tcl: add ASUS RT-N66U config

CFI flashing verified with real hardware. RAM configuration wasn't
attempted.

Change-Id: I9185ab71430d799793befef708a15f62edba1663
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2153
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
__archive__
Paul Fertser 2014-05-24 10:04:14 +04:00 committed by Andreas Fritiofson
parent 5375a9e1d8
commit 76a765adbc
3 changed files with 27 additions and 0 deletions

View File

@ -0,0 +1,19 @@
#
# http://wikidevi.com/wiki/Asus_RT-N66U
#
echo "ATTENTION: you need to solder a 4.7-10k pullup resistor to pin 21 of flash IC"
echo "to enable JTAG, see http://wl500g.info/album.php?albumid=28&attachmentid=8991 ,"
echo "there is an unpopulated footprint near U8.\n"
set partition_list {
CFE { Bootloader 0xbc000000 0x00040000 }
firmware { "Kernel+rootfs" 0xbc040000 0x01fa0000 }
nvram { "Config space" 0xbdfe0000 0x00020000 }
}
source [find target/bcm4706.cfg]
# External 32MB NOR Flash (Spansion S29GL256P10TF101
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0xbc000000 0x02000000 2 2 $_TARGETNAME

7
tcl/target/bcm4706.cfg Normal file
View File

@ -0,0 +1,7 @@
set _CHIPNAME bcm4706
set _CPUID 0x1008c17f
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUID
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME mips_m4k -endian little -chain-position $_TARGETNAME

View File

@ -3,6 +3,7 @@ echo "Use -c firmware_help to get help\n"
set known_boards {
"asus-rt-n16 ASUS RT-N16"
"asus-rt-n66u ASUS RT-N66U"
"linksys-wrt54gl Linksys WRT54GL v1.1"
"netgear-dg834v3 Netgear DG834G v3"
"bt-homehubv1 BT HomeHub v1"