zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Revert "cortex_m3: add auto maskisr" 

This reverts commit ff640f197a.

Original patch reverted as Author's name was incorrectly set.
__archive__
Spencer Oliver 2011-07-04 11:19:19 +01:00
parent bad3ee87ac
commit 89fa8ce2d8
3 changed files with 12 additions and 132 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
doc/openocd.texi
View File

@ -6720,21 +6720,8 @@ If @var{value} is defined, first assigns that.
@subsection Cortex-M3 specific commands
@cindex Cortex-M3
@deffn Command {cortex_m3 maskisr} (@option{auto}|@option{on}|@option{off})
@deffn Command {cortex_m3 maskisr} (@option{on}|@option{off})
Control masking (disabling) interrupts during target step/resume.
The @option{auto} option handles interrupts during stepping a way they get
served but don't disturb the program flow. The step command first allows
pending interrupt handlers to execute, then disables interrupts and steps over
the next instruction where the core was halted. After the step interrupts
are enabled again. If the interrupt handlers don't complete within 500ms,
the step command leaves with the core running.
Note that a free breakpoint is required for the @option{auto} option. If no
breakpoint is available at the time of the step, then the step is taken
with interrupts enabled, i.e. the same way the @option{off} option does.
Default is @option{auto}.
@end deffn
@deffn Command {cortex_m3 vector_catch} [@option{all}|@option{none}|list]

120
src/target/cortex_m3.c
View File

@ -39,7 +39,6 @@
#include "register.h"
#include "arm_opcodes.h"
#include "arm_semihosting.h"
#include <helper/time_support.h>
/* NOTE: most of this should work fine for the Cortex-M1 and
* Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
@ -859,8 +858,6 @@ static int cortex_m3_step(struct target *target, int current,
struct breakpoint *breakpoint = NULL;
struct reg *pc = armv7m->arm.pc;
bool bkpt_inst_found = false;
int retval;
bool isr_timed_out = false;
if (target->state != TARGET_HALTED)
{
@ -894,79 +891,11 @@ static int cortex_m3_step(struct target *target, int current,
* instruction - as such simulate a step */
if (bkpt_inst_found == false)
{
/* Automatic ISR masking mode off: Just step over the next instruction */
if ((cortex_m3->isrmasking_mode != CORTEX_M3_ISRMASK_AUTO))
{
cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
}
else
{
/* Process interrupts during stepping in a way they don't interfere
* debugging.
*
* Principle:
*
* Set a temporary break point at the current pc and let the core run
* with interrupts enabled. Pending interrupts get served and we run
* into the breakpoint again afterwards. Then we step over the next
* instruction with interrupts disabled.
*
* If the pending interrupts don't complete within time, we leave the
* core running. This may happen if the interrupts trigger faster
* than the core can process them or the handler doesn't return.
*
* If no more breakpoints are available we simply do a step with
* interrupts enabled.
*
*/
/* Set a temporary break point */
retval = breakpoint_add(target, pc_value , 2, BKPT_TYPE_BY_ADDR(pc_value));
bool tmp_bp_set = (retval == ERROR_OK);
/* No more breakpoints left, just do a step */
if (!tmp_bp_set)
{
cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
}
else
{
/* Start the core */
LOG_DEBUG("Starting core to serve pending interrupts");
int64_t t_start = timeval_ms();
cortex_m3_write_debug_halt_mask(target, 0, C_HALT | C_STEP);
/* Wait for pending handlers to complete or timeout */
do {
retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
if (retval != ERROR_OK)
{
target->state = TARGET_UNKNOWN;
return retval;
}
isr_timed_out = ((timeval_ms() - t_start) > 500);
} while (!((cortex_m3->dcb_dhcsr & S_HALT) || isr_timed_out));
/* Remove the temporary breakpoint */
breakpoint_remove(target, pc_value);
if (isr_timed_out)
{
LOG_DEBUG("Interrupt handlers didn't complete within time, "
"leaving target running");
}
else
{
/* Step over next instruction with interrupts disabled */
cortex_m3_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
/* Re-enable interrupts */
cortex_m3_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
}
}
}
/* set step and clear halt */
cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT);
}
int retval;
retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr);
if (retval != ERROR_OK)
return retval;
@ -977,13 +906,6 @@ static int cortex_m3_step(struct target *target, int current,
if (breakpoint)
cortex_m3_set_breakpoint(target, breakpoint);
if (isr_timed_out) {
/* Leave the core running. The user has to stop execution manually. */
target->debug_reason = DBG_REASON_NOTHALTED;
target->state = TARGET_RUNNING;
return ERROR_OK;
}
LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
" nvic_icsr = 0x%" PRIx32,
cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr);
@ -2182,15 +2104,6 @@ COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command)
struct cortex_m3_common *cortex_m3 = target_to_cm3(target);
int retval;
static const Jim_Nvp nvp_maskisr_modes[] = {
{ .name = "auto", .value = CORTEX_M3_ISRMASK_AUTO },
{ .name = "off" , .value = CORTEX_M3_ISRMASK_OFF },
{ .name = "on" , .value = CORTEX_M3_ISRMASK_ON },
{ .name = NULL , .value = -1 },
};
const Jim_Nvp *n;
retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3);
if (retval != ERROR_OK)
return retval;
@ -2203,26 +2116,15 @@ COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command)
if (CMD_ARGC > 0)
{
n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]);
if (n->name == NULL)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
cortex_m3->isrmasking_mode = n->value;
if(cortex_m3->isrmasking_mode == CORTEX_M3_ISRMASK_ON)
{
cortex_m3_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0);
}
else
{
cortex_m3_write_debug_halt_mask(target, C_HALT, C_MASKINTS);
}
bool enable;
COMMAND_PARSE_ON_OFF(CMD_ARGV[0], enable);
uint32_t mask_on = C_HALT | (enable ? C_MASKINTS : 0);
uint32_t mask_off = enable ? 0 : C_MASKINTS;
cortex_m3_write_debug_halt_mask(target, mask_on, mask_off);
}
n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m3->isrmasking_mode);
command_print(CMD_CTX, "cortex_m3 interrupt mask %s", n->name);
command_print(CMD_CTX, "cortex_m3 interrupt mask %s",
(cortex_m3->dcb_dhcsr & C_MASKINTS) ? "on" : "off");
return ERROR_OK;
}
@ -2272,7 +2174,7 @@ static const struct command_registration cortex_m3_exec_command_handlers[] = {
.handler = handle_cortex_m3_mask_interrupts_command,
.mode = COMMAND_EXEC,
.help = "mask cortex_m3 interrupts",
.usage = "['auto'|'on'|'off']",
.usage = "['on'|'off']",
},
{
.name = "vector_catch",

9
src/target/cortex_m3.h
View File

@ -140,13 +140,6 @@ enum cortex_m3_soft_reset_config
CORTEX_M3_RESET_VECTRESET,
};
enum cortex_m3_isrmasking_mode
{
CORTEX_M3_ISRMASK_AUTO,
CORTEX_M3_ISRMASK_OFF,
CORTEX_M3_ISRMASK_ON,
};
struct cortex_m3_common
{
int common_magic;
@ -173,8 +166,6 @@ struct cortex_m3_common
enum cortex_m3_soft_reset_config soft_reset_config;
enum cortex_m3_isrmasking_mode isrmasking_mode;
struct armv7m_common armv7m;
};