icdi: add TI icdi interface

This is the new proprietary interface replacing the older FTDI based adapters.
It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad.

Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/922
Tested-by: jenkins
__archive__
Spencer Oliver 2012-11-12 15:06:37 +00:00
parent c7a6f065d2
commit adb8ec32dc
13 changed files with 858 additions and 13 deletions

2
README
View File

@ -275,6 +275,8 @@ options may be available there:
--enable-stlink Enable building support for the ST-Link JTAG
Programmer
--enable-ti-icdi Enable building support for the TI/Stellaris ICDI
JTAG Programmer
--enable-osbdm Enable building support for the OSBDM (JTAG only)
Programmer

View File

@ -477,7 +477,11 @@ AC_ARG_ENABLE([buspirate],
AC_ARG_ENABLE([stlink],
AS_HELP_STRING([--enable-stlink], [Enable building support for the ST-Link JTAG Programmer]),
[build_hladapter=$enableval], [build_hladapter=no])
[build_hladapter_stlink=$enableval], [build_hladapter_stlink=no])
AC_ARG_ENABLE([ti-icdi],
AS_HELP_STRING([--enable-ti-icdi], [Enable building support for the TI ICDI JTAG Programmer]),
[build_hladapter_icdi=$enableval], [build_hladapter_icdi=no])
AC_ARG_ENABLE([osbdm],
AS_HELP_STRING([--enable-osbdm], [Enable building support for the OSBDM (JTAG only) Programmer]),
@ -790,10 +794,10 @@ else
AC_DEFINE([BUILD_BUSPIRATE], [0], [0 if you don't want the Buspirate JTAG driver.])
fi
if test $build_hladapter = yes; then
AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the ST-Link JTAG driver.])
if test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes; then
AC_DEFINE([BUILD_HLADAPTER], [1], [1 if you want the High Level JTAG driver.])
else
AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you don't want the ST-Link JTAG driver.])
AC_DEFINE([BUILD_HLADAPTER], [0], [0 if you don't want the High Level JTAG driver.])
fi
if test $build_osbdm = yes; then
@ -1142,8 +1146,8 @@ fi
# Check for libusb1 ported drivers.
build_usb_ng=no
if test $build_jlink = yes -o $build_hladapter = yes -o $build_osbdm = yes -o \
$build_opendous = yes -o $build_ftdi = yes
if test $build_jlink = yes -o $build_hladapter_stlink = yes -o $build_osbdm = yes -o \
$build_opendous = yes -o $build_ftdi = yes -o $build_hladapter_icdi = yes
then
build_usb_ng=yes
fi
@ -1192,7 +1196,7 @@ AM_CONDITIONAL([ULINK], [test $build_ulink = yes])
AM_CONDITIONAL([ARMJTAGEW], [test $build_armjtagew = yes])
AM_CONDITIONAL([REMOTE_BITBANG], [test $build_remote_bitbang = yes])
AM_CONDITIONAL([BUSPIRATE], [test $build_buspirate = yes])
AM_CONDITIONAL([HLADAPTER], [test $build_hladapter = yes])
AM_CONDITIONAL([HLADAPTER], [test $build_hladapter_stlink = yes -o $build_hladapter_icdi = yes])
AM_CONDITIONAL([OSBDM], [test $build_osbdm = yes])
AM_CONDITIONAL([OPENDOUS], [test $build_opendous = yes])
AM_CONDITIONAL([SYSFSGPIO], [test $build_sysfsgpio = yes])

View File

@ -49,12 +49,15 @@ ATTRS{idVendor}=="0640", ATTRS{idProduct}=="002c", MODE="664", GROUP="plugdev"
# Hitex STM32-PerformanceStick
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="002d", MODE="664", GROUP="plugdev"
# TI/Luminary Stellaris Evaluation Board (several)
# TI/Luminary Stellaris Evaluation Board FTDI (several)
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd9", MODE="664", GROUP="plugdev"
# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
# TI/Luminary Stellaris In-Circuit Debug Interface FTDI (ICDI) Board
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcda", MODE="664", GROUP="plugdev"
# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="664", GROUP="plugdev"
# Xverve Signalyzer Tool (DT-USB-ST)
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca0", MODE="664", GROUP="plugdev"

View File

@ -370,3 +370,30 @@ void bit_copy_discard(struct bit_copy_queue *q)
free(qe);
}
}
int unhexify(char *bin, const char *hex, int count)
{
int i, tmp;
for (i = 0; i < count; i++) {
if (sscanf(hex + (2 * i), "%02x", &tmp) != 1)
return i;
bin[i] = tmp;
}
return i;
}
int hexify(char *hex, const char *bin, int count, int out_maxlen)
{
int i, cmd_len = 0;
/* May use a length, or a null-terminated string as input. */
if (count == 0)
count = strlen(bin);
for (i = 0; i < count; i++)
cmd_len += snprintf(hex + cmd_len, out_maxlen - cmd_len, "%02x", bin[i]);
return cmd_len;
}

View File

@ -156,4 +156,9 @@ int bit_copy_queued(struct bit_copy_queue *q, uint8_t *dst, unsigned dst_offset,
void bit_copy_execute(struct bit_copy_queue *q);
void bit_copy_discard(struct bit_copy_queue *q);
/* functions to convert to/from hex encoded buffer
* used in ti-icdi driver and gdb server */
int unhexify(char *bin, const char *hex, int count);
int hexify(char *hex, const char *bin, int count, int out_maxlen);
#endif /* BINARYBUFFER_H */

View File

@ -100,6 +100,7 @@ DRIVERFILES += remote_bitbang.c
endif
if HLADAPTER
DRIVERFILES += stlink_usb.c
DRIVERFILES += ti_icdi_usb.c
endif
if OSBDM
DRIVERFILES += osbdm.c

View File

@ -0,0 +1,730 @@
/***************************************************************************
* *
* Copyright (C) 2012 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/* project specific includes */
#include <helper/binarybuffer.h>
#include <jtag/interface.h>
#include <jtag/hla/hla_layout.h>
#include <jtag/hla/hla_transport.h>
#include <jtag/hla/hla_interface.h>
#include <target/target.h>
#include <target/cortex_m.h>
#include <libusb-1.0/libusb.h>
#define ICDI_WRITE_ENDPOINT 0x02
#define ICDI_READ_ENDPOINT 0x83
#define ICDI_WRITE_TIMEOUT 1000
#define ICDI_READ_TIMEOUT 1000
#define ICDI_PACKET_SIZE 2048
#define PACKET_START "$"
#define PACKET_END "#"
struct icdi_usb_handle_s {
libusb_context *usb_ctx;
libusb_device_handle *usb_dev;
char *read_buffer;
char *write_buffer;
int max_packet;
int read_count;
};
static int icdi_usb_read_mem32(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer);
static int icdi_usb_write_mem32(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer);
static int remote_escape_output(const char *buffer, int len, char *out_buf, int *out_len, int out_maxlen)
{
int input_index, output_index;
output_index = 0;
for (input_index = 0; input_index < len; input_index++) {
char b = buffer[input_index];
if (b == '$' || b == '#' || b == '}' || b == '*') {
/* These must be escaped. */
if (output_index + 2 > out_maxlen)
break;
out_buf[output_index++] = '}';
out_buf[output_index++] = b ^ 0x20;
} else {
if (output_index + 1 > out_maxlen)
break;
out_buf[output_index++] = b;
}
}
*out_len = input_index;
return output_index;
}
static int remote_unescape_input(const char *buffer, int len, char *out_buf, int out_maxlen)
{
int input_index, output_index;
int escaped;
output_index = 0;
escaped = 0;
for (input_index = 0; input_index < len; input_index++) {
char b = buffer[input_index];
if (output_index + 1 > out_maxlen)
LOG_ERROR("Received too much data from the target.");
if (escaped) {
out_buf[output_index++] = b ^ 0x20;
escaped = 0;
} else if (b == '}')
escaped = 1;
else
out_buf[output_index++] = b;
}
if (escaped)
LOG_ERROR("Unmatched escape character in target response.");
return output_index;
}
static int icdi_send_packet(void *handle, int len)
{
unsigned char cksum = 0;
struct icdi_usb_handle_s *h;
int result, retry = 0;
int transferred = 0;
assert(handle != NULL);
h = (struct icdi_usb_handle_s *)handle;
/* check we have a large enough buffer for checksum "#00" */
if (len + 3 > h->max_packet) {
LOG_ERROR("packet buffer too small");
return ERROR_FAIL;
}
/* calculate checksum - offset start of packet */
for (int i = 1; i < len; i++)
cksum += h->write_buffer[i];
len += sprintf(&h->write_buffer[len], PACKET_END "%02x", cksum);
#ifdef _DEBUG_USB_COMMS_
char buffer[50];
char ch = h->write_buffer[1];
if (ch == 'x' || ch == 'X')
LOG_DEBUG("writing packet: <binary>");
else {
memcpy(buffer, h->write_buffer, len >= 50 ? 50-1 : len);
buffer[len] = 0;
LOG_DEBUG("writing packet: %s", buffer);
}
#endif
while (1) {
result = libusb_bulk_transfer(h->usb_dev, ICDI_WRITE_ENDPOINT, (unsigned char *)h->write_buffer, len,
&transferred, ICDI_WRITE_TIMEOUT);
if (result != 0 || transferred != len) {
LOG_DEBUG("Error TX Data %d", result);
return ERROR_FAIL;
}
/* check that the client got the message ok, or shall we resend */
result = libusb_bulk_transfer(h->usb_dev, ICDI_READ_ENDPOINT, (unsigned char *)h->read_buffer, h->max_packet,
&transferred, ICDI_READ_TIMEOUT);
if (result != 0 || transferred < 1) {
LOG_DEBUG("Error RX Data %d", result);
return ERROR_FAIL;
}
#ifdef _DEBUG_USB_COMMS_
LOG_DEBUG("received reply: '%c' : count %d", h->read_buffer[0], transferred);
#endif
if (h->read_buffer[0] == '-') {
LOG_DEBUG("Resending packet %d", ++retry);
} else {
if (h->read_buffer[0] != '+')
LOG_DEBUG("Unexpected Reply from ICDI: %c", h->read_buffer[0]);
break;
}
if (retry == 3) {
LOG_DEBUG("maximum nack retries attempted");
return ERROR_FAIL;
}
}
retry = 0;
h->read_count = transferred;
while (1) {
/* read reply from icdi */
result = libusb_bulk_transfer(h->usb_dev, ICDI_READ_ENDPOINT, (unsigned char *)h->read_buffer + h->read_count,
h->max_packet - h->read_count, &transferred, ICDI_READ_TIMEOUT);
#ifdef _DEBUG_USB_COMMS_
LOG_DEBUG("received data: count %d", transferred);
#endif
/* check for errors but retry for timeout */
if (result != 0) {
if (result == LIBUSB_ERROR_TIMEOUT) {
LOG_DEBUG("Error RX timeout %d", result);
} else {
LOG_DEBUG("Error RX Data %d", result);
return ERROR_FAIL;
}
}
h->read_count += transferred;
/* we need to make sure we have a full packet, including checksum */
if (h->read_count > 5) {
/* check that we have received an packet delimiter
* we do not validate the checksum
* reply should contain $...#AA - so we check for # */
if (h->read_buffer[h->read_count - 3] == '#')
return ERROR_OK;
}
if (retry++ == 3) {
LOG_DEBUG("maximum data retries attempted");
break;
}
}
return ERROR_FAIL;
}
static int icdi_send_cmd(void *handle, const char *cmd)
{
struct icdi_usb_handle_s *h;
h = (struct icdi_usb_handle_s *)handle;
int cmd_len = snprintf(h->write_buffer, h->max_packet, PACKET_START "%s", cmd);
return icdi_send_packet(handle, cmd_len);
}
static int icdi_send_remote_cmd(void *handle, const char *data)
{
struct icdi_usb_handle_s *h;
h = (struct icdi_usb_handle_s *)handle;
size_t cmd_len = sprintf(h->write_buffer, PACKET_START "qRcmd,");
cmd_len += hexify(h->write_buffer + cmd_len, data, 0, h->max_packet - cmd_len);
return icdi_send_packet(handle, cmd_len);
}
static int icdi_get_cmd_result(void *handle)
{
struct icdi_usb_handle_s *h;
int offset = 0;
char ch;
assert(handle != NULL);
h = (struct icdi_usb_handle_s *)handle;
do {
ch = h->read_buffer[offset++];
if (offset > h->read_count)
return ERROR_FAIL;
} while (ch != '$');
if (memcmp("OK", h->read_buffer + offset, 2) == 0)
return ERROR_OK;
if (h->read_buffer[offset] == 'E') {
/* get error code */
char result;
if (unhexify(&result, h->read_buffer + offset + 1, 1) != 1)
return ERROR_FAIL;
return result;
}
/* for now we assume everything else is ok */
return ERROR_OK;
}
static int icdi_usb_idcode(void *handle, uint32_t *idcode)
{
return ERROR_OK;
}
static int icdi_usb_write_debug_reg(void *handle, uint32_t addr, uint32_t val)
{
return icdi_usb_write_mem32(handle, addr, 1, (uint8_t *)&val);
}
static enum target_state icdi_usb_state(void *handle)
{
int result;
struct icdi_usb_handle_s *h;
uint32_t dhcsr;
h = (struct icdi_usb_handle_s *)handle;
result = icdi_usb_read_mem32(h, DCB_DHCSR, 1, (uint8_t *)&dhcsr);
if (result != ERROR_OK)
return TARGET_UNKNOWN;
if (dhcsr & S_HALT)
return TARGET_HALTED;
return TARGET_RUNNING;
}
static int icdi_usb_version(void *handle)
{
struct icdi_usb_handle_s *h;
h = (struct icdi_usb_handle_s *)handle;
char version[20];
/* get info about icdi */
int result = icdi_send_remote_cmd(handle, "version");
if (result != ERROR_OK)
return result;
if (h->read_count < 8) {
LOG_ERROR("Invalid Reply Received");
return ERROR_FAIL;
}
/* convert reply */
if (unhexify(version, h->read_buffer + 2, 4) != 4) {
LOG_WARNING("unable to get ICDI version");
return ERROR_OK;
}
/* null terminate and print info */
version[4] = 0;
LOG_INFO("ICDI Firmware version: %s", version);
return ERROR_OK;
}
static int icdi_usb_query(void *handle)
{
int result;
struct icdi_usb_handle_s *h;
h = (struct icdi_usb_handle_s *)handle;
result = icdi_send_cmd(handle, "qSupported");
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("query supported failed: 0x%x", result);
return ERROR_FAIL;
}
/* from this we can get the max packet supported */
/* query packet buffer size */
char *offset = strstr(h->read_buffer, "PacketSize");
if (offset) {
char *separator;
int max_packet;
max_packet = strtoul(offset + 11, &separator, 16);
if (!max_packet)
LOG_ERROR("invalid max packet, using defaults");
else
h->max_packet = max_packet;
LOG_DEBUG("max packet supported : %" PRIu32 " bytes", h->max_packet);
}
/* if required re allocate packet buffer */
if (h->max_packet != ICDI_PACKET_SIZE) {
h->read_buffer = realloc(h->read_buffer, h->max_packet);
h->write_buffer = realloc(h->write_buffer, h->max_packet);
if (h->read_buffer == 0 || h->write_buffer == 0) {
LOG_ERROR("unable to reallocate memory");
return ERROR_FAIL;
}
}
/* set extended mode */
result = icdi_send_cmd(handle, "!");
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("unable to enable extended mode: 0x%x", result);
return ERROR_FAIL;
}
return ERROR_OK;
}
static int icdi_usb_reset(void *handle)
{
/* we do this in hla_target.c */
return ERROR_OK;
}
static int icdi_usb_assert_srst(void *handle, int srst)
{
/* TODO not supported yet */
return ERROR_COMMAND_NOTFOUND;
}
static int icdi_usb_run(void *handle)
{
int result;
/* resume target at current address */
result = icdi_send_cmd(handle, "c");
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("continue failed: 0x%x", result);
return ERROR_FAIL;
}
return result;
}
static int icdi_usb_halt(void *handle)
{
int result;
/* this query halts the target ?? */
result = icdi_send_cmd(handle, "?");
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("halt failed: 0x%x", result);
return ERROR_FAIL;
}
return result;
}
static int icdi_usb_step(void *handle)
{
int result;
/* step target at current address */
result = icdi_send_cmd(handle, "s");
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("step failed: 0x%x", result);
return ERROR_FAIL;
}
return result;
}
static int icdi_usb_read_regs(void *handle)
{
/* currently unsupported */
return ERROR_OK;
}
static int icdi_usb_read_reg(void *handle, int num, uint32_t *val)
{
int result;
struct icdi_usb_handle_s *h;
char cmd[10];
h = (struct icdi_usb_handle_s *)handle;
snprintf(cmd, sizeof(cmd), "p%x", num);
result = icdi_send_cmd(handle, cmd);
if (result != ERROR_OK)
return result;
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("register read failed: 0x%x", result);
return ERROR_FAIL;
}
/* convert result */
if (unhexify((char *)val, h->read_buffer + 2, 4) != 4) {
LOG_ERROR("failed to convert result");
return ERROR_FAIL;
}
return result;
}
static int icdi_usb_write_reg(void *handle, int num, uint32_t val)
{
int result;
char cmd[20];
int cmd_len = snprintf(cmd, sizeof(cmd), "P%x=", num);
hexify(cmd + cmd_len, (char *)&val, 4, sizeof(cmd));
result = icdi_send_cmd(handle, cmd);
if (result != ERROR_OK)
return result;
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("register write failed: 0x%x", result);
return ERROR_FAIL;
}
return result;
}
static int icdi_usb_read_mem(void *handle, uint32_t addr, uint32_t len, uint8_t *buffer)
{
int result;
struct icdi_usb_handle_s *h;
char cmd[20];
h = (struct icdi_usb_handle_s *)handle;
snprintf(cmd, sizeof(cmd), "x%x,%x", addr, len);
result = icdi_send_cmd(handle, cmd);
if (result != ERROR_OK)
return result;
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("memory read failed: 0x%x", result);
return ERROR_FAIL;
}
/* unescape input */
int read_len = remote_unescape_input(h->read_buffer + 5, h->read_count - 8, (char *)buffer, len);
if (read_len != (int)len) {
LOG_ERROR("read more bytes than expected: actual 0x%" PRIx32 " expected 0x%" PRIx32, read_len, len);
return ERROR_FAIL;
}
return ERROR_OK;
}
static int icdi_usb_write_mem(void *handle, uint32_t addr, uint32_t len, const uint8_t *buffer)
{
int result;
struct icdi_usb_handle_s *h;
h = (struct icdi_usb_handle_s *)handle;
size_t cmd_len = snprintf(h->write_buffer, h->max_packet, PACKET_START "X%x,%x:", addr, len);
int out_len;
cmd_len += remote_escape_output((char *)buffer, len, h->write_buffer + cmd_len,
&out_len, h->max_packet - cmd_len);
if (out_len < (int)len) {
/* for now issue a error as we have no way of allocating a larger buffer */
LOG_ERROR("memory buffer too small: requires 0x%" PRIx32 " actual 0x%" PRIx32, out_len, len);
return ERROR_FAIL;
}
result = icdi_send_packet(handle, cmd_len);
if (result != ERROR_OK)
return result;
/* check result */
result = icdi_get_cmd_result(handle);
if (result != ERROR_OK) {
LOG_ERROR("memory write failed: 0x%x", result);
return ERROR_FAIL;
}
return ERROR_OK;
}
static int icdi_usb_read_mem8(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer)
{
return icdi_usb_read_mem(handle, addr, len, buffer);
}
static int icdi_usb_write_mem8(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer)
{
return icdi_usb_write_mem(handle, addr, len, buffer);
}
static int icdi_usb_read_mem32(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer)
{
return icdi_usb_read_mem(handle, addr, len * 4, buffer);
}
static int icdi_usb_write_mem32(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer)
{
return icdi_usb_write_mem(handle, addr, len * 4, buffer);
}
static int icdi_usb_close(void *handle)
{
struct icdi_usb_handle_s *h;
h = (struct icdi_usb_handle_s *)handle;
if (h->usb_dev)
libusb_close(h->usb_dev);
if (h->usb_ctx)
libusb_exit(h->usb_ctx);
if (h->read_buffer)
free(h->read_buffer);
if (h->write_buffer)
free(h->write_buffer);
free(handle);
return ERROR_OK;
}
static int icdi_usb_open(struct hl_interface_param_s *param, void **fd)
{
int retval;
struct icdi_usb_handle_s *h;
LOG_DEBUG("icdi_usb_open");
h = calloc(1, sizeof(struct icdi_usb_handle_s));
if (h == 0) {
LOG_ERROR("unable to allocate memory");
return ERROR_FAIL;
}
LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x", param->transport,
param->vid, param->pid);
if (libusb_init(&h->usb_ctx) != 0) {
LOG_ERROR("libusb init failed");
goto error_open;
}
h->usb_dev = libusb_open_device_with_vid_pid(h->usb_ctx, param->vid, param->pid);
if (!h->usb_dev) {
LOG_ERROR("open failed");
goto error_open;
}
if (libusb_claim_interface(h->usb_dev, 2)) {
LOG_DEBUG("claim interface failed");
goto error_open;
}
/* check if mode is supported */
retval = ERROR_OK;
switch (param->transport) {
#if 0
/* TODO place holder as swd is not currently supported */
case HL_TRANSPORT_SWD:
#endif
case HL_TRANSPORT_JTAG:
break;
default:
retval = ERROR_FAIL;
break;
}
if (retval != ERROR_OK) {
LOG_ERROR("mode (transport) not supported by device");
goto error_open;
}
/* allocate buffer */
h->read_buffer = malloc(ICDI_PACKET_SIZE);
h->write_buffer = malloc(ICDI_PACKET_SIZE);
h->max_packet = ICDI_PACKET_SIZE;
if (h->read_buffer == 0 || h->write_buffer == 0) {
LOG_DEBUG("malloc failed");
goto error_open;
}
/* query icdi version etc */
retval = icdi_usb_version(h);
if (retval != ERROR_OK)
goto error_open;
/* query icdi support */
retval = icdi_usb_query(h);
if (retval != ERROR_OK)
goto error_open;
*fd = h;
/* set the max target read/write buffer in bytes
* as we are using gdb binary packets to transfer memory we have to
* reserve half the buffer for any possible escape chars plus
* at least 64 bytes for the gdb packet header */
param->max_buffer = (((h->max_packet - 64) / 4) * 4) / 2;
return ERROR_OK;
error_open:
icdi_usb_close(h);
return ERROR_FAIL;
}
struct hl_layout_api_s icdi_usb_layout_api = {
.open = icdi_usb_open,
.close = icdi_usb_close,
.idcode = icdi_usb_idcode,
.state = icdi_usb_state,
.reset = icdi_usb_reset,
.assert_srst = icdi_usb_assert_srst,
.run = icdi_usb_run,
.halt = icdi_usb_halt,
.step = icdi_usb_step,
.read_regs = icdi_usb_read_regs,
.read_reg = icdi_usb_read_reg,
.write_reg = icdi_usb_write_reg,
.read_mem8 = icdi_usb_read_mem8,
.write_mem8 = icdi_usb_write_mem8,
.read_mem32 = icdi_usb_read_mem32,
.write_mem32 = icdi_usb_write_mem32,
.write_debug_reg = icdi_usb_write_debug_reg
};

View File

@ -71,6 +71,12 @@ static const struct hl_layout hl_layouts[] = {
.close = hl_layout_close,
.api = &stlink_usb_layout_api,
},
{
.name = "ti-icdi",
.open = hl_layout_open,
.close = hl_layout_close,
.api = &icdi_usb_layout_api,
},
{.name = NULL, /* END OF TABLE */ },
};

View File

@ -30,6 +30,7 @@ struct hl_interface_param_s;
/** */
extern struct hl_layout_api_s stlink_usb_layout_api;
extern struct hl_layout_api_s icdi_usb_layout_api;
/** */
struct hl_layout_api_s {

View File

@ -0,0 +1,15 @@
#
# TI Stellaris Launchpad ek-lm4f120xl Evaluation Kits
#
# http://www.ti.com/tool/ek-lm4f120xl
#
#
# NOTE: using the bundled ICDI interface is optional!
# This interface is not ftdi based as previous boards were
#
source [find interface/ti-icdi.cfg]
set WORKAREASIZE 0x8000
set CHIPNAME lm4f120h5qr
source [find target/stellaris_icdi.cfg]

View File

@ -4,10 +4,12 @@
# http://www.ti.com/tool/ek-lm4f232
#
# NOTE: using the bundled FT2232 JTAG/SWD/SWO interface is optional!
# so is using in JTAG mode, as done here.
source [find interface/luminary-icdi.cfg]
#
# NOTE: using the bundled ICDI interface is optional!
# This interface is not ftdi based as previous boards were
#
source [find interface/ti-icdi.cfg]
set WORKAREASIZE 0x8000
set CHIPNAME lm4f23x
source [find target/stellaris.cfg]
source [find target/stellaris_icdi.cfg]

15
tcl/interface/ti-icdi.cfg Normal file
View File

@ -0,0 +1,15 @@
#
# TI Stellaris In-Circuit Debug Interface (ICDI) Board
#
# This is the propriety ICDI interface used on newer boards such as
# LM4F232 Evaluation Kit - http://www.ti.com/tool/ek-lm4f232
# Stellaris Launchpad - http://www.ti.com/stellaris-launchpad
# http://www.ti.com/tool/ek-lm4f232
#
interface hla
hla_layout ti-icdi
hla_vid_pid 0x1cbe 0x00fd
# unused but set to disable warnings
adapter_khz 1000

View File

@ -0,0 +1,34 @@
#
# lm3s icdi pseudo target
#
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME lm3s
}
# Work-area is a space in RAM used for flash programming
# By default use 16kB
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x4000
}
#
# possible value are hla_jtag
# currently swd is not supported
#
transport select hla_jtag
# do not check id as icdi currently does not support it
hla newtap $_CHIPNAME cpu -expected-id 0
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
# flash configuration ... autodetects sizes, autoprobed
flash bank $_CHIPNAME.flash stellaris 0 0 0 0 $_TARGETNAME