes/sec, 404 bytes/write. + (gdb) monitor verify_image path_to_elf_file +
+
The output should look like:
+ + verified 404 bytes in 5.060000s +
+ The failure message is something like:
+ Verify operation failed address 0x00200000. Was 0x00 instead of 0x18 +
+ +(gdb) load
+Loading section .text, size 0x1a0 lma 0x0
+Loading section .rodata, size 0x4 lma 0x1a0
+Start address 0x0, load size 420
+Transfer rate: 425 bytes/sec, 210 bytes/write.
+(gdb) moni verify_image /tftp/10.0.0.194/test_rom.elf
+verified 420 bytes in 0.350000s (1.172 kb/s)
+(gdb) +
+
PASS
+ + + \ No newline at end of file