From b5a6ba46aaed530a4b1397b9617de0ff316f6efb Mon Sep 17 00:00:00 2001 From: Vanya Sergeev Date: Thu, 20 Feb 2014 01:06:04 -0800 Subject: [PATCH] cfg: refactor lpc1xxx targets onto one base config Since now auto-detection for flash size works nicely, there's no reason to keep numerous configs around. Change-Id: If0cbc37985abf17ef7c1f7d0688e76500fac228f Signed-off-by: Vanya Sergeev Reviewed-on: http://openocd.zylin.com/1960 Tested-by: jenkins Reviewed-by: Freddie Chopin Reviewed-by: Spencer Oliver --- tcl/board/mbed-lpc11u24.cfg | 7 +- tcl/target/lpc11uxx.cfg | 50 ------------ tcl/target/lpc11xx.cfg | 8 ++ tcl/target/lpc12xx.cfg | 8 ++ tcl/target/lpc13xx.cfg | 8 ++ tcl/target/lpc1751.cfg | 21 ----- tcl/target/lpc1752.cfg | 21 ----- tcl/target/lpc1754.cfg | 21 ----- tcl/target/lpc1756.cfg | 21 ----- tcl/target/lpc1758.cfg | 21 ----- tcl/target/lpc1759.cfg | 21 ----- tcl/target/lpc1763.cfg | 21 ----- tcl/target/lpc1764.cfg | 21 ----- tcl/target/lpc1765.cfg | 21 ----- tcl/target/lpc1766.cfg | 21 ----- tcl/target/lpc1767.cfg | 21 ----- tcl/target/lpc1768.cfg | 17 ---- tcl/target/lpc1769.cfg | 17 ---- tcl/target/lpc1788.cfg | 17 ---- tcl/target/lpc17xx.cfg | 105 ++----------------------- tcl/target/lpc1xxx.cfg | 153 ++++++++++++++++++++++++++++++++++++ 21 files changed, 185 insertions(+), 436 deletions(-) delete mode 100644 tcl/target/lpc11uxx.cfg create mode 100644 tcl/target/lpc11xx.cfg create mode 100644 tcl/target/lpc12xx.cfg create mode 100644 tcl/target/lpc13xx.cfg delete mode 100644 tcl/target/lpc1751.cfg delete mode 100644 tcl/target/lpc1752.cfg delete mode 100644 tcl/target/lpc1754.cfg delete mode 100644 tcl/target/lpc1756.cfg delete mode 100644 tcl/target/lpc1758.cfg delete mode 100644 tcl/target/lpc1759.cfg delete mode 100644 tcl/target/lpc1763.cfg delete mode 100644 tcl/target/lpc1764.cfg delete mode 100644 tcl/target/lpc1765.cfg delete mode 100644 tcl/target/lpc1766.cfg delete mode 100644 tcl/target/lpc1767.cfg delete mode 100644 tcl/target/lpc1768.cfg delete mode 100644 tcl/target/lpc1769.cfg delete mode 100644 tcl/target/lpc1788.cfg create mode 100644 tcl/target/lpc1xxx.cfg diff --git a/tcl/board/mbed-lpc11u24.cfg b/tcl/board/mbed-lpc11u24.cfg index 6a5826459..b1ec2a519 100644 --- a/tcl/board/mbed-lpc11u24.cfg +++ b/tcl/board/mbed-lpc11u24.cfg @@ -4,10 +4,7 @@ source [find interface/cmsis-dap.cfg] -# increase working area to 8KB +# NXP LPC11U24 Cortex-M0 with 32kB Flash and 8kB SRAM set WORKAREASIZE 0x2000 -# chip name -set CHIPNAME lpc11u24 - -source [find target/lpc11uxx.cfg] +source [find target/lpc11xx.cfg] diff --git a/tcl/target/lpc11uxx.cfg b/tcl/target/lpc11uxx.cfg deleted file mode 100644 index 2a519fbc7..000000000 --- a/tcl/target/lpc11uxx.cfg +++ /dev/null @@ -1,50 +0,0 @@ -# -# NXP lpc11uxx family - -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME lpc11uxx -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 6kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x1800 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x00000000 -} - -# delays on reset lines -adapter_nsrst_delay 100 -#jtag_ntrst_delay 100 - -swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -#set _FLASHNAME $_CHIPNAME.flash -#flash bank $_FLASHNAME lpc2000 0 0 0 0 $_TARGETNAME - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} diff --git a/tcl/target/lpc11xx.cfg b/tcl/target/lpc11xx.cfg new file mode 100644 index 000000000..7a65c1f47 --- /dev/null +++ b/tcl/target/lpc11xx.cfg @@ -0,0 +1,8 @@ +# NXP LPC11xx Cortex-M0 with at least 1kB SRAM +set CHIPNAME lpc11xx +set CHIPSERIES lpc1100 +if { ![info exists WORKAREASIZE] } { + set WORKAREASIZE 0x400 +} + +source [find target/lpc1xxx.cfg] diff --git a/tcl/target/lpc12xx.cfg b/tcl/target/lpc12xx.cfg new file mode 100644 index 000000000..a37c6febc --- /dev/null +++ b/tcl/target/lpc12xx.cfg @@ -0,0 +1,8 @@ +# NXP LPC12xx Cortex-M0 with at least 4kB SRAM +set CHIPNAME lpc12xx +set CHIPSERIES lpc1200 +if { ![info exists WORKAREASIZE] } { + set WORKAREASIZE 0x1000 +} + +source [find target/lpc1xxx.cfg] diff --git a/tcl/target/lpc13xx.cfg b/tcl/target/lpc13xx.cfg new file mode 100644 index 000000000..3d128c963 --- /dev/null +++ b/tcl/target/lpc13xx.cfg @@ -0,0 +1,8 @@ +# NXP LPC13xx Cortex-M3 with at least 4kB SRAM +set CHIPNAME lpc13xx +set CHIPSERIES lpc1300 +if { ![info exists WORKAREASIZE] } { + set WORKAREASIZE 0x1000 +} + +source [find target/lpc1xxx.cfg] diff --git a/tcl/target/lpc1751.cfg b/tcl/target/lpc1751.cfg deleted file mode 100644 index 28edddbb0..000000000 --- a/tcl/target/lpc1751.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1751 Cortex-M3 with 32kB Flash and 8kB Local On-Chip SRAM, -set CHIPNAME lpc1751 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x2000 -set CPUROMSIZE 0x8000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1752.cfg b/tcl/target/lpc1752.cfg deleted file mode 100644 index 3aae38f1b..000000000 --- a/tcl/target/lpc1752.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1752 Cortex-M3 with 64kB Flash and 16kB Local On-Chip SRAM, -set CHIPNAME lpc1752 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x4000 -set CPUROMSIZE 0x10000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1754.cfg b/tcl/target/lpc1754.cfg deleted file mode 100644 index ae2ad50f8..000000000 --- a/tcl/target/lpc1754.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1754 Cortex-M3 with 128kB Flash and 16kB+16kB Local On-Chip SRAM, -set CHIPNAME lpc1754 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x4000 -set CPUROMSIZE 0x20000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1756.cfg b/tcl/target/lpc1756.cfg deleted file mode 100644 index 8110727ff..000000000 --- a/tcl/target/lpc1756.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1756 Cortex-M3 with 256kB Flash and 16kB+16kB Local On-Chip SRAM, -set CHIPNAME lpc1756 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x40000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1758.cfg b/tcl/target/lpc1758.cfg deleted file mode 100644 index 79f662427..000000000 --- a/tcl/target/lpc1758.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1758 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM, -set CHIPNAME lpc1758 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x80000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1759.cfg b/tcl/target/lpc1759.cfg deleted file mode 100644 index 3560e97a7..000000000 --- a/tcl/target/lpc1759.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1759 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM, -set CHIPNAME lpc1759 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x80000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1763.cfg b/tcl/target/lpc1763.cfg deleted file mode 100644 index 08a2be3f7..000000000 --- a/tcl/target/lpc1763.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1763 Cortex-M3 with 256kB Flash and 32kB+32kB Local On-Chip SRAM, -set CHIPNAME lpc1763 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x40000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1764.cfg b/tcl/target/lpc1764.cfg deleted file mode 100644 index df7ab9363..000000000 --- a/tcl/target/lpc1764.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1764 Cortex-M3 with 256kB Flash and 16kB+16kB Local On-Chip SRAM, -set CHIPNAME lpc1764 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x4000 -set CPUROMSIZE 0x20000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1765.cfg b/tcl/target/lpc1765.cfg deleted file mode 100644 index 6d8e8ea5c..000000000 --- a/tcl/target/lpc1765.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1765 Cortex-M3 with 256kB Flash and 32kB+1632kB Local On-Chip SRAM, -set CHIPNAME lpc1765 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x40000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1766.cfg b/tcl/target/lpc1766.cfg deleted file mode 100644 index 8956c0609..000000000 --- a/tcl/target/lpc1766.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1766 Cortex-M3 with 256kB Flash and 16kB+16kB Local On-Chip SRAM, -set CHIPNAME lpc1766 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x40000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1767.cfg b/tcl/target/lpc1767.cfg deleted file mode 100644 index 825dbebc6..000000000 --- a/tcl/target/lpc1767.cfg +++ /dev/null @@ -1,21 +0,0 @@ -# !!!!!!!!!!!! -# ! UNTESTED ! -# !!!!!!!!!!!! - -# NXP LPC1767 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM, -set CHIPNAME lpc1767 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x80000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg deleted file mode 100644 index a436b30f6..000000000 --- a/tcl/target/lpc1768.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# NXP LPC1768 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM, -set CHIPNAME lpc1768 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x80000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1769.cfg b/tcl/target/lpc1769.cfg deleted file mode 100644 index 61ab3ee88..000000000 --- a/tcl/target/lpc1769.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# NXP LPC1769 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM, -set CHIPNAME lpc1769 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x8000 -set CPUROMSIZE 0x80000 - -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 4000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg]; diff --git a/tcl/target/lpc1788.cfg b/tcl/target/lpc1788.cfg deleted file mode 100644 index 112addd72..000000000 --- a/tcl/target/lpc1788.cfg +++ /dev/null @@ -1,17 +0,0 @@ -# NXP LPC1788 Cortex-M3 with 512kB Flash and 64kB Local On-Chip SRAM, -set CHIPNAME lpc1788 -set CPUTAPID 0x4ba00477 -set CPURAMSIZE 0x10000 -set CPUROMSIZE 0x80000 - -# After reset the chip is clocked by the ~12MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -set CCLK 12000 - -#Include the main configuration file. -source [find target/lpc17xx.cfg] diff --git a/tcl/target/lpc17xx.cfg b/tcl/target/lpc17xx.cfg index 062833639..dccf880da 100644 --- a/tcl/target/lpc17xx.cfg +++ b/tcl/target/lpc17xx.cfg @@ -1,101 +1,8 @@ -# Main file for NXP LPC17xx Cortex-M3 -# -# !!!!!! -# -# This file should not be included directly, rather -# by the lpc1751.cfg, lpc1752.cfg, etc. which set the -# needed variables to the appropriate values. -# -# !!!!!! - -# LPC17xx chips support both JTAG and SWD transports. -# Adapt based on what transport is active. -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - error "_CHIPNAME not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)." +# NXP LPC17xx Cortex-M3 with at least 8kB SRAM +set CHIPNAME lpc17xx +set CHIPSERIES lpc1700 +if { ![info exists WORKAREASIZE] } { + set WORKAREASIZE 0x2000 } -# After reset the chip is clocked by the ~4MHz internal RC oscillator. -# When board-specific code (reset-init handler or device firmware) -# configures another oscillator and/or PLL0, set CCLK to match; if -# you don't, then flash erase and write operations may misbehave. -# (The ROM code doing those updates cares about core clock speed...) -# -# CCLK is the core clock frequency in KHz -if { [info exists CCLK] } { - set _CCLK $CCLK -} else { - set _CCLK 4000 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - error "_CPUTAPID not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)." -} - -if { [info exists CPURAMSIZE] } { - set _CPURAMSIZE $CPURAMSIZE -} else { - error "_CPURAMSIZE not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)." -} - -if { [info exists CPUROMSIZE] } { - set _CPUROMSIZE $CPUROMSIZE -} else { - error "_CPUROMSIZE not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)." -} - -#jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID -swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME - -# The LPC17xx devices have 8/16/32kB of SRAM In the ARMv7-M "Code" area (at 0x10000000) -$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_CPURAMSIZE - -# The LPC17xx devies have 32/64/128/256/512kB of flash memory, managed by ROM code -# (including a boot loader which verifies the flash exception table's checksum). -# flash bank lpc2000 0 0 [calc checksum] -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME lpc2000 0x0 $_CPUROMSIZE 0 0 $_TARGETNAME \ - lpc1700 $_CCLK calc_checksum - -# Run with *real slow* clock by default since the -# boot rom could have been playing with the PLL, so -# we have no idea what clock the target is running at. -adapter_khz 10 - -# delays on reset lines -adapter_nsrst_delay 200 -if {[using_jtag]} { - jtag_ntrst_delay 200 -} - -$_TARGETNAME configure -event reset-init { - # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select - # "User Flash Mode" where interrupt vectors are _not_ remapped, - # and reside in flash instead). - # - # See Table 612. Memory Mapping Control register (MEMMAP - 0x400F C040) bit description - # Bit Symbol Value Description Reset - # value - # 0 MAP Memory map control. 0 - # 0 Boot mode. A portion of the Boot ROM is mapped to address 0. - # 1 User mode. The on-chip Flash memory is mapped to address 0. - # 31:1 - Reserved. The value read from a reserved bit is not defined. NA - # - # http://ics.nxp.com/support/documents/microcontrollers/?scope=LPC1768&type=user - - mww 0x400FC040 0x01 -} - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} +source [find target/lpc1xxx.cfg] diff --git a/tcl/target/lpc1xxx.cfg b/tcl/target/lpc1xxx.cfg new file mode 100644 index 000000000..60b505212 --- /dev/null +++ b/tcl/target/lpc1xxx.cfg @@ -0,0 +1,153 @@ +# Main file for NXP LPC1xxx series Cortex-M0/0+/3 parts +# +# !!!!!! +# +# This file should not be included directly, rather by the lpc11xx.cfg, +# lpc13xx.cfg, lpc17xx.cfg, etc. which set the needed variables to the +# appropriate values. +# +# !!!!!! + +# LPC11xx chips support only SWD transport. +# LPC12xx chips support only SWD transport. +# LPC11Uxx chips support both JTAG and SWD transports. +# LPC13xx chips support both JTAG and SWD transports. +# LPC17xx chips support both JTAG and SWD transports. +# Adapt based on what transport is active. +source [find target/swj-dp.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + error "CHIPNAME not set. Please do not include lpc1xxx.cfg directly, but the specific chip configuration file (lpc11xx.cfg, lpc13xx.cfg, lpc17xx.cfg, etc)." +} + +if { [info exists CHIPSERIES] } { + # Validate chip series is supported + if { $CHIPSERIES != "lpc1100" && $CHIPSERIES != "lpc1200" && $CHIPSERIES != "lpc1300" && $CHIPSERIES != "lpc1700" } { + error "Unsupported LPC1xxx chip series specified." + } + set _CHIPSERIES $CHIPSERIES +} else { + error "CHIPSERIES not set. Please do not include lpc1xxx.cfg directly, but the specific chip configuration file (lpc11xx.cfg, lpc13xx.cfg, lpc17xx.cfg, etc)." +} + +# After reset, the chip is clocked by an internal RC oscillator. +# When board-specific code (reset-init handler or device firmware) +# configures another oscillator and/or PLL0, set CCLK to match; if +# you don't, then flash erase and write operations may misbehave. +# (The ROM code doing those updates cares about core clock speed...) +# CCLK is the core clock frequency in KHz +if { [info exists CCLK] } { + # Allow user override + set _CCLK $CCLK +} else { + # LPC11xx/LPC12xx/LPC13xx use a 12MHz one, LPC17xx uses a 4MHz one + if { $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } { + set _CCLK 12000 + } elseif { $_CHIPSERIES == "lpc1700" } { + set _CCLK 4000 + } +} + +if { [info exists CPUTAPID] } { + # Allow user override + set _CPUTAPID $CPUTAPID +} else { + # LPC11xx/LPC12xx uses a Cortex M0 core, LPC13xx/LPC17xx use a Cortex M3 core + if { $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" } { + set _CPUTAPID 0x0bb11477 + } elseif { $_CHIPSERIES == "lpc1300" || $_CHIPSERIES == "lpc1700" } { + if { [using_jtag] } { + set _CPUTAPID 0x4ba00477 + } { + set _CPUTAPID 0x2ba01477 + } + } +} + +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + error "WORKAREASIZE is not set. The $CHIPNAME part is available in several Flash and RAM size configurations. Please set WORKAREASIZE." +} + +swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME + +# The LPC11xx devices have 2/4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) +# The LPC12xx devices have 4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) +# The LPC11Uxx devices have 4/6/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) +# The LPC13xx devices have 4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) +# The LPC17xx devices have 8/16/32kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) +$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE + +# The LPC11xx devies have 8/16/24/32/48/56/64kB of flash memory (at 0x00000000) +# The LPC12xx devies have 32/48/64/80/96/128kB of flash memory (at 0x00000000) +# The LPC11Uxx devies have 16/24/32/40/48/64/96/128kB of flash memory (at 0x00000000) +# The LPC13xx devies have 8/16/32kB of flash memory (at 0x00000000) +# The LPC17xx devies have 32/64/128/256/512kB of flash memory (at 0x00000000) +# +# All are compatible with the "lpc1700" variant of the LPC2000 flash driver +# (same cmd51 destination boundary alignment, and all three support 256 byte +# transfers). +# +# flash bank lpc2000 0 0 [calc checksum] +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME lpc2000 0x0 0 0 0 $_TARGETNAME \ + auto $_CCLK calc_checksum + +if { $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } { + # Do not remap 0x0000-0x0200 to anything but the flash (i.e. select + # "User Flash Mode" where interrupt vectors are _not_ remapped, + # and reside in flash instead). + # + # Table 8. System memory remap register (SYSMEMREMAP, address 0x4004 8000) bit description + # Bit Symbol Value Description + # 1:0 MAP System memory remap + # 0x0 Boot Loader Mode. Interrupt vectors are re-mapped to Boot ROM. + # 0x1 User RAM Mode. Interrupt vectors are re-mapped to Static RAM. + # 0x2 User Flash Mode. Interrupt vectors are not re-mapped and reside in Flash. + # 31:2 - - Reserved. + $_TARGETNAME configure -event reset-init { + mww 0x40048000 0x02 + } +} elseif { $_CHIPSERIES == "lpc1700" } { + # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select + # "User Flash Mode" where interrupt vectors are _not_ remapped, + # and reside in flash instead). + # + # See Table 612. Memory Mapping Control register (MEMMAP - 0x400F C040) bit description + # Bit Symbol Value Description Reset + # value + # 0 MAP Memory map control. 0 + # 0 Boot mode. A portion of the Boot ROM is mapped to address 0. + # 1 User mode. The on-chip Flash memory is mapped to address 0. + # 31:1 - Reserved. The value read from a reserved bit is not defined. NA + # + # http://ics.nxp.com/support/documents/microcontrollers/?scope=LPC1768&type=user + $_TARGETNAME configure -event reset-init { + mww 0x400FC040 0x01 + } +} + +# Run with *real slow* clock by default since the +# boot rom could have been playing with the PLL, so +# we have no idea what clock the target is running at. +adapter_khz 10 + +# delays on reset lines +adapter_nsrst_delay 200 +if {[using_jtag]} { + jtag_ntrst_delay 200 +} + +# LPC11xx/LPC12xx (Cortex M0 core) supports SYSRESETREQ +# LPC13xx/LPC17xx (Cortex M3 core) supports SYSRESETREQ +if {![using_hla]} { + # if srst is not fitted use SYSRESETREQ to + # perform a soft reset + cortex_m reset_config sysresetreq +}