jtag/drivers/ftdi: add option to declare signal aliases

This adds -alias|-nalias options to ftdi_layout_signal command that
allow to declare a new signal based on an already defined one.

Change-Id: I552578ebcd12ae21957a1c0d3b7e878adeff6df0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2181
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
__archive__
Paul Fertser 2014-06-20 12:47:24 +04:00 committed by Andreas Fritiofson
parent 335bafbb25
commit a87e699edf
2 changed files with 19 additions and 2 deletions

View File

@ -2767,7 +2767,7 @@ minimal impact on the target system. Avoid floating inputs, conflicting outputs
and initially asserted reset signals.
@end deffn
@deffn {Config Command} {ftdi_layout_signal} name [@option{-data}|@option{-ndata} data_mask] [@option{-oe}|@option{-noe} oe_mask]
@deffn {Config Command} {ftdi_layout_signal} name [@option{-data}|@option{-ndata} data_mask] [@option{-oe}|@option{-noe} oe_mask] [@option{-alias}|@option{-nalias} name]
Creates a signal with the specified @var{name}, controlled by one or more FTDI
GPIO pins via a range of possible buffer connections. The masks are FTDI GPIO
register bitmasks to tell the driver the connection and type of the output
@ -2790,6 +2790,10 @@ target without any buffer. The FTDI pin is then switched between output and
input as necessary to provide the full set of low, high and Hi-Z
characteristics. In all other cases, the pins specified in a signal definition
are always driven by the FTDI.
If @option{-alias} or @option{-nalias} is used, the signal is created
identical (or with data inverted) to an already specified signal
@var{name}.
@end deffn
@deffn {Command} {ftdi_set_signal} name @option{0}|@option{1}|@option{z}

View File

@ -740,6 +740,19 @@ COMMAND_HANDLER(ftdi_handle_layout_signal_command)
} else if (strcmp("-noe", CMD_ARGV[i]) == 0) {
invert_oe = true;
COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], oe_mask);
} else if (!strcmp("-alias", CMD_ARGV[i]) ||
!strcmp("-nalias", CMD_ARGV[i])) {
if (!strcmp("-nalias", CMD_ARGV[i]))
invert_data = true;
struct signal *sig = find_signal_by_name(CMD_ARGV[i + 1]);
if (!sig) {
LOG_ERROR("signal %s is not defined", CMD_ARGV[i + 1]);
return ERROR_FAIL;
}
data_mask = sig->data_mask;
oe_mask = sig->oe_mask;
invert_oe = sig->invert_oe;
invert_data ^= sig->invert_data;
} else {
LOG_ERROR("unknown option '%s'", CMD_ARGV[i]);
return ERROR_COMMAND_SYNTAX_ERROR;
@ -869,7 +882,7 @@ static const struct command_registration ftdi_command_handlers[] = {
.mode = COMMAND_ANY,
.help = "define a signal controlled by one or more FTDI GPIO as data "
"and/or output enable",
.usage = "name [-data mask|-ndata mask] [-oe mask|-noe mask]",
.usage = "name [-data mask|-ndata mask] [-oe mask|-noe mask] [-alias|-nalias name]",
},
{
.name = "ftdi_set_signal",