zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tcl/board: add config for 8devices LIMA board 

More information about this board can be found here:
https://www.8devices.com/products/lima

Change-Id: Id35a35d3e986630d58d37b47828870afd107cc6a
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4406
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
bscan_tunnel
Oleksij Rempel 2018-01-31 11:58:50 +01:00 committed by Paul Fertser
parent 8e8b50f65d
commit 87610a4179
1 changed files with 30 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
tcl/board/8devices-lima.cfg Normal file
View File

@ -0,0 +1,30 @@
# Product page:
# https://www.8devices.com/products/lima
#
# Location of JTAG pins:
# J2 GPIO0 JTAG TCK
# J2 GPIO1 JTAG TDI
# J2 GPIO2 JTAG TDO
# J2 GPIO3 JTAG TMS
# J2 RST directly connected to RESET_L of the SoC and can be used as
# JTAG SRST. Note: this pin will also reset the debug engine.
# J1 +3,3V Can be use as JTAG Vref
# J1 or J2 GND Can be used for JTAG GND
#
# This board is powered from mini USB connecter which is also used
# as USB to UART converted based on FTDI FT230XQ chip
source [find target/qualcomm_qca4531.cfg]
proc board_init { } {
qca4531_ddr2_550_550_init
}
$_TARGETNAME configure -event reset-init {
board_init
}
set ram_boot_address 0xa0000000
$_TARGETNAME configure -work-area-phys 0xa1FFE000 -work-area-size 0x1000
flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0