TI TMS570 USB Kit board config

Split TMS570 target into LS31/LS21 and LS20/LS10 targets.
Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI.
Tested attaching.

Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620
Signed-off-by: Alex Ray <a@machinaut.com>
Reviewed-on: http://openocd.zylin.com/2089
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
__archive__
Alex Ray 2014-04-03 23:14:37 -07:00 committed by Paul Fertser
parent 528197ba2c
commit a1719e0048
4 changed files with 24 additions and 8 deletions

View File

@ -1,9 +1,16 @@
adapter_khz 1500
# TMS570 Microcontroller USB Kit
# http://www.ti.com/tool/TMDX570LS20SUSB
# Board uses a FT2232H to emulate an XDS100v2 JTAG debugger
# TODO: board also supports an SCI UART on the 2232's B Bus
source [find interface/ftdi/xds100v2.cfg]
set DAP_TAPID 0x0b7b302f
set JRC_TAPID $DAP_TAPID
source [find target/ti_tms570.cfg]
# Processor is TMS570LS20216
source [find target/ti_tms570ls20xxx.cfg]
reset_config trst_only
# xds100v2 config says add this to the end
init
ftdi_set_signal PWR_RST 1
jtag arp_init

View File

@ -16,19 +16,17 @@ if { [info exists ENDIAN] } {
source [find target/icepick.cfg]
# Main DAP
# DAP_TAPID should be set before source-ing this file
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
set _DAP_TAPID 0x0B8A002F
}
jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable
jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0"
# ICEpick-C (JTAG route controller)
# JRC_TAPID should be set before source-ing this file
if { [info exists JRC_TAPID] } {
set _JRC_TAPID $JRC_TAPID
} else {
set _JRC_TAPID 0x0B8A002F
}
jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
-expected-id $_JRC_TAPID -ignore-version

View File

@ -0,0 +1,6 @@
# TMS570LS20216, TMS570LS20206, TMS570LS10216
# TMS570LS10206, TMS570LS10116, TMS570LS10106
set DAP_TAPID 0x0B7B302F
set JRC_TAPID 0x0B7B302F
source [find target/ti_tms570.cfg]

View File

@ -0,0 +1,5 @@
# TMS570LS3137
set DAP_TAPID 0x0B8A002F
set JRC_TAPID 0x0B8A002F
source [find target/ti_tms570.cfg]