- correctly enter debug state on a "soft_reset_halt" command

- several small fixes
- retry reading from a FT2232 device on incomplete reads


git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60
__archive__
drath 2006-11-05 17:38:35 +00:00
parent 456737b08b
commit 83440065c0
6 changed files with 88 additions and 43 deletions

View File

@ -46,6 +46,7 @@
* variant 2 (lpc2000_v2):
* - 213x
* - 214x
* - 2101|2|3
*/
int lpc2000_register_commands(struct command_context_s *cmd_ctx);
@ -152,6 +153,12 @@ int lpc2000_build_sector_list(struct flash_bank_s *bank)
/* variant 2 has a uniform layout, only number of sectors differs */
switch (bank->size)
{
case 8 * 1024:
num_sectors = 2;
break;
case 16 * 1024:
num_sectors = 4;
break;
case 32 * 1024:
num_sectors = 8;
break;

View File

@ -400,7 +400,7 @@ int command_run_file(command_context_t *context, FILE *file, enum command_mode m
break;
/* run line */
if (command_run_line(context, cmd) == ERROR_COMMAND_CLOSE_CONNECTION)
if ((retval = command_run_line(context, cmd)) == ERROR_COMMAND_CLOSE_CONNECTION)
break;
}

View File

@ -189,15 +189,19 @@ int ft2232_read(u8* buf, int size, u32* bytes_read)
#if BUILD_FT2232_FTD2XX == 1
DWORD dw_bytes_read;
FT_STATUS status;
if ((status = FT_Read(ftdih, buf, size, &dw_bytes_read)) != FT_OK)
{
*bytes_read = dw_bytes_read;
ERROR("FT_Read returned: %i", status);
return ERROR_JTAG_DEVICE_ERROR;
}
*bytes_read = dw_bytes_read;
return ERROR_OK;
int timeout = 5;
*bytes_read = 0;
while ((*bytes_read < size) && timeout--)
{
if ((status = FT_Read(ftdih, buf, size, &dw_bytes_read)) != FT_OK)
{
*bytes_read = 0;
ERROR("FT_Read returned: %i", status);
return ERROR_JTAG_DEVICE_ERROR;
}
*bytes_read += dw_bytes_read;
}
#elif BUILD_FT2232_LIBFTDI == 1
int retval;
int timeout = 100;
@ -213,8 +217,15 @@ int ft2232_read(u8* buf, int size, u32* bytes_read)
}
*bytes_read += retval;
}
return ERROR_OK;
#endif
if (*bytes_read < size)
{
ERROR("couldn't read the requested number of bytes from FT2232 device (%i < %i)", *bytes_read, size);
return ERROR_JTAG_DEVICE_ERROR;
}
return ERROR_OK;
}
int ft2232_speed(int speed)

View File

@ -656,6 +656,9 @@ int arm7_9_assert_reset(target_t *target)
if (target->state == TARGET_HALTED || target->state == TARGET_UNKNOWN)
{
/* if the target wasn't running, there might be working areas allocated */
target_free_all_working_areas(target);
/* assert SRST and TRST */
/* system would get ouf sync if we didn't reset test-logic, too */
if ((retval = jtag_add_reset(1, 1)) != ERROR_OK)
@ -724,11 +727,44 @@ int arm7_9_deassert_reset(target_t *target)
}
int arm7_9_clear_halt(target_t *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
if (arm7_9->use_dbgrq)
{
/* program EmbeddedICE Debug Control Register to deassert DBGRQ
*/
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
embeddedice_store_reg(dbg_ctrl);
}
else
{
/* restore registers if watchpoint unit 0 was in use
*/
if (arm7_9->wp0_used)
{
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK]);
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK]);
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK]);
}
/* control value always has to be restored, as it was either disabled,
* or enabled with possibly different bits
*/
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE]);
}
return ERROR_OK;
}
int arm7_9_soft_reset_halt(struct target_s *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
int i;
if (target->state == TARGET_RUNNING)
@ -743,6 +779,26 @@ int arm7_9_soft_reset_halt(struct target_s *target)
}
target->state = TARGET_HALTED;
/* program EmbeddedICE Debug Control Register to assert DBGACK and INTDIS
* ensure that DBGRQ is cleared
*/
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGACK, 1, 1);
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_INTDIS, 1, 1);
embeddedice_store_reg(dbg_ctrl);
arm7_9_clear_halt(target);
/* if the target is in Thumb state, change to ARM state */
if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_ITBIT, 1))
{
u32 r0_thumb, pc_thumb;
DEBUG("target entered debug from Thumb state, changing to ARM");
/* Entered debug from Thumb mode */
armv4_5->core_state = ARMV4_5_STATE_THUMB;
arm7_9->change_to_arm(target, &r0_thumb, &pc_thumb);
}
/* all register content is now invalid */
armv4_5_invalidate_core_regs(target);
@ -819,38 +875,6 @@ int arm7_9_halt(target_t *target)
return ERROR_OK;
}
int arm7_9_clear_halt(target_t *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
if (arm7_9->use_dbgrq)
{
/* program EmbeddedICE Debug Control Register to deassert DBGRQ
*/
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
embeddedice_store_reg(dbg_ctrl);
}
else
{
/* restore registers if watchpoint unit 0 was in use
*/
if (arm7_9->wp0_used)
{
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK]);
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK]);
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK]);
}
/* control value always has to be restored, as it was either disabled,
* or enabled with possibly different bits
*/
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE]);
}
return ERROR_OK;
}
int arm7_9_debug_entry(target_t *target)
{
int i;

View File

@ -167,6 +167,10 @@ int watchpoint_add(target_t *target, u32 address, u32 length, enum watchpoint_rw
INFO("can't add %s watchpoint, resource not available", watchpoint_rw_strings[rw]);
return retval;
break;
case ERROR_TARGET_NOT_HALTED:
INFO("can't add watchpoint while target is running");
return retval;
break;
default:
ERROR("unknown error");
exit(-1);

View File

@ -904,7 +904,6 @@ int handle_target_command(struct command_context_s *cmd_ctx, char *cmd, char **a
(*last_target_p)->working_areas = NULL;
(*last_target_p)->backup_working_area = 0;
(*last_target_p)->endianness = TARGET_LITTLE_ENDIAN;
(*last_target_p)->state = TARGET_UNKNOWN;
(*last_target_p)->reg_cache = NULL;
(*last_target_p)->breakpoints = NULL;