Create a init_board procedure for the ea dev board.

Signed-off-by: Chris Morgan <chmorgan@gmail.com>
Change-Id: I082b0d3092c7f3b2ee6b68af64d48c78b31f1dbf
Reviewed-on: http://openocd.zylin.com/510
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
__archive__
Chris Morgan 2012-03-08 14:58:41 -05:00 committed by Spencer Oliver
parent 4aa63d59bd
commit 8fc35a696f
1 changed files with 100 additions and 94 deletions

View File

@ -1,24 +1,10 @@
# Embedded Artists eval board for LPC2478
# http://www.embeddedartists.com/
# Delays on reset lines
adapter_nsrst_delay 500
jtag_ntrst_delay 1
# Adaptive JTAG clocking through RTCK.
#
jtag_rclk 20
# Target device: LPC2478
set CCLK 72000
source [find target/lpc2478.cfg]
# A working area will help speeding the flash programming
$_TARGETNAME configure -work-area-phys 0x40000200 -work-area-size [expr 0x10000-0x200-0x20] -work-area-backup 0
# External 16-bit flash at chip select CS0 (SST39VF3201-70, 4 MiB)
flash bank $_CHIPNAME.extflash cfi 0x80000000 0x400000 2 2 $_TARGETNAME jedec_probe
# Helper
#
proc read_register {register} {
@ -27,6 +13,106 @@ proc read_register {register} {
return $result(0)
}
proc init_board {} {
# Delays on reset lines
adapter_nsrst_delay 500
jtag_ntrst_delay 1
# Adaptive JTAG clocking through RTCK.
#
jtag_rclk 20
global _TARGETNAME
global _CHIPNAME
# A working area will help speeding the flash programming
$_TARGETNAME configure -work-area-phys 0x40000200 -work-area-size [expr 0x10000-0x200-0x20] -work-area-backup 0
# External 16-bit flash at chip select CS0 (SST39VF3201-70, 4 MiB)
flash bank $_CHIPNAME.extflash cfi 0x80000000 0x400000 2 2 $_TARGETNAME jedec_probe
# Event handlers
#
$_TARGETNAME configure -event reset-start {
# Back to the slow JTAG clock
jtag_rclk 20
}
$_TARGETNAME configure -event reset-init {
arm core_state arm
arm7_9 dcc_downloads enable ;# Speed up downloads by using DCC transfer
arm7_9 fast_memory_access enable
# Peripheral clocks
mww 0xE01FC0C4 0x04280FFE ;# PCONP: (reset value)
# Map the user flash to the vector table area (0x00...0x3F)
mww 0xE01FC040 0x00000001 ;# MEMMAP: User flash
# Memory accelerator module
mww 0xE01FC004 0x00000003 ;# MAMTIM: 3 clock cycles
mww 0xE01FC000 0x00000002 ;# MAMCR: fully enabled
# Enable external memory bus (32-bit SDRAM at DYCS0, 16-bit flash at CS0)
mww 0xE002C014 0x55010115 ;# PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0,
# P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0,
# P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3
mww 0xE002C018 0x55555555 ;# PINSEL6: P3.0...P3.15=D0...D15
mww 0xE002C01C 0x55555555 ;# PINSEL7: P3.16...P3.31=D16...D31
mww 0xE002C020 0x55555555 ;# PINSEL8: P4.0...P4.15=A0...A15
mww 0xE002C024 0x50051555 ;# PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE,
# P4.25=WE, P4.30=CS0, P4.31=CS1
mww 0xFFE08000 0x00000001 ;# EMCControl: Enable EMC
# Start PLL, then use faster JTAG clock
enable_pll
jtag_rclk 3000
# 16-bit flash @ CS0 (SST39VF3201-70)
mww 0xFFE08200 0x00080081 ;# EMCStaticConfig0: 16 bit, PB=1, buffers on
mww 0xFFE08204 0x00000000 ;# EMCStaticWaitWen0
mww 0xFFE08208 0x00000000 ;# EMCStaticWaitOen0
mww 0xFFE0820C 0x00000005 ;# EMCStaticWaitRd0
mww 0xFFE08210 0x00000005 ;# EMCStaticWaitPage0
mww 0xFFE08214 0x00000003 ;# EMCStaticWaitWr0
mww 0xFFE08218 0x00000001 ;# EMCStaticWaitTurn0
# 8-bit NAND @ CS1
# TODO
# 32-bit SDRAM @ DYCS0 (K4M563233G-HN75)
mww 0xFFE08028 0x00000001 ;# EMCDynamicReadConfig
mww 0xFFE08030 0x00000001 ;# EMCDynamicRP
mww 0xFFE08034 0x00000003 ;# EMCDynamicRAS
mww 0xFFE08038 0x00000005 ;# EMCDynamicSREX
mww 0xFFE0803C 0x00000001 ;# EMCDynamicAPR
mww 0xFFE08040 0x00000005 ;# EMCDynamicDAL
mww 0xFFE08044 0x00000001 ;# EMCDynamicWR
mww 0xFFE08048 0x00000005 ;# EMCDynamicRC
mww 0xFFE0804C 0x00000005 ;# EMCDynamicRFC
mww 0xFFE08050 0x00000005 ;# EMCDynamicXSR
mww 0xFFE08054 0x00000001 ;# EMCDynamicRRD
mww 0xFFE08058 0x00000001 ;# EMCDynamicMRD
#
mww 0xFFE08104 0x00000202 ;# EMCDynamicRasCas0
mww 0xFFE08100 0x00005488 ;# EMCDynamicConfig0
sleep 100
mww 0xFFE08020 0x00000183 ;# EMCDynamicControl: Clock on continuously, NOP
sleep 10
mww 0xFFE08020 0x00000103 ;# EMCDynamicControl: PRECHARGE-ALL
mww 0xFFE08024 0x00000046 ;# EMCDynamicRefresh
sleep 100
mww 0xFFE08020 0x00000083 ;# EMCDynamicControl: MODE
mdw 0xA0011000 1 ;# Set SDRAM mode register
mww 0xFFE08020 0x00000000 ;# EMCDynamicControl: NORMAL
mww 0xFFE08100 0x00085488 ;# EMCDynamicConfig0: Enable buffers
}
$_TARGETNAME configure -event gdb-attach {
# Without this gdb-attach will first time as probe will fail
reset init
}
}
# Enable the PLL.
# Generate maximum CPU clock (72 MHz) Run from internal RC oscillator.
@ -66,83 +152,3 @@ proc enable_pll {} {
mww 0xE01FC08C 0x00000055 ;# PLLFEED
}
# Event handlers
#
$_TARGETNAME configure -event reset-start {
# Back to the slow JTAG clock
jtag_rclk 20
}
$_TARGETNAME configure -event reset-init {
arm core_state arm
arm7_9 dcc_downloads enable ;# Speed up downloads by using DCC transfer
arm7_9 fast_memory_access enable
# Peripheral clocks
mww 0xE01FC0C4 0x04280FFE ;# PCONP: (reset value)
# Map the user flash to the vector table area (0x00...0x3F)
mww 0xE01FC040 0x00000001 ;# MEMMAP: User flash
# Memory accelerator module
mww 0xE01FC004 0x00000003 ;# MAMTIM: 3 clock cycles
mww 0xE01FC000 0x00000002 ;# MAMCR: fully enabled
# Enable external memory bus (32-bit SDRAM at DYCS0, 16-bit flash at CS0)
mww 0xE002C014 0x55010115 ;# PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0,
# P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0,
# P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3
mww 0xE002C018 0x55555555 ;# PINSEL6: P3.0...P3.15=D0...D15
mww 0xE002C01C 0x55555555 ;# PINSEL7: P3.16...P3.31=D16...D31
mww 0xE002C020 0x55555555 ;# PINSEL8: P4.0...P4.15=A0...A15
mww 0xE002C024 0x50051555 ;# PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE,
# P4.25=WE, P4.30=CS0, P4.31=CS1
mww 0xFFE08000 0x00000001 ;# EMCControl: Enable EMC
# Start PLL, then use faster JTAG clock
enable_pll
jtag_rclk 3000
# 16-bit flash @ CS0 (SST39VF3201-70)
mww 0xFFE08200 0x00080081 ;# EMCStaticConfig0: 16 bit, PB=1, buffers on
mww 0xFFE08204 0x00000000 ;# EMCStaticWaitWen0
mww 0xFFE08208 0x00000000 ;# EMCStaticWaitOen0
mww 0xFFE0820C 0x00000005 ;# EMCStaticWaitRd0
mww 0xFFE08210 0x00000005 ;# EMCStaticWaitPage0
mww 0xFFE08214 0x00000003 ;# EMCStaticWaitWr0
mww 0xFFE08218 0x00000001 ;# EMCStaticWaitTurn0
# 8-bit NAND @ CS1
# TODO
# 32-bit SDRAM @ DYCS0 (K4M563233G-HN75)
mww 0xFFE08028 0x00000001 ;# EMCDynamicReadConfig
mww 0xFFE08030 0x00000001 ;# EMCDynamicRP
mww 0xFFE08034 0x00000003 ;# EMCDynamicRAS
mww 0xFFE08038 0x00000005 ;# EMCDynamicSREX
mww 0xFFE0803C 0x00000001 ;# EMCDynamicAPR
mww 0xFFE08040 0x00000005 ;# EMCDynamicDAL
mww 0xFFE08044 0x00000001 ;# EMCDynamicWR
mww 0xFFE08048 0x00000005 ;# EMCDynamicRC
mww 0xFFE0804C 0x00000005 ;# EMCDynamicRFC
mww 0xFFE08050 0x00000005 ;# EMCDynamicXSR
mww 0xFFE08054 0x00000001 ;# EMCDynamicRRD
mww 0xFFE08058 0x00000001 ;# EMCDynamicMRD
#
mww 0xFFE08104 0x00000202 ;# EMCDynamicRasCas0
mww 0xFFE08100 0x00005488 ;# EMCDynamicConfig0
sleep 100
mww 0xFFE08020 0x00000183 ;# EMCDynamicControl: Clock on continuously, NOP
sleep 10
mww 0xFFE08020 0x00000103 ;# EMCDynamicControl: PRECHARGE-ALL
mww 0xFFE08024 0x00000046 ;# EMCDynamicRefresh
sleep 100
mww 0xFFE08020 0x00000083 ;# EMCDynamicControl: MODE
mdw 0xA0011000 1 ;# Set SDRAM mode register
mww 0xFFE08020 0x00000000 ;# EMCDynamicControl: NORMAL
mww 0xFFE08100 0x00085488 ;# EMCDynamicConfig0: Enable buffers
}