zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

jtag: getting the JTAG speed can fail 

If the JTAG speed has not been set, then it has no defined
value, add code to propagate the error.

No change to actual behavior as no new failure paths have
been introduced. This is a no-op patch to make subsequent patches
smaller.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
__archive__
Øyvind Harboe 2010-12-06 09:21:23 +01:00
parent 5cd931ed1c
commit 740b9e25b4
11 changed files with 71 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
src/jtag/core.c
View File

@ -1384,9 +1384,13 @@ int adapter_init(struct command_context *cmd_ctx)
int requested_khz = jtag_get_speed_khz();
int actual_khz = requested_khz;
int retval = jtag_get_speed_readable(&actual_khz);
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
retval = jtag_get_speed_readable(&actual_khz);
if (ERROR_OK != retval)
LOG_INFO("adapter-specific clock speed value %d", jtag_get_speed());
LOG_INFO("adapter-specific clock speed value %d", jtag_speed_var);
else if (actual_khz)
{
/* Adaptive clocking -- JTAG-specific */
@ -1632,30 +1636,33 @@ int jtag_config_rclk(unsigned fallback_speed_khz)
return (ERROR_OK != retval) ? retval : jtag_set_speed(speed);
}
int jtag_get_speed(void)
int jtag_get_speed(int *speed)
{
int speed = 0; /* avoid -O3 warning */
switch(clock_mode)
{
case CLOCK_MODE_SPEED:
speed = jtag_speed;
*speed = jtag_speed;
break;
case CLOCK_MODE_KHZ:
adapter_khz_to_speed(jtag_get_speed_khz(), &speed);
adapter_khz_to_speed(jtag_get_speed_khz(), speed);
break;
case CLOCK_MODE_RCLK:
jtag_rclk_to_speed(rclk_fallback_speed_khz, &speed);
jtag_rclk_to_speed(rclk_fallback_speed_khz, speed);
break;
default:
LOG_ERROR("BUG: unknown jtag clock mode");
break;
return ERROR_FAIL;
}
return speed;
return ERROR_OK;
}
int jtag_get_speed_readable(int *khz)
{
return jtag ? jtag->speed_div(jtag_get_speed(), khz) : ERROR_OK;
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
return jtag ? jtag->speed_div(jtag_speed_var, khz) : ERROR_OK;
}
void jtag_set_verify(bool enable)

19
src/jtag/drivers/amt_jtagaccel.c
View File

@ -191,7 +191,8 @@ static void amt_jtagaccel_state_move(void)
aw_scan_tms_5 = 0x40 | (tms_scan[0] & 0x1f);
AMT_AW(aw_scan_tms_5);
int jtag_speed = jtag_get_speed();
int retval = jtag_get_speed(&jtag_speed);
assert(retval == ERROR_OK);
if (jtag_speed > 3 || rtck_enabled)
amt_wait_scan_busy();
@ -249,7 +250,9 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
uint8_t dr_tdo;
uint8_t aw_tms_scan;
uint8_t tms_scan[2];
int jtag_speed = jtag_get_speed();
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
assert(retval == ERROR_OK);
if (ir_scan)
amt_jtagaccel_end_state(TAP_IRSHIFT);
@ -267,7 +270,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
dw_tdi_scan = buf_get_u32(buffer, bit_count, (scan_size - 1) % 8) & 0xff;
AMT_DW(dw_tdi_scan);
if (jtag_speed > 3 || rtck_enabled)
if (jtag_speed_var > 3 || rtck_enabled)
amt_wait_scan_busy();
if ((type == SCAN_IN) || (type == SCAN_IO))
@ -285,7 +288,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
{
dw_tdi_scan = buf_get_u32(buffer, bit_count, 8) & 0xff;
AMT_DW(dw_tdi_scan);
if (jtag_speed > 3 || rtck_enabled)
if (jtag_speed_var > 3 || rtck_enabled)
amt_wait_scan_busy();
if ((type == SCAN_IN) || (type == SCAN_IO))
@ -302,7 +305,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
tms_scan[1] = amt_jtagaccel_tap_move[tap_move_ndx(tap_get_state())][tap_move_ndx(tap_get_end_state())][1];
aw_tms_scan = 0x40 | (tms_scan[0] & 0x1f) | (buf_get_u32(buffer, bit_count, 1) << 5);
AMT_AW(aw_tms_scan);
if (jtag_speed > 3 || rtck_enabled)
if (jtag_speed_var > 3 || rtck_enabled)
amt_wait_scan_busy();
if ((type == SCAN_IN) || (type == SCAN_IO))
@ -316,7 +319,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
{
aw_tms_scan = 0x40 | (tms_scan[1] & 0x1f);
AMT_AW(aw_tms_scan);
if (jtag_speed > 3 || rtck_enabled)
if (jtag_speed_var > 3 || rtck_enabled)
amt_wait_scan_busy();
}
tap_set_state(tap_get_end_state());
@ -502,7 +505,9 @@ static int amt_jtagaccel_init(void)
aw_control_fsm |= 0x04;
AMT_AW(aw_control_fsm);
amt_jtagaccel_speed(jtag_get_speed());
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
amt_jtagaccel_speed(jtag_speed_var);
enum reset_types jtag_reset_config = jtag_get_reset_config();
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)

6
src/jtag/drivers/ft2232.c
View File

@ -2395,7 +2395,11 @@ static int ft2232_init(void)
return ERROR_JTAG_INIT_FAILED;
}
ft2232_speed(jtag_get_speed());
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
ft2232_speed(jtag_speed_var);
buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */
if ((retval = ft2232_write(buf, 1, &bytes_written)) != ERROR_OK)

6
src/jtag/drivers/gw16012.c
View File

@ -529,7 +529,11 @@ static int gw16012_init(void)
gw16012_input(&status_port);
gw16012_msb = (status_port & 0x80) ^ 0x80;
gw16012_speed(jtag_get_speed());
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
gw16012_speed(jtag_speed_var);
gw16012_reset(0, 0);
return ERROR_OK;

6
src/jtag/drivers/jlink.c
View File

@ -321,7 +321,11 @@ static int jlink_init(void)
jlink_reset(0, 0);
jtag_sleep(3000);
jlink_tap_init();
jlink_speed(jtag_get_speed());
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
jlink_speed(jtag_speed_var);
/* v5/6 jlink seems to have an issue if the first tap move
* is not divisible by 8, so we send a TLR on first power up */

8
src/jtag/drivers/parport.c
View File

@ -384,7 +384,9 @@ static int parport_init(void)
bitbang_interface = &parport_bitbang;
wait_states = jtag_get_speed();
int retval = jtag_get_speed(&wait_states);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
@ -475,7 +477,9 @@ COMMAND_HANDLER(parport_handle_parport_toggling_time_command)
}
parport_toggling_time_ns = ns;
wait_states = jtag_get_speed();
int retval = jtag_get_speed(&wait_states);
if (retval != ERROR_OK)
return retval;
}
command_print(CMD_CTX, "parport toggling time = %" PRIu32 " ns",

6
src/jtag/drivers/presto.c
View File

@ -770,7 +770,11 @@ static int presto_jtag_init(void)
LOG_INFO("PRESTO open, serial number '%s'", presto->serial);
/* use JTAG speed setting from configuration file */
presto_jtag_speed(jtag_get_speed());
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
presto_jtag_speed(jtag_speed_var);
bitq_interface = &presto_bitq;
return ERROR_OK;

6
src/jtag/drivers/rlink.c
View File

@ -1771,7 +1771,11 @@ int rlink_init(void)
tap_state_queue_init();
dtc_queue_init();
rlink_speed(jtag_get_speed());
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
rlink_speed(jtag_speed_var);
rlink_reset(0, 0);
return ERROR_OK;

6
src/jtag/drivers/usb_blaster.c
View File

@ -442,7 +442,11 @@ static int usb_blaster_init(void)
bitbang_interface = &usb_blaster_bitbang;
usb_blaster_speed(jtag_get_speed());
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
usb_blaster_speed(jtag_speed_var);
#if 0
#if BUILD_USB_BLASTER_FTD2XX == 1

2
src/jtag/jtag.h
View File

@ -239,7 +239,7 @@ int jtag_call_event_callbacks(enum jtag_event event);
/// @returns The current JTAG speed setting.
int jtag_get_speed(void);
int jtag_get_speed(int *speed);
/**
* Given a @a speed setting, use the interface @c speed_div callback to

6
src/jtag/zy1000/zy1000.c
View File

@ -1620,7 +1620,11 @@ int zy1000_init(void)
/* deassert resets. Important to avoid infinite loop waiting for SRST to deassert */
zy1000_reset(0, 0);
zy1000_speed(jtag_get_speed());
int jtag_speed_var;
int retval = jtag_get_speed(&jtag_speed_var);
if (retval != ERROR_OK)
return retval;
zy1000_speed(jtag_speed_var);
#if BUILD_ECOSBOARD