arm11 hardware step using simulation + breakpoint. Use "hardware_step enable" command to revert to hardware stepping. Ideally we could retire the "hardware_step enable" command once we no longer believe it to be necessary.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2643 b42882b7-edfa-0310-969c-e2dbd0fdcd60
__archive__
oharboe 2009-08-27 10:37:01 +00:00
parent c5145ceb19
commit ae17ce23eb
2 changed files with 30 additions and 20 deletions

3
NEWS
View File

@ -12,7 +12,8 @@ Target Layer:
"cortex_m3 vector_catch" ... traps certain hardware faults
without tying up breakpoint resources
If you're willing to help debug it: VERY EARLY Cortex-A8 support
New commands for use with XScale processors: "xscale vector_table"
New commands for use with XScale processors: "xscale vector_table"
ARM11 single stepping support for i.MX31
Flash Layer:
The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips

View File

@ -55,6 +55,7 @@ bool arm11_config_memwrite_error_fatal = true;
uint32_t arm11_vcr = 0;
bool arm11_config_memrw_no_increment = false;
bool arm11_config_step_irq_enable = false;
bool arm11_config_hardware_step = false;
#define ARM11_HANDLER(x) \
.x = arm11_##x
@ -976,7 +977,6 @@ static int arm11_simulate_step(target_t *target, uint32_t *dry_run_pc)
int arm11_step(struct target_s *target, int current, uint32_t address, int handle_breakpoints)
{
FNC_INFO;
int retval;
LOG_DEBUG("target->state: %s",
target_state_name(target));
@ -995,15 +995,6 @@ int arm11_step(struct target_s *target, int current, uint32_t address, int handl
LOG_DEBUG("STEP PC %08" PRIx32 "%s", R(PC), !current ? "!" : "");
/* TODO: to implement single stepping on arm11 devices that can't
* do single stepping in hardware we need to calculate the next
* pc and set up breakpoints accordingingly. */
uint32_t next_pc;
retval = arm11_simulate_step(target, &next_pc);
if (retval != ERROR_OK)
return retval;
/** \todo TODO: Thumb not supported here */
uint32_t next_instruction;
@ -1047,10 +1038,30 @@ int arm11_step(struct target_s *target, int current, uint32_t address, int handl
brp[0].write = 1;
brp[0].address = ARM11_SC7_BVR0;
brp[0].value = R(PC);
brp[1].write = 1;
brp[1].address = ARM11_SC7_BCR0;
brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (2 << 21);
if (arm11_config_hardware_step)
{
/* hardware single stepping be used if possible or is it better to
* always use the same code path? Hardware single stepping is not supported
* on all hardware
*/
brp[0].value = R(PC);
brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (2 << 21);
} else
{
/* sets a breakpoint on the next PC(calculated by simulation),
*/
uint32_t next_pc;
int retval;
retval = arm11_simulate_step(target, &next_pc);
if (retval != ERROR_OK)
return retval;
brp[0].value = next_pc;
brp[1].value = 0x1 | (3 << 1) | (0x0F << 5) | (0 << 14) | (0 << 16) | (0 << 20) | (0 << 21);
}
CHECK_RETVAL(arm11_sc7_run(arm11, brp, asizeof(brp)));
@ -1102,11 +1113,6 @@ int arm11_step(struct target_s *target, int current, uint32_t address, int handl
CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_HALTED));
if (R(PC) != next_pc)
{
LOG_WARNING("next pc != simulated address %08" PRIx32 "!=%08" PRIx32, R(PC), next_pc);
}
return ERROR_OK;
}
@ -1908,6 +1914,7 @@ BOOL_WRAPPER(memwrite_burst, "memory write burst mode")
BOOL_WRAPPER(memwrite_error_fatal, "fatal error mode for memory writes")
BOOL_WRAPPER(memrw_no_increment, "\"no increment\" mode for memory transfers")
BOOL_WRAPPER(step_irq_enable, "IRQs while stepping")
BOOL_WRAPPER(hardware_step, "hardware single step")
int arm11_handle_vcr(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
@ -2070,8 +2077,10 @@ int arm11_register_commands(struct command_context_s *cmd_ctx)
RC_FINAL_BOOL("no_increment", "Don't increment address on multi-read/-write (default: disabled)",
memrw_no_increment)
RC_FINAL_BOOL("step_irq_enable", "Enable interrupts while stepping (default: disabled)",
step_irq_enable)
RC_FINAL_BOOL("step_irq_enable", "Enable interrupts while stepping (default: disabled)",
step_irq_enable)
RC_FINAL_BOOL("hardware_step", "hardware single stepping. By default use simulate + breakpoint. This command is only here to check if simulate + breakpoint implementation is broken.",
hardware_step)
RC_FINAL("vcr", "Control (Interrupt) Vector Catch Register",
arm11_handle_vcr)