wi-9c target scripts

git-svn-id: svn://svn.berlios.de/openocd/trunk@464 b42882b7-edfa-0310-969c-e2dbd0fdcd60
__archive__
oharboe 2008-03-07 10:54:43 +00:00
parent c317ffe243
commit 96261e8277
2 changed files with 92 additions and 0 deletions

View File

@ -0,0 +1,56 @@
mww 0x90600104 0x33313333
mww 0xA0700000 0x00000001 # Enable the memory controller.
mww 0xA0700024 0x00000006 # Set the refresh counter 6
mww 0xA0700028 0x00000001 #
mww 0xA0700030 0x00000001 # Set the precharge period
mww 0xA0700034 0x00000004 # Active to precharge command period is 16 clock cycles
mww 0xA070003C 0x00000001 # tAPR
mww 0xA0700040 0x00000005 # tDAL
mww 0xA0700044 0x00000001 # tWR
mww 0xA0700048 0x00000006 # tRC 32 clock cycles
mww 0xA070004C 0x00000006 # tRFC 32 clock cycles
mww 0xA0700054 0x00000001 # tRRD
mww 0xA0700058 0x00000001 # tMRD
mww 0xA0700100 0x00004280 # Dynamic Config 0 (cs4)
mww 0xA0700120 0x00004280 # Dynamic Config 1 (cs5)
mww 0xA0700140 0x00004280 # Dynamic Config 2 (cs6)
mww 0xA0700160 0x00004280 # Dynamic Config 3 (cs7)
#
mww 0xA0700104 0x00000203 # CAS latency is 2 at 100 MHz
mww 0xA0700124 0x00000203 # CAS latency is 2 at 100 MHz
mww 0xA0700144 0x00000203 # CAS latency is 2 at 100 MHz
mww 0xA0700164 0x00000203 # CAS latency is 2 at 100 MHz
#
mww 0xA0700020 0x00000103 # issue SDRAM PALL command
#
mww 0xA0700024 0x00000001 # Set the refresh counter to be as small as possible
#
# Add some dummy writes to give the SDRAM time to settle, it needs two
# AHB clock cycles, here we poke in the debugger flag, this lets
# the software know that we are in the debugger
mww 0xA0900000 0x00000002
mww 0xA0900000 0x00000002
mww 0xA0900000 0x00000002
mww 0xA0900000 0x00000002
mww 0xA0900000 0x00000002
#
mdw 0xA0900000
mdw 0xA0900000
mdw 0xA0900000
mdw 0xA0900000
mdw 0xA0900000
#
mww 0xA0700024 0x00000030 # Set the refresh counter to 30
mww 0xA0700020 0x00000083 # Issue SDRAM MODE command
#
# Next we perform a read of RAM.
# mw = move word.
mdw 0x00022000
# mw 0x00022000:P, r3 # 22000 for cas2 latency, 32000 for cas 3
#
mww 0xA0700020 0x00000003 # issue SDRAM NORMAL command
mww 0xA0700100 0x00084280 # Enable buffer access
mww 0xA0700120 0x00084280 # Enable buffer access
mww 0xA0700140 0x00084280 # Enable buffer access
mww 0xA0700160 0x00084280 # Enable buffer access

View File

@ -0,0 +1,36 @@
######################################
# Target: DIGI ConnectCore Wi-9C
######################################
reset_config trst_and_srst
#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
jtag_device 4 0x1 0xf 0xe
jtag_nsrst_delay 200
jtag_ntrst_delay 0
######################
# Target configuration
######################
#target <type> <endianess> <reset mode> <JTAG pos> <variant>
target arm926ejs little reset_init 0 arm926ejs
target_script 0 reset event/wi-9c_reset.script
run_and_halt_time 0 30
#working area <target#> <address> <size> <backup|nobackup>
working_area 0 0x00000000 0x1000 backup
#####################
# Flash configuration
#####################
#M29DW323DB - not working
#flash bank cfi <base> <size> <chip width> <bus width> <target#>
flash bank cfi 0x50000000 0x0400000 2 2 0