Dirk Behme <dirk.behme@googlemail.com> Fix some typos in documentation

git-svn-id: svn://svn.berlios.de/openocd/trunk@1249 b42882b7-edfa-0310-969c-e2dbd0fdcd60
__archive__
oharboe 2008-12-16 19:29:50 +00:00
parent f34248eb05
commit a39f2a58f8
1 changed files with 18 additions and 18 deletions

View File

@ -544,7 +544,7 @@ Some key things you should look at and understand are:
@enumerate
@item The RESET configuration of your debug environment as a hole
@item Is there a ``work area'' that that OpenOCD can use?
@item Is there a ``work area'' that OpenOCD can use?
@* For ARM - work areas mean up to 10x faster downloads.
@item For MMU/MPU based ARM chips (ie: ARM9 and later) will that work area still be available?
@item For complex targets (multiple chips) the JTAG SPEED becomes an issue.
@ -920,7 +920,7 @@ can type a Tcl for() loop, set variables, etc.
@node Daemon Configuration
@chapter Daemon Configuration
The commands here are commonly found inthe openocd.cfg file and are
The commands here are commonly found in the openocd.cfg file and are
used to specify what TCP/IP ports are used, and how GDB should be
supported.
@section init
@ -1492,9 +1492,9 @@ have the taps created in the proper order.
by the ``jtag newtap'' command. The documentation remains here so that
one can easily convert the old syntax to the new syntax. About the old
syntax: The old syntax is positional, ie: The 4th parameter is the
``irmask'' The new syntax requires named prefixes, and supports
additional options, for example ``-irmask 4'' Please refer to the
@b{jtag newtap} command for deails.
``irmask''. The new syntax requires named prefixes, and supports
additional options, for example ``-irmask 4''. Please refer to the
@b{jtag newtap} command for details.
@example
OLD: jtag_device 8 0x01 0x0e3 0xfe
NEW: jtag newtap CHIPNAME TAPNAME -irlen 8 -ircapture 0xe3 -irmask 0xfe
@ -1543,7 +1543,7 @@ The IEEE JTAG definition has no concept of a ``disabled'' tap.
@b{jtag tapisenabled DOTTED.NAME}
This command return 1 if the named tap is currently enabled, 0 if not.
This command returns 1 if the named tap is currently enabled, 0 if not.
This command exists so that scripts that manipulate a JRC (like the
Omap3530 has) can determine if OpenOCD thinks a tap is presently
enabled, or disabled.
@ -1558,7 +1558,7 @@ creating a ``target'' a JTAG Tap DOTTED.NAME must exist first.
@section targets [NAME]
@b{Note:} This command name is PLURAL - not singular.
With NO parameter, this pural @b{targets} command lists all known
With NO parameter, this plural @b{targets} command lists all known
targets in a human friendly form.
With a parameter, this pural @b{targets} command sets the current
@ -1690,13 +1690,13 @@ with odd reset situations and are not documented here.
@end itemize
@section Target Events
At various times, certian things happen, or you want to happen.
At various times, certain things can happen, or you want them to happen.
Examples:
@itemize @bullet
@item What should happen when GDB connects? Should your target reset?
@item When GDB tries to flash the target, do you need to enable the flash via a special command?
@item During reset, do you need to write to certian memory locations to reconfigure the SDRAM?
@item During reset, do you need to write to certain memory location to reconfigure the SDRAM?
@end itemize
All of the above items are handled by target events.
@ -1708,7 +1708,7 @@ Syntactially, the option is: ``-event NAME BODY'' where NAME is a
target event name, and BODY is a tcl procedure or string of commands
to execute.
The programers model is the: ``-command'' option used in Tcl/Tk
The programmers model is the ``-command'' option used in Tcl/Tk
buttons and events. Below are two identical examples, the first
creates and invokes small procedure. The second inlines the procedure.
@ -1822,13 +1822,13 @@ command.
@comment end TYPES
@end itemize
@item @b{PARAMS}
@*PARAMs are various target configure parameters, the following are manditory
at configuration.
@comment START manditory
@*PARAMs are various target configure parameters, the following are mandatory
at configuration:
@comment START mandatory
@itemize @bullet
@item @b{-endian big|little}
@item @b{-chain-position DOTTED.NAME}
@comment end MANDITORY
@comment end MANDATORY
@end itemize
@comment END params
@end itemize
@ -3269,7 +3269,7 @@ OpenOCD.
@section TCL Rule #1
There is a famous joke, it goes like this:
@enumerate
@item Rule #1: The wife is aways correct
@item Rule #1: The wife is always correct
@item Rule #2: If you think otherwise, See Rule #1
@end enumerate
@ -3280,7 +3280,7 @@ The TCL equal is this:
@item Rule #2: If you think otherwise, See Rule #1
@end enumerate
As in the famous joke, the consiquences of Rule #1 are profound. Once
As in the famous joke, the consequences of Rule #1 are profound. Once
you understand Rule #1, you will understand TCL.
@section TCL Rule #1b
@ -3350,9 +3350,9 @@ nested 3 times@}@}@} NOTE: [date] is perhaps a bad example, as of
28/nov/2008, Jim/OpenOCD does not have a date command.
@end itemize
@section Consiquences of Rule 1/2/3/4
@section Consequences of Rule 1/2/3/4
The consiquences of Rule 1 is profound.
The consequences of Rule 1 is profound.
@subsection Tokenizing & Execution.